Used Industrial Mixers & Blenders for Sale
Used industrial mixers and used blenders are processing systems designed to combine, disperse, emulsify, or homogenize materials across a wide range of industries. These machines handle powders, granules, liquids, and high-viscosity materials in both batch and continuous operations. Common applications include food processing, chemicals, pharmaceuticals, plastics, and cosmetics manufacturing. Aaron Equipment offers a large inventory of used industrial mixers and blenders in various configurations to support specific mixing requirements, production capacities, and material characteristics.
Stock No.:
54687110Used Littleford Day Mixing Inc 7 cu ft Nauta mixer. Serial number 1109. Model number 094. Mixer has an overall length of 116", a 54.5" diameter, low pressure dimple jacket rated at 14.9 psi, 304 stai...
Used-Littleford Day Mixing Inc 7 cu ft Nauta mixer. Serial number 1109. Model number 094. Mixer has an overall length of 116", a 54.5" diameter, low pressure dimple jacket rated at 14.9 psi, 304 stainless steel, half lids (one missing), knife valve, and 3 hp drive. Requires 230/460 vac 3 phase electrical supply. Good condition.
MFR: Littleford
Stock No.:
51099003Used Twin Motion 65-Gallon Stainless Steel Vacuum Mixer – Jacketed Kettle
Used- Twin Motion Vacuum Mixer, 65 Gallon, Stainless Steel. Approximate 65 gallon jacketed mixing kettle, 30" diameter x 18" straight side, vacuum cover. Anchor style agitator with sidewall scrappers, driven by 7.5 hp motor. Off set high speed disperser, driven by 10 hp, 3/60/575 volt, 1765 rpm motor. Dual post hydraulic lift with hydraulic pump with vacuum pump driven by 3 hp, 3/60/575 volt, 1760 rpm motor. Floor mounted. No manufactures tag.
MFR: Unknown
Stock No.:
54520001Unused Silverson FMX25 Flashmix High Shear Powder/Liquid Mixer – Stainless Steel In-Line Mixing System
Unused- Silverson FMX25 Flashmix high shear powder/liquid mixer. 304 stainless steel chassis, 316L stainless steel wetted surfaces, 2.5" inlet, 2" outlet, 150 psi maximum pressure, liquid flow rate up to 120 gallons/min, powder feed rate up to 40 lbs/min, and 1.4 cubic foot hopper. Driven by a 7.5 HP motor, 3 phase, 60 Hz, 230/460 V. Suitable for powder induction, high shear mixing, blending, dispersion, emulsification, and homogenization of food, beverage, dairy, cosmetic, pharmaceutical, chemical, and personal care products.
MFR: Silverson
Stock No.:
54183002Used ProcessAll Model 2000H Vacuum Dryer – 2,000 Liter / 528 Gallon / 70 Cu. Ft.
Used ProcessAll Model 2000H Vacuum Dryer, 2,000 Liter Capacity. 528 Gallon, 70 Cubic foot capacity. Driven by approximate 75hp motor. Jacket rated 75 psi at 375 degrees F, national board# 0034. (4) Side entering choppers, driven by approximate 10hp motors. Center bottom outlet. Serial# 55. No vacuum pump.
MFR: Processall
Stock No.:
54565001Used Munson CM-72x20 Rotary Continuous Mixer – 72" Diameter x 20' Long Drum, 10 HP
Used Munson Rotary Continuous Mixer, Model CM-72x20. Driven by a 10HP 3/60/230/460v 1755rpm motor. Heavy-duty rotary drum continuous mixer featuring an approximately 72" diameter x 20' long rotating drum. Designed for continuous blending of powders, granules, flakes, pellets, and other bulk solids. Provides gentle yet highly uniform mixing with low energy consumption and short residence times. Suitable for food products, chemicals, minerals, fertilizers, plastics, pigments, and specialty materials. Built 2021.
MFR: Munson Machinery
Stock No.:
54687185Used Carbon steel double ribbon blender has 50 cu. ft. of working capacity. Unit has a closed top and a 12" w x 17" l end discharge. Driven by a gear-reduced 15 hp, 1160/31 rpm motor that requires 22...
Used-Carbon steel double ribbon blender has 50 cu. ft. of working capacity. Unit has a closed top and a 12" w x 17" l end discharge. Driven by a gear-reduced 15 hp, 1160/31 rpm motor that requires 220/440 vac, 3 ph electricity. Outer ribbon diameter is 36” with a 4” diameter shaft. Mixing chamber is 38.5” w x 90” l x 40” h for a total volume of 72 cu. ft.
Stock No.:
53824001Used Phlauer / A&J Mixing Modular Paddle Mixer – 74 Cu. Ft., 30 HP, 304 Stainless Steel
Used- Phlauer / A&J Mixing Modular Paddle Mixer, Model AJSP 486-6 SPSS. Approximate 74 cubic feet, 304 stainless steel. Non-jacketed trough approximate 48" wide x 78" long x 44" deep. 5" Diameter shaft with (16) 13-3/4" x 6-3/4" x 3/8" thick paddles welded on 2" diameter posts. Driven by a 22kW (30 hp), 3/60/230/460 volt, 1770 rpm gear motor, 75.69 to 1 ratio, final rpm 23. Openings top: 12", 2-3/4", side: (4) 30" x 15-1/2" hinged inspection doors. 14" x 8" End bottom discharge with pneumatic discharge valve. Includes outboard roller bearings, air seals, and a control panel. Mounted on (4) stainless steel legs. Serial# 99111.
MFR: Phlauer
Stock No.:
54699001Used Littleford Plow Mixer, Model KM-3000-D, 304 Stainless Steel, Approximate 74 Cubic Feet Working Capacity. Approximate 44" diameter x 116" long chamber. Drum rated Atmospheric, 304 stainless steel...
Used-Littleford Plow Mixer, Model KM-3000-D, 304 Stainless Steel, Approximate 74 Cubic Feet Working Capacity. Approximate 44" diameter x 116" long chamber. Drum rated Atmospheric, 304 stainless steel jacket rated 75 psi at 32 to 320 degrees F. Approximate 5" diameter shaft with (12) welded on paddles. Driven by a 100 Hp 3/60/460/1780 rpm motor thru Falk gearbox, 13.86 to 1 ratio. Provision for (10) Tulip style choppers each should be driven by a 15 HP motor (5) additional provision. (NOTE: Chopper Motors not included). Top openings: 1-1/2", 3", 10", 16". (2) 24" x 16" side access doors. 16" Side bottom outlet. Serial# 41961-4442, Built 1993.
MFR: Littleford
Stock No.:
10151561Used J.H. Day Stainless Steel Jacketed Mixtruder | 75 Gallon Working Capacity | 30+25 HP Hydraulics
Used J.H. Day Stainless Steel Jacketed Mixtruder | 75 Gallon Working Capacity | 30+25 HP Hydraulics. With dispersion blades and extruder screw discharge. Internal pressure: Atmospheric @ 353F shell is 7/16" thick. Jacket pressure: 125 psi @ 353F jacket is 3/8" thick. Mixer Dimensions: 32" x 32" x 25" high, approximate total capacity is 110 gallons. Extruder screw is 8" diameter driven by a hydraulic motor, and hydraulic tilt discharge are both powered by 30 HP 230/460 volts Vickers Hydraulic pumping system. Mixer Blades driven by a 25 hp US. varidrive motor, 220/440 volt. 31 to 125 RPM to chain and sprocket to give you approximately 15 to 62.5 RPM output speed on the blades. NB #1117, SN 86065. Built 1971.
MFR: J H Day
Stock No.:
53189002Used Eirich RV-15 Mixer – 750L, 1200 kg Capacity, 75 HP Tool, 304 Stainless, Industrial Intensive Mixer
Used- Eirich Mixer, Model RV-15. 304 stainless steel product contact surfaces. Approximately 750 liter bowl. 1200 kg max capacity. 75 hp mixing tool. 10 hp pan motor. On board lubrication system with 2 hp pump. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.
MFR: Eirich
Stock No.:
54547001Used Rietz RS-28-K5408 Dual Shaft Double Ribbon Blender – 60 Cu. Ft. Working Capacity – 304 Stainless Steel
Used- Rietz Manufacturing Co. Dual Shaft Double Ribbon Blender, Model RS-28-K5408. Approximate 60 cu. ft. working capacity, 75 cu. ft. total capacity, and can process approximately 4,000 to 5,000 pounds per batch, depending on product bulk density. Engineered for high-capacity, heavy-duty batch mixing in demanding industrial processing environments. Constructed with 304 stainless steel product contact surfaces, this blender is designed to provide rapid, efficient, and highly uniform mixing of dry powders, granules, bulk solids, and products requiring liquid addition. (2) 28" counter-rotating dual ribbon agitators that utilize a counter-flow ribbon design to move material both axially and radially, producing fast, thorough, and homogeneous blending while minimizing product degradation. The heavy-duty dual shaft design, utilizing chain or gear-driven independently driven ribbon assemblies, provides reliable performance and excellent product turnover for consistent batch-to-batch results. Designed to handle both dry materials and products requiring liquid addition, the mixer is equally well suited for blending powders, granules, slurries, and other process materials. Product discharge is accomplished through dual air-operated (pneumatic) bottom end discharge doors, allowing rapid, controlled, and virtually complete batch evacuation while minimizing residual product. The unit is mounted on a heavy-duty four-leg stainless steel frame and is equipped with safety grates, protective guarding, and hinged covers to enhance operator safety and simplify loading and inspection. Its sanitary stainless steel construction makes it well suited for food, pharmaceutical, nutraceutical, chemical, agricultural, mineral, plastics, and other industrial processing applications requiring durability, corrosion resistance, and ease of cleaning. The mixing chamber measures approximately 72" long 56" wide 36" deep and operates at an output speed of approximately 30-35 RPM.
MFR: Rietz
Stock No.:
47147030Used Buhler DFMF-2-P-RF Stainless Steel Plow Mixer with HMI Controls – 12.8 Cu. Ft. Capacity
Used- Buhler Model DFMF-2-P-RF Stainless Steel Plow Mixer. Designed for efficient blending and mixing applications. The unit has an approximate full capacity of 12.8 cubic feet and a working capacity of approximately 8.5 cubic feet. Constructed of stainless steel, the mixer is non-jacketed and features a hinged cover equipped with grid safety bars for operator protection. Mixer includes an infeed opening measuring 38" long by 5.5" wide and a discharge gate measuring 41" long by 5.25" wide. The discharge height is approximately 48", the infeed height is approximately 80". The unit is powered by a 3.6 kW (4.9 HP), 480-volt, 3-phase, 60 Hz motor, and is supplied with a control panel featuring an HMI for user-friendly operation and process monitoring. Serial # 10335419, Built 2003. The mixer occupies an approximate footprint of 5' by 10', making it suitable for a variety of production environments requiring reliable and consistent mixing performance.
MFR: Buhler Inc.
Types of Used Mixers Available
Aaron Equipment offers a wide selection of used industrial mixers and blenders designed for different materials, viscosities, and processing requirements:
Disperser Mixers – High-speed mixers designed for dispersing powders into liquids and breaking down agglomerates.
Double Arm Mixers – Heavy-duty mixers used for kneading high-viscosity materials such as rubber, adhesives, and doughs.
Double Cone Mixers & V-Blenders – Tumbling blenders ideal for achieving uniform mixing of dry powders and free-flowing solids.
Ribbon Blenders – Horizontal mixers with internal ribbon agitators for efficient blending of powders and light pastes.
Paddle Mixers – Low-shear mixers designed to gently blend fragile, heat-sensitive, or bulk solid materials.
Planetary Mixers – Mixers with rotating blades and bowls for thorough mixing of viscous, dense, or sticky materials.
Mixer Applications & Industry Uses
Used industrial mixers and blenders are widely used in processes where material consistency and uniformity are critical. Common industry applications include:
Food & Beverage: Blending powders, doughs, sauces, spices, and nutritional products
Pharmaceutical & Nutraceutical: Uniform mixing of active ingredients and excipients
Chemical Processing: Production of coatings, resins, adhesives, and specialty chemicals
Plastics & Polymers: Compounding materials prior to extrusion or molding
Cosmetics & Personal Care: Mixing creams, lotions, gels, and emulsions
Cannabis Processing: Blending biomass, oils, and infused products
Used Mixer Buying Considerations
When selecting used industrial mixers and used blenders, it is important to evaluate both process requirements and equipment specifications:
Material Type & Viscosity: Match mixer design to product flow and shear requirements
Batch vs. Continuous Operation: Select equipment based on production volume and workflow
Agitation Style: Ribbon, paddle, planetary, or high-shear depending on mixing goals
Capacity & Throughput: Ensure vessel size and motor power align with production needs
Material of Construction: Stainless steel for sanitary or corrosive environments
Condition & Prior Use: Review maintenance history and previous application
Why Buy Used Industrial Mixers & Blenders
Buying used industrial mixers and used blenders provides a cost-effective solution for expanding or upgrading processing operations. Used equipment reduces capital investment while offering reliable performance from proven designs. Many units are available for immediate shipment, helping minimize downtime and accelerate installation timelines. With a wide range of sizes, configurations, and manufacturers available, used mixers offer flexibility for facilities with evolving production needs.
Sell Your Used Mixers
Aaron Equipment actively purchases surplus and used industrial mixers and blenders. Whether you are upgrading equipment, shutting down a line, or liquidating assets, our team can help maximize the value of your equipment.
Industrial mixers are used to combine, blend, or homogenize materials such as powders, liquids, and slurries. They are essential in industries like food processing, chemicals, pharmaceuticals, and plastics where product consistency is critical.
A mixer typically handles a wider range of materials, including high-viscosity substances, using mechanical agitation. A blender is generally used for dry powders or free-flowing solids where gentle, uniform mixing is required.
Choosing the right mixer depends on material properties, viscosity, batch size, and required mixing intensity. Evaluating agitation type, capacity, and construction material helps ensure compatibility with your process.
Yes. Used industrial mixers are often built for long service life and can remain highly reliable when properly maintained and inspected prior to purchase.
Ribbon blenders, paddle mixers, and V-blenders are commonly used for powders due to their ability to achieve uniform mixing without excessive shear or material degradation..