Used Packaging Equipment for Sale
Used packaging equipment includes the machinery used to fill, seal, label, wrap, cart, inspect, and prepare products for shipment across a wide range of industries. These systems are used in food and beverage, pharmaceutical, cosmetic, chemical, and consumer goods manufacturing where speed, accuracy, and repeatability are critical. Aaron Equipment offers used packaging equipment for sale in many configurations, from standalone fillers and labelers to complete packaging lines. Browse available inventory below or review specific packaging equipment types to find equipment that fits your production requirements.
Stock No.:
73569008Used Pillar Technologies Unifolier U2P Tamper Evident Induction Sealer – 2000 Watt System (2012)
Used Pillar Technologies Unifolier U2P Tamper Evident Induction Sealer 2000 Watt System. Sealing head 26" long x 5" wide. 1/50/60/208/240 volt. Order# 63197-1. Built 2012. Overall dimensions 35" x 26" x 55"T.
MFR: Pillar
Stock No.:
73569009Used Tamper Evident System Pillar Technologies Unifolier U2P Induction Sealer – 2000 Watt Tamper Evident System (2010)
Used Tamper Evident System Pillar Technologies Unifolier U2P Induction Sealer 2000 Watt. Sealing head 26" long x 5" wide. 1/50/60/208/240 volt. Order# 62852-1. Built 2010. Overall dimensions 35" x 26" x 55"T.
MFR: Pillar
Stock No.:
73124001Used Pizzamatic ValuTop Applicator – Model SD-18-SE-1L1h, 25 PPM, Border-Free
Used Pizzamatic ValuTop Applicator, Model SD-18-SE-1L1h. Single lane operation. Border free application. Conveyor line height range: 34"- 38". 230VAC/3ph/50 or 60 Hz, pneumatic - 30psi/3CFM. Sanitary design with full wash down capability. Heavy duty stainless steel construction. Target/crust diameter range up to 16" (15" maximum pattern). Fully adjustable uniform pattern spread. Nominal speed: up to 25ppm on 12" patterns (13" crust diameters). Product transfer conveyor - eagle round belting. Portion conveyor - food approved flat belting and integral load cell. Mfg. 2014. Must be used in a refrigerated room.
Stock No.:
73138001Used Plan-It Packaging Neptune HGMAK Duplex Horizontal Bagger with Scale & Nitrogen
Used- Plan-It Packaging Systems Horizontal Bagger with Combination Scale and Nitrogen Generator, Model Neptune HGMAK Duplex. Gas flush, duplex system. Servo controlled.
MFR: Plan It Packaging Systems
Stock No.:
73068001Used PMI ST-601 Large Frame Shrink Tunnel | 18" x 48" Chamber | 41.5" Conveyor
Used PMI Model ST-601 Large Frame Shrink Tunnel. Chamber height: 18" x Width: 48". Conveyor width: 41-1/2", conveyor height: adjustable legs from 36" - 42". Overall dimensions 13-1/2' x 80". 3/60/480 volt.
MFR: PMI
Stock No.:
70120009Used PMI SI-TW-30SS Tray Shrink Wrapper & Heat Tunnel | Stainless Steel Shrink Packaging System
Used PMI SI-TW-30SS Tray Shrink Wrapper & Heat Tunnel | Stainless Steel Shrink Packaging System. Stainless steel construction. 30" wide seal bar with 9.5" clearance. Adjustable feet (conveyor currently set at 40.5") 480 vac 3 ph power required. Overall dimensions are 80" wide x 162" long x 95" tall. Serial number 02499. Last running food products.
MFR: PMI
Stock No.:
70970405Used PMI GR-35D Dual Lane Multi-Pack Shrink Bundler – 15-20 CPM, Integrated Shrink Tunnel
Used- PMI Model GR-35D Dual Lane Multi-Pack Shrink Bundler. Equipped with right angle infeed with automatic 1:2 container lane divider and integrated shrink tunnel. Dual Main Rams. Production rates of 15- 20 cycles per minute. Maximum 20" film diameter. Allen Bradley SLC 5/05 PLC controls, A/B Panelview 1000 HMI screen, (6) A/B powerflex 70 and (3) A/B Ultra 3000i Servo drives for divider, divider conveyor and main ram. Pneumatic seal bar actuation. Includes integrated Shrink tunnel 36" wide with 13" total Height. 3/60/460 Volt.
MFR: PMI
Stock No.:
72396001Stainless PMR 1300 Filler Sealer for Tubs & Cups – Dual Lane, Rollstock, 30 CPM
Used- PMR Model 1300 Dual Lane Cup/Tub Filler Sealer Lidder. Stainless Steel Sanitary. Rated at approximately 30 containers per minute. Dual lane. Current container diameter is approximately 6". Has roll stock heat sealer and die cutter, and overlidder. All stainless steel sanitary system. 440 volt system. Allen Bradley Micrologic controller. Allen Bradley Powerflex speed controller. Allen Bradley Panelview 300 control pad. Unit is portable on casters. 19' overall in length, 48" wide, 65" high.
Stock No.:
73102012High-Speed Shrink Wrap Bundler with Integrated Tunnel – Poly Pack CMS-24-HL
Used- Poly Pack CMS-24-HL Shrink Bundler. Continuous motion design capable of speeds up to 55 bundles/trays per minute. Has 25-1/2" wide seal jaw, jaw travel height of 13", and 75" long x 24" wide x 18" tall shrink tunnel. Allen Bradley Micro Logix 1400 PLC, A/B Kinetix 300, and Schneider Magelis HMI. Equipped with infeed belt conveyor 41" long x 19-3/4" wide, transfer infeed belt conveyor through film 26-1/2" long x 21-1/2" wide, and outfeed roller conveyor 153" long x 25" wide. All stainless steel frame with integrated shrink tunnel. Cooling fans on discharge. Last used in pharmaceutical packaging operation with 21" wide film. Right to left operation, mounted on casters. 480V/3Ph/60Hz. Footprint 22' long x 64" wide x 82" tall. Built in 2011.
MFR: PolyPack
Stock No.:
73568001Used Polypack Model CHA-24HL-A Stainless Steel Bundler | 20 Bundles/Min | Servo Driven | Allen Bradley PLC | 240V | Cosmetic Packaging Line
Used Polypack Model CHA-24HL-A Stainless Steel Bundler | 20 Bundles/Min | Servo Driven | Allen Bradley PLC | 240V | Cosmetic Packaging Line. 4.5"W x 42"L table top chain infeed to pushing station for single or multi packs to secondary servo driven pusher to advance product through film. Allen Bradley Micrologix 1500 PLC. 3/60/240V. Last used in cosmetic application.
MFR: PolyPack
Stock No.:
70193070Used Poly Pack Inline Sleeve Wrapper with Heat Tunnel | Model IL-24 Shrink Packaging System
Used Poly Pack Inline Sleeve Wrapper with Heat Tunnel | Model IL-24 Shrink Packaging System. Belt to belt transfers, infeed conveyor belt 32 in. long x 19.75 in. wide x 40 in. tall, discharge conveyor belt 17 in. long x 19.75 in. wide. Seal bar 26 in. wide, currently set for 7.5 in. tall clearance. Heat tunnel with SS rod belt 120 in. long x 26 in. wide x 40 in. tall. Tunnel 60 in. long, aperture 27 in. wide x 14 in. tall, with ambient cooling fan on discharge. Digital temp controls for tunnel and seal bar. PLC Controls with Idec programmable controller. Has stainless steel main frame. Electrical requirements 480-volt, 3 phase, 60 hz, 32 amp.
MFR: PolyPack
Stock No.:
73664001Used PolyPack CLP-24 Unsupported Print Registered Multipacker and Shrink Bundler
Used Polypack CLP-24 (3) Unsupported Print Registered Multipacker and Shrink Bundler. Capable of speeds up to 200 packs / minute, depending on setup. Currently set up for 12 oz. bottles in a 12 pack and 24 pack configuration, 16.9 oz. in 6 pack, 12 pack and 24 pack configuration and a 20oz in 24 pack configuration, 20oz Bullet 24 pack, 1 liter 6 pack and 12 pack, 1 liter Bullet 6 and 12 packs. 2.5 Mil film thickness. Set up to run print registered or clear film. Control panel with Schneider Electric Magelis HMI, Schneider electric PLC, Schneider electric variable speed drives and servo drives. Currently setup with 6 lanes. Serial# 3881. Built 11/2014. 3/60/480 Volt, 60 Amp. Overall footprint 520" long x 85" wide x 81" tall. Suitable for high-speed shrink bundling and multipacking of beverage bottles, bottled water, retail bottle packs, and unsupported multipack configurations using clear or print registered shrink film.
MFR: PolyPack
Types of Used Packaging Equipment Available
Aaron Equipment offers a broad range of used packaging equipment designed for different container types, product formats, and line speeds:
Fillers Liquid Monoblock – Integrated filling and capping systems designed for efficient handling of liquid products in compact packaging lines.
Form and Fill Vertical Auger Fillers – Vertical packaging systems commonly used for powders and granular products requiring consistent fill weights.
Form and Fill Horizontal Pre Made Bags – Machines built to fill and seal premade pouches for flexible packaging applications.
Labelers Pressure Sensitive Print & Apply – Automated labeling systems used to apply variable product, case, or shipping labels at production speeds.
Shrink Equipment Shrink Tunnels – Heat tunnel systems used to shrink film tightly around packaged products for bundling or tamper evidence.
Wrappers Horizontal Flow – High-speed wrappers designed for flow wrapping individual products in film for retail or distribution packaging.
Packaging Equipment Applications & Industry Uses
Used packaging equipment supports end-of-line and primary packaging operations where products must be filled, counted, labeled, inspected, wrapped, or case packed efficiently. These systems are widely used in food processing, nutraceutical and pharmaceutical manufacturing, personal care production, chemicals, and general industrial packaging. Typical applications include pouch filling, bottle filling, cartoning, shrink wrapping, coding, metal detection, and pallet-ready case packaging for finished goods.
Used Packaging Equipment Buying Considerations
When selecting used packaging equipment, evaluate the line requirements as well as the machine condition:
Package Format: Confirm the equipment matches your container style, pouch format, carton size, or film type.
Throughput Requirements: Make sure the machine speed aligns with your target production volume.
Product Characteristics: Consider whether you are packaging liquids, powders, tablets, granules, or solids.
Integration & Controls: Review compatibility with existing conveyors, coders, inspection systems, and plant automation.
Condition & Change Parts: Inspect wear items, available tooling, change parts, and maintenance history when available.
Why Buy Used Packaging Equipment
Buying used packaging equipment can lower capital costs while providing access to proven machinery for filling, labeling, wrapping, and case handling operations. Many systems are available for immediate shipment, which can help reduce downtime and avoid long OEM lead times. Used packaging equipment also gives processors flexibility when expanding a line, replacing a machine, or adding capacity without the expense of buying new.
Sell Your Used Packaging Equipment
Aaron Equipment purchases surplus and used packaging equipment, including fillers, labelers, wrappers, cartoners, and complete packaging lines. If you are upgrading equipment, consolidating lines, or liquidating plant assets, our team can assist with buyouts or consignment opportunities.
Packaging equipment refers to industrial machinery used to prepare products for sale, shipment, or storage. This includes systems for filling, sealing, labeling, coding, wrapping, cartoning, case packing, and inspection. Used packaging equipment helps manufacturers support production needs while reducing upfront capital investment.
Common types of used packaging equipment include fillers, cappers, cartoners, labelers, wrappers, shrink systems, checkweighers, metal detectors, conveyors, and complete packaging lines. Each type is designed for specific product formats, packaging materials, and production speeds.
Choosing the right packaging equipment depends on your product type, container or package style, target throughput, and level of automation. It is also important to evaluate line integration, available change parts, and machine condition to ensure the equipment fits your process and packaging goals.
Yes. Aaron Equipment purchases used packaging equipment across a wide range of categories, from individual machines to complete packaging lines. If you have surplus packaging machinery available, our team can review the equipment and discuss buyout or consignment options.
The cost of used packaging equipment depends on the machine type, manufacturer, speed, configuration, age, and overall condition. Standalone units and complete automated lines can vary widely in price. Contacting a sales representative can help identify available options based on your budget and application.