Used Industrial Mixers & Blenders for Sale
Used industrial mixers and used blenders are processing systems designed to combine, disperse, emulsify, or homogenize materials across a wide range of industries. These machines handle powders, granules, liquids, and high-viscosity materials in both batch and continuous operations. Common applications include food processing, chemicals, pharmaceuticals, plastics, and cosmetics manufacturing. Aaron Equipment offers a large inventory of used industrial mixers and blenders in various configurations to support specific mixing requirements, production capacities, and material characteristics.
Stock No.:
51258020Used Industrial Ribbon Blender, 200 Cubic Foot, Stainless Steel, 50 HP with Rotary Valve
Used Stainless Steel Double Spiral Ribbon Blender. Approximate 200 cubic foot capacity. Has top cover and (2) bag dump stations. 50 HP motor & reducer. Center bottom outlet with rotary valve.
Stock No.:
53147081Used Aaron Process 200 Gallon (26.74 cubic feet) capacity Vacuum Drying Sigma Mixer – All Stainless, 125 HP, Jacketed, ASME
Used Aaron Process 200 Gallon (26.74 cubic feet) capacity Vacuum Drying Sigma Mixer All Stainless, 125 HP, Jacketed, ASME. Cored shafts, jacketed trough, and double nobben blades. Model MBG200-125 All stainless steel construction. All parts are insulated and sheathed with 304 Stainless steel and polished to 150 - 180 grit finish. Mixing/drying chamber includes vacuum cover and is jacketed, rated for 200 PSI at 450 degrees Fahrenheit / negative 20 degrees Fahrenheit, ASME code constructed. Mixing chamber measures 48" x 40" x 44" deep and includes (2) 6" diameter flanged discharges with ball valves. Blades are overlapping double nobben blades and driven by 125 HP motor thru heavy duty gearbox, 160 Amps and 460 volts. Manufactured in 2000. Serial number 00200125643MBG. Previously used in clean room type environment. Complete with control panel and unitized on heavy duty frame. Includes main control panel, power panel with starters and VFD's, steam-to-water heat exchanger for heating of jacket and hydraulic pump/reservoir for opening vessel lid. Also includes top mounted, stainless steel Mikro Pulsaire dust collector, Model 10-2-FV TR.
MFR: Aaron Process
Stock No.:
48594Used Werner & Pfleiderer Mixer/Extruder – Type UK12-AU3, 21 Gallon Capacity, Carbon Steel
Used- Werner & Pfleiderer Mixer/Extruder, Type UK12-AU3. 21 Gallon (80 liter) working capacity, 29.1 gallon (110 liter) total capacity. Material of construction is carbon steel on product contact parts. 20-1/2" (530 mm) long x 20-1/2" (530 mm) width x 19-1/2" (500 mm) deep jacketed bowl. Jacket estimated rated for 75 psi (5 bar). Sigma style blades with a speed of 17/21 RPM. Tangential. 6" (150 mm) dia. screw shafts. Standard packing glands. Counter balanced top cover. Screw product discharge. Belt driven thru gearbox by a 22.5HP/15 kw-380V/50cycle/3Ph-1475 RPM motor. Safety belt cover. Screw product discharge by a 11.25HP/7.5Kw-380volt/50cycle/3Ph motor. Frame mounted. Overall dimensions: 85" (2600 mm) long x 52" (1600 mm) width x 5.9" (1800 mm) high. Weight 3 tonnes. Serial # 193951. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.
MFR: Werner & Pfleiderer
Stock No.:
52357001Used Morton Machine Plow Mixer, Model FKM600D | 600 Liter (21.18 Cu Ft) | 321 Stainless Steel | 50 HP | Pneumatic Discharge | Side Chopper Provision
Used- Morton Machine Plow Mixer, Model FKM600D, 321 Stainless Steel. Total capacity 21.18 cubic foot (600 liter), working capacity 14.13 cubic foot (400 liter). Approximately 790mm (31.1") diameter x 1240mm (48.8") long mixing chamber. Internal plows, driven by approximate 37kW (50hp) motor, thru gear box, 14:1 ratio. (2) 400 (15.75") x 450mm (17.7") side access doors. Openings top: 350mm (13.78"), 250mm (9.84"). 450mm (17.7") Center bottom outlet with 300 (11.8") x 240mm (9.45") sandwich type pneumatically operated door. Provision for side choppers. Mounted on frame. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.
MFR: Morton
Stock No.:
51258016222 Cu Ft Used Stainless Steel Ribbon Blender with Jacket, Top Cover, Bottom Outlet Valve
Used Stainless Steel Jacketed Double Spiral Ribbon Blender, Approximate 222 cubic foot. With top cover and bag dump station. 75 HP motor & reducer. Center bottom outlet with valve. Jacket certified by Arrow Tank. National Board # 13639. Serial# 16460.
Stock No.:
79477Used - American Process TD-24 Cylindrical Plow Mixer, 24 Cu. Ft., Stainless Steel
Used- American Process Cylindrical Plow Mixer, Model TD-24, Approximate 24 Cubic Feet Working Capacity, Stainless Steel. Non-jacketed chamber 30" diameter x 84" long, shaft with fixed plows and end scrapers. Driven by a 30 hp, 3/60/460 volt, 1780 rpm motor thru a Sew reducer, ratio 15.77 to 1. Openings top, (2) side access doors, center bottom outlet. Serial # 4433.
MFR: American Process Systems
Stock No.:
79478Used American Process TD-24 Mixer - 24 Cu. Ft. Capacity, Fixed Plows
Used- American Process Model TD-24 Cylindrical Plow Mixer, Approximate 24 Cubic Feet Working Capacity, Stainless Steel. Non-jacketed chamber 30" diameter x 84" long, shaft with fixed plows and end scrapers. Driven by a 30 hp, 3/60/460 volt, 1780 rpm motor thru a Sew reducer, ratio 15.77 to 1. Openings top, (2) side access doors, center bottom outlet. Serial # 4431.
MFR: American Process Systems
Stock No.:
10715049IN STOCK and NEW- Paul O Abbe Model RB-265 Ribbon Blender
NEW & IN STOCK- Paul O. Abbe Model RB-265 Ribbon Blender. In -Stock .265 Cubic Foot working capacity. 289 Cubic Foot total volume. Type 304 stainless steel polished. Food grade. All stainless steel construction. Trough dimensions: Approximately 63" wide x 130" long x 67.8" deep. Internal double spiral ribbon. Packing glands and pillow block bearings. 75 hp SEW Euro drive hollow bore design. 230/460 volt, 1775 rpm, 3/60 with approximately output 26 rpm. Top cover with hold down clamps and limit switch. Center Loading cover with welded safety grate, 30" wide x 50" long. Approximate 4.7" wide x 27.6" flush air operated plug valve. Discharge housing is approximate 20.5" wide x 36.2" long. Approximately 4" discharge height. Approximate weight 14,960 pounds. Approximate overall dimensions: 81" wide x 206.5" long x 94.8" high. Controls are available upon request.
MFR: Paul O Abbe
Stock No.:
10755159Used 270 Cu. Ft. Stainless Steel Double Ribbon Blender – 75 HP, Center Discharge
Used- Stainless Steel Double Ribbon Blender. 270 Cubic foot capacity. Non-jacketed trough approximately 144" L x 60" W x 66" D and has a center bottom discharge. Ribbon is chain driven by a Reliance 75 HP 1785 RPM 460-volt 3-phase motor through a gearbox (presently missing). Serial# 70-202.
MFR: Unknown
Stock No.:
53799002Unused 8,000 Liter 304 Stainless Steel Double Ribbon Blender – 75 HP Industrial Batch Mixer
Unused- 304 Stainless Steel Double Ribbon Blender, 8000 Liter Capacity (Approximatley 282 cubic feet). Center bottom outlet. 47.94:1 gearbox reduction ration. 75 HP, 1140 RPM, 3/60/575V motor. On carbon steel frame. Built 2023.
MFR: Unknown
Stock No.:
70852Industrial Stainless Steel Plow Mixer/Dryer – Used Hagen & Rinau HSM 800
Used- Hagen & Rinau Unimix Plow Mixer/Dryer, Type HSM 800. Material of construction is 304 stainless steel (1.4541). 34" (900 mm) diameter x 51" (1300 mm) straight side mixing/drying chamber. Total capacity is 29 cubic feet (822 liter), net working capacity is 8.83-20.3 cubic feet (250-575 liter). Jacketed, inside rated for 45 psi (3 bar) at 212 deg F (100 deg C). 2 end scrapers and 4 Becker plows welded on a shaft. One (1) removable end. (1) 9.75" x 23.4" (250 mm x 600 mm) outlet. Driven via a gearbox by a 195 hp/130 kw, 1280 rpm, 400 volt/50 cycle/3 ph motor. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.
MFR: Hagen & Rinau-Unimix
Stock No.:
50510001Used Scott Turbon 1XEV-1 Mixer & Lee Industries 1-Gallon Reactor – 3 HP, Stainless Steel
Used- Scott Turbon Mixer, Model 1XEV-1, Stainless Steel. Approximate 9-3/4" long mixing shaft. Driven by a 3 hp, 3/60/230/460 volt, 3500 rpm motor. Air operated raise. Includes Lee Industries Reactor, Approximate 1 Gallon (4 Liters), Model 4LDBT. Internal 316L Stainless steel rated 45 psi at -20 to 325 degrees F, vacuum designed. 304 Stainless steel jacket rated 50 psi at -20 to 325 degrees F. Dished top head with 3" tri-clamp openings (missing clamp), (5) 3/4", (5) Bolts missing off top head. Vessel openings side: 1-1/2", 3/4", bottom: 1-1/2" with valve. Reactor Serial # C5087C. Built 1997. Includes control panel with A/B controller. Mounted on stainless steel frame with casters. Serial # 4060-1A.
MFR: Scott Turbon
Types of Used Mixers Available
Aaron Equipment offers a wide selection of used industrial mixers and blenders designed for different materials, viscosities, and processing requirements:
Disperser Mixers – High-speed mixers designed for dispersing powders into liquids and breaking down agglomerates.
Double Arm Mixers – Heavy-duty mixers used for kneading high-viscosity materials such as rubber, adhesives, and doughs.
Double Cone Mixers & V-Blenders – Tumbling blenders ideal for achieving uniform mixing of dry powders and free-flowing solids.
Ribbon Blenders – Horizontal mixers with internal ribbon agitators for efficient blending of powders and light pastes.
Paddle Mixers – Low-shear mixers designed to gently blend fragile, heat-sensitive, or bulk solid materials.
Planetary Mixers – Mixers with rotating blades and bowls for thorough mixing of viscous, dense, or sticky materials.
Mixer Applications & Industry Uses
Used industrial mixers and blenders are widely used in processes where material consistency and uniformity are critical. Common industry applications include:
Food & Beverage: Blending powders, doughs, sauces, spices, and nutritional products
Pharmaceutical & Nutraceutical: Uniform mixing of active ingredients and excipients
Chemical Processing: Production of coatings, resins, adhesives, and specialty chemicals
Plastics & Polymers: Compounding materials prior to extrusion or molding
Cosmetics & Personal Care: Mixing creams, lotions, gels, and emulsions
Cannabis Processing: Blending biomass, oils, and infused products
Used Mixer Buying Considerations
When selecting used industrial mixers and used blenders, it is important to evaluate both process requirements and equipment specifications:
Material Type & Viscosity: Match mixer design to product flow and shear requirements
Batch vs. Continuous Operation: Select equipment based on production volume and workflow
Agitation Style: Ribbon, paddle, planetary, or high-shear depending on mixing goals
Capacity & Throughput: Ensure vessel size and motor power align with production needs
Material of Construction: Stainless steel for sanitary or corrosive environments
Condition & Prior Use: Review maintenance history and previous application
Why Buy Used Industrial Mixers & Blenders
Buying used industrial mixers and used blenders provides a cost-effective solution for expanding or upgrading processing operations. Used equipment reduces capital investment while offering reliable performance from proven designs. Many units are available for immediate shipment, helping minimize downtime and accelerate installation timelines. With a wide range of sizes, configurations, and manufacturers available, used mixers offer flexibility for facilities with evolving production needs.
Sell Your Used Mixers
Aaron Equipment actively purchases surplus and used industrial mixers and blenders. Whether you are upgrading equipment, shutting down a line, or liquidating assets, our team can help maximize the value of your equipment.
Industrial mixers are used to combine, blend, or homogenize materials such as powders, liquids, and slurries. They are essential in industries like food processing, chemicals, pharmaceuticals, and plastics where product consistency is critical.
A mixer typically handles a wider range of materials, including high-viscosity substances, using mechanical agitation. A blender is generally used for dry powders or free-flowing solids where gentle, uniform mixing is required.
Choosing the right mixer depends on material properties, viscosity, batch size, and required mixing intensity. Evaluating agitation type, capacity, and construction material helps ensure compatibility with your process.
Yes. Used industrial mixers are often built for long service life and can remain highly reliable when properly maintained and inspected prior to purchase.
Ribbon blenders, paddle mixers, and V-blenders are commonly used for powders due to their ability to achieve uniform mixing without excessive shear or material degradation..