Used Plastics Equipment for Sale
Used plastics equipment includes a wide range of processing systems designed for manufacturing, compounding, forming, and recycling plastic materials. These machines support critical operations such as extrusion, injection molding, pelletizing, size reduction, and film production. Commonly used across plastics manufacturing, packaging, automotive, and recycling industries, plastics equipment enables efficient material processing and consistent product quality. Aaron Equipment offers a large inventory of used plastics equipment in various configurations to meet production requirements, material types, and throughput demands.
Stock No.:
53793001Used Holzma Model HPP11/38 Downstream Saw, Cutting lengths 1300 mm (as crosscut saw) up to 5600 mm
Used- Holzma Model HPP11/38 Saw. Successful model/ frequently produced beam saw with 125 mm saw blade projection and in the version HPP with front loading. Cutting lengths 1300 mm (as crosscut saw) up to 5600 mm. Saw carriage feed 0 .120 m/min, rack and pinion drive.
Stock No.:
10131016Papenmeier GmbH High Intensity Mixer, Model KUM 2000
Used- Papenmeier GmbH High Intensity Mixer, Model KUM 2000. Stainless steel Interior. Approximate working capacity 47.07 ft (1333 Liter). Total Capacity 70.6 cu. ft (2000 Liter). Hydraulic operated 8" (200 mm) bottom outlet. Hinged top cover, hydraulic operated. Driven by a approx. 30 HP-400volt/50cycle/3-phase motor. Last used in a Pigment application. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.
MFR: Papenmeier
Stock No.:
53865001Used Mixaco High-Intensity Mixer – Model M 400-CD, Stainless Steel
Used- Mixaco High Intensity Mixer, Model M 400-CD, Stainless Steel. Max working capacity 165-240 liters (5.83-8.48 cubic feet), total capacity 400 liters (14.13 cubic feet). Max mixing speed 15 RPM by a 64.5 HP/43 KW-400Volt-50Cycle-3Ph motor. Incl. (1) Side chopper. 11.7" (300 mm) hydraulic operated product outlet. Incl. Siemens control. Frame mounted. Weight 1.6 tonnes. New 2017. Previously used in a compounding application. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible
MFR: Mixaco
Stock No.:
53141001MTI M600 High Intensive Mixer System for Sale – 570L Capacity
Used- MTI Mixing system consisting of: (1) MTI - MISCHTECHNIK INDUSTRIEANLAGEN GMBH High Intensive Mixer, type M600. 1.4541/AISI 321; ground in grain size 180 Stainless steel on product contact parts. Total capacity 680 liters (24 ct. ft.), working capacity 570 liters (20.12 cu. ft.). 3-part high-efficiency mixing tools. Mixing speed 370 RPM by 75 Kw (100.5hp) 3/50/400v V-belt driven motor. (1) Double door control panel, (1) Siemens Simatic operating panel. Mounted on a platform 6000 mm x 11000 mm x 3050 mm high. Includes legs, stairway, and additional infrastructure. Serial# 1496. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.
MFR: MTI-Mischtechnik
Stock No.:
53890002Used Maguire Ultra 300 Vacuum Resin Dryer – 230 Lb/Hr, 350°F, 15 kW Heater
Used- Maguire Dryer, Model Ultra-300. 230 lbs/hour throughput. 4.25 cubic foot heating hopper volume. 2 cubic foot vacuum chamber volume. 2.25 cubic foot retention hopper volume. 350 degrees F maximum temperature. 15kW process heater. 3.5 HP blower. 3/60/575V. Built 2022. Stand not included.
MFR: Maguire
Stock No.:
54492002Industrial Thermal Fluid Heating System | Unused Mokon 96 kW Hot Oil Controller
Industrial Thermal Fluid Heating System | Unused Mokon 96 kW Hot Oil Controller. (1) Zone, 96 kW. 5 HP motor. Maximum fluid temperature 600 degrees F. Contains 58 gallon reservoir tank. 0.5 HP Supply pump. 3/60/460V, built 2020.
MFR: Mokon
Stock No.:
49422033Used Nissei NEX110III-9EG 120-Ton All-Electric Injection Molding Machine – 2 Oz Shot with Robot Interface
Used- Nissei Injection Molding Machine, Model NEX110III-9EG. This all-electric press is rated at 120 Ton clamp force with a 2 oz shot size. Tie bar spacing measures 16.5" x 16.5", platen size is 23.9" x 23.9", and maximum daylight is 29.9". The machine runs a Tact control and is equipped with air blow and a robot interface. Built 2014.
MFR: Nissei
Stock No.:
49422034Used Nissei NEX110III-9EG 120-Ton All-Electric Injection Molding Machine – 1.5 Oz Shot
Used- Nissei Injection Molding Machine, Model NEX110III-9EG. This all-electric press is rated at 120 Ton clamping capacity with a 1.5 oz shot size, making it suited to small and medium precision work. Tie bar spacing is 16.5" x 16.5" with platens measuring 23.9" x 23.9", a maximum daylight of 29.9" and a clamp stroke of 13.8". The machine runs on a Tact IV control and is equipped with air blow. Built 2014.
MFR: Nissei
Stock No.:
49422035Used Nissei FNX180IIIA-36A 198-Ton All-Electric Injection Molding Machine – 14.9 Oz Shot
Used- Nissei Injection Molding Machine, Model FNX180IIIA-36A. This all-electric press is rated at 198 tons of clamp force with a 14.9 oz shot size, 22" x 22" tie bar spacing, and 31.5" x 31.5" platens. Maximum daylight is 37.4", with a 27.6" clamp stroke and 4.3" ejector stroke, running under a Tact IV control. Equipped with Super Clean, dual air blow, SPI robot interface, and a hardened screw and barrel. Built 2016.
MFR: Nissei
Stock No.:
54590001Used 1996 Nissei DC200-25ASE 220-Ton Two-Shot Injection Molding Machine with Yushin Servo Robot
Used- 1996 Nissei DC200-25ASE 220-ton Horizontal Hydraulic Two-Shot Injection Molding Machine. Factory hydraulic rotary platen for two-color, multi-material, overmolding, and insert molding applications. It features dual 25A injection units with 45 mm screws, 6.79 oz shot capacity per barrel, 25,260 psi maximum injection pressure, an N9G / NC9000G controller, and operates on 230/460V, 3 Phase, 60 Hz power. Included are a 2008 Yushin ATB-150S servo top-entry robot with controller, teach pendant, mounted robot, and safety guarding, providing a complete automated molding cell. Suitable for producing two-color, multi-material, overmolded, and insert-molded plastic components. Last used to make Custom coasters (2 separate colors molded into the same part).
MFR: Nissei
Stock No.:
10151635Used Gala 6D MUP Underwater Pelletizer System – Complete Polymer Pelletizing Package
Used- Gala Underwater Pelletizer, Model GALA 6D MUP. Pelletizer system includes the following: #6D MUP cutter head, driven by a 5 hp motor; Operator control panel with cutter head drive; Spin dryer model 8.2; Water-tempering system with 80 gpm capacity; Serial #890502.
MFR: Gala
Stock No.:
53309001High-Capacity Prealpina Single Screw Extruder – 1100 lbs/hr Production Rate
Used- Prealpina 130 mm Diameter Single Screw Extruder, with a capacity of 1100 LBS/500 Kgs./hr. Electrically heated, air cooled. incl. die head and control panel. Reported to have new screw and barrel. Previous used on PE, PP and PET. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.
MFR: Prealpina
Types of Used Plastics Equipment Available
Aaron Equipment offers a wide selection of used plastics equipment designed to support extrusion, molding, compounding, pelletizing, and recycling processes across a variety of polymer materials and production requirements:
Single Screw Extruders – Widely used extrusion systems for processing thermoplastics into film, sheet, pipe, and profile products.
Twin Screw Co-Rotate Extruders – High-performance compounding extruders designed for precise mixing, blending, and material modification.
Injection Molders – Horizontal – Standard molding machines used for high-volume production of plastic parts with consistent precision.
Pelletizing Machinery – Strand Pelletizers – Systems used to cut extruded plastic strands into uniform pellets for downstream processing or sale.
Size Reduction – Grinders and Granulators – Equipment designed to reduce scrap plastic into reusable material for recycling and reprocessing.
Blown Film Lines – Complete systems for producing plastic films used in packaging, bags, and flexible materials.
Plastics Equipment Applications & Industry Uses
Used plastics equipment supports a wide range of manufacturing and recycling operations where plastic materials must be formed, processed, or reconditioned. Common applications include:
Packaging Manufacturing: Production of films, bags, containers, and flexible packaging materials
Automotive & Industrial: Molding and extrusion of durable plastic components and parts
Recycling Operations: Size reduction, washing, and pelletizing of post-industrial and post-consumer plasticsConstruction Materials: Production of pipe, profiles, insulation, and structural components
Consumer Goods: High-volume manufacturing of plastic products and housings
These systems play a critical role in maintaining material consistency, throughput efficiency, and product quality across plastics processing operations.
Used Plastics Equipment Buying Considerations
When selecting used plastics equipment, it is important to evaluate both process requirements and equipment condition:
Material Compatibility: Ensure equipment supports specific polymers such as PE, PP, PVC, PET, or engineered resins
Process Type: Determine whether extrusion, molding, pelletizing, or recycling systems are required
Throughput & Output Capacity: Match machine performance with production targets
Screw & Barrel Design: Critical for mixing efficiency, melt quality, and product consistency
Control Systems & Automation: Evaluate PLC systems, controls, and integration capabilities
Condition & Maintenance History: Review wear components, rebuild status, and prior application.
Why Buy Used Plastics Equipment
Buying used plastics equipment provides a cost-effective solution for expanding production capacity or upgrading existing processing lines. Used systems reduce capital investment while offering proven, industrial-grade performance. Many machines are available for immediate shipment, helping facilities avoid long lead times and maintain production schedules.
With access to a wide range of equipment types and manufacturers, Aaron Equipment helps processors find reliable plastics machinery tailored to their specific operational needs.
Sell Your Used Plastics Equipment
Aaron Equipment actively purchases surplus plastics equipment, including extrusion systems, injection molding machines, and recycling lines. Whether you are upgrading equipment or liquidating assets, our team can help maximize equipment value.
Plastics equipment is used to process, form, and recycle plastic materials through operations such as extrusion, injection molding, pelletizing, and size reduction. These systems are essential in manufacturing and recycling environments.
Common types include extruders, injection molding machines, pelletizers, shredders, grinders, and film production lines. Each type supports a specific stage of plastics processing or recycling.
Choosing the right equipment depends on material type, production volume, and process requirements. Evaluating machine configuration, throughput, and compatibility with existing systems is critical.
Yes. Many plastics machines are built for long service life and can remain highly reliable when properly maintained, inspected, or refurbished prior to purchase.
Plastic recycling systems typically include shredders, grinders, wash lines, and pelletizers that convert scrap plastic into reusable raw material for reprocessing.