Used Plastics Equipment for Sale
Used plastics equipment includes a wide range of processing systems designed for manufacturing, compounding, forming, and recycling plastic materials. These machines support critical operations such as extrusion, injection molding, pelletizing, size reduction, and film production. Commonly used across plastics manufacturing, packaging, automotive, and recycling industries, plastics equipment enables efficient material processing and consistent product quality. Aaron Equipment offers a large inventory of used plastics equipment in various configurations to meet production requirements, material types, and throughput demands.
Stock No.:
54687106Used Two-stage spray washer. The conveyor spray washer consists of a 73" wide x 99" long interlocking plastic conveyor belt inlet, (2) 8" diameter x 73" long brush rollers for cleaning the bottom, a ...
Used-Two-stage spray washer. The conveyor spray washer consists of a 73" wide x 99" long interlocking plastic conveyor belt inlet, (2) 8" diameter x 73" long brush rollers for cleaning the bottom, a 24" long washing station that uses water and a large brush roller for cleaning the top, a 12" long drying section that uses an air knife, a 73.75" wide 54" long interlocking plastic conveyor belt outlet, and a stainless steel tub that is used for the collection of waste water. The washer has a 73" wide x 2.25" tall work opening and a 36" working height. Overall dimensions are 110" wide x 200" long x 70" tall. This conveyor washer unit was last used for washing stone table top counters.
Stock No.:
54687149Used Intertek ARID-Dry MS-2400/2000 desiccant dehumidifier. Model # CDH-R-126. Serial # IB826-01. The dehumidifier has a 26" silica gel desiccant wheel. The supply inlet and outlet are 17.5" in diame...
Used-Intertek ARID-Dry MS-2400/2000 desiccant dehumidifier. Model # CDH-R-126. Serial # IB826-01. The dehumidifier has a 26" silica gel desiccant wheel. The supply inlet and outlet are 17.5" in diameter. The reactivation inlet and outlet are 10" in diameter. The reactivation inlet has a 11.5" collar, but the other inlets and outlets are missing their collars. The main outlet is ". The maximum volume is 2400 scfm. This unit has fork slots. The dehumidifier has 74773.7 hours on it. Overall dimensions 32" wide by 71" long by 51" tall.
Stock No.:
52095005Used Mixaco CM 1000D High Intensity Container Mixer – 1000L, 60 HP Motor
Used- Mixaco Model CM 1000D High Intensity Container Mixer. Stainless steel on product contact parts. Total capacity 28.25 Cu FT (1000 Liter), Working capacity 21.18 (800 Liter). Rotating mixing chamber with side scrapers. Driven via a Flender gearbox by a 52.5 HP (35 kW), 3/50/400-volt motor. Includes (1) Canisters and stainless steel control panel. Built 2001. Previously used in a powder coating application. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible
MFR: Mixaco
Stock No.:
52095003Used Mixaco High-Intensity Model CM 600D Container Mixer – Industrial Equipment – Chemical Grade, 40 HP
Used- Mixaco Model CM 600D High Intensity Container Mixer. Stainless steel on product contact parts. Working Capacity 12.71 Cu FT (360 Liter), Total Capacity 21.18 (600 Liter). Rotating mixing chamber with side scrapers. Driven by an approximate 40 hp (26.66 kW), 3/50/380 volt motor. Includes (1) canisters and control panel (mounted on mixer). built 1992. Previous used in a chemical application. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible
MFR: Mixaco
Stock No.:
53459038Used Zeppelin CMB 300 High-Intensity Mixing System – 300-Liter Stainless Steel Mixer with 3 Interchangeable Bowls
Used- Zeppelin high intensive mixing system, type CMB 300. Stainless steel. Total capacity 300 liter (10.59 cu ft) working capacity 200 liter (7.06 cu. ft). Incl. Siemens SIMATIC HMI control panel & 3 stainless steel interchangeable bowls on wheels. Serial number # 900000545, New 2020. Our Freight Specialists can assist with freight and customs documentation to ensure a smooth transition.
Stock No.:
53145001Used 650 Ton DS Machinery Dima Injection Molding Machine for Sale
Used- DS Machinery Dima Injection Mold Machine, Model DMT 650. 650 ton capacity. 92 oz shot size. Opening stroke maximum 33", Mould height minimum 16.5" (420mm), Mould height maximum 35" (890mm), Daylight maximum 70", Distance between tie-bars 35.43" (840mm) x 35.43" (840mm), Platen size 52" (1320mm) x 52" (1320mm), Ejector force maximum 17.2 Ton. 55,562 hours. Serial# A60493.
Stock No.:
10755175Used Ensign Model 39-3000 Box Dumper – 2500 lb Capacity, 138” Dump Height, 48” Bucket, Hydraulic Pump
Used- Ensign Equipment Model 39-3000 Lift and Dump Gaylord Box Dumper. 48" wide bucket. 2,500 lbs. lift capacity. 138" dump height. Includes remote 2 HP hydraulic pump with hoses and controls. 460/3/60 operation. 153" overall installed height. Serial# 9871.
MFR: Ensign Equipment
Stock No.:
53759004Used Farrel Continuous Compounding Line – FCM-UM Mixer, Hot Melt Extruder, Gala Underwater Pelletizer
Used- Farrel Continuous Compounding Line, consisting of: Farrel Model 6 FCM-UM Continuous Mixer, Serial#65A2189-2. Driven by a 600hp Westinghouse Motor. Farrel 10" Hot Melt Extruder. Screen changer. Gala Underwater Pelletizer System. Gala Spin Dryer with Dewater System. Acrison Feed system w/ 6 additive feeders. Heat control panel w/ PLC installed.
MFR: Farrell
Stock No.:
51164004Pre-Owned Henschel FM200A Industrial Mixer – Masterbatch Application
Used- Henschel High Intensity Mixer, Model FM200A Carbon steel jacketed bowl with 304 stainless steel Interior. Approximate working capacity 4.7 cu ft (133 Liter). Total Capacity 7.06 cu. ft (200 Liter). Jacketed bowl. Hydraulic operated 8" (200 mm) bottom outlet. Hinged top cover, hydraulic operated. Driven by a approx. 16 HP-380volt/50cycle/3-phase motor. Incl. control panel with Siemens PLC. Last used in a Masterbatch application. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.
MFR: Henschel
Stock No.:
54127001Henschel / Zeppelin PVC Mixing Plant – 4000 T/Year, High-Intensity FM350 Mixers, Dust Collection & Controls (Used)
Henschel / Zeppelin PVC Mixing Plant 4000 T/Year, High-Intensity FM350 Mixers, Dust Collection & Controls (Used), consisting of: (4) Henschel/Zeppelin High Intensity Mixer, Model FM350 Carbon steel jacketed bowl with stainless steel Interior. Approximate working capacity 8.22 cu ft (233 Liter). Total Capacity 12.3 cu. ft (350 Liter). Jacketed bowl. Hydraulic operated 8" (200 mm) bottom outlet. Hinged top cover, hydraulic operated. Driven by an approx. 20HP-380volt/50cycle/3-phase motor. (4) Cyclones with valves on legs, (4) Donaldson dust collectors, Model Torit DCE. On legs. (4) Air blowers. Incl. control system, feeding system, conveying system, piping, valves, sensors, and additional infrastructure. Previously used in a PVC dry blend application (for piping). Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.
MFR: Henschel
Stock No.:
54687187Used 40 kw Heat Inc hot oil heater, Model SL650-WC-483 with dual 20 kw electric heaters each with 137 sq ft oil coolers and (2) 5 hp, Model1.5x3x10 Dean circulation pumps, nominally rated 25 gpm, 440...
Used-40 kw Heat Inc hot oil heater, Model SL650-WC-483 with dual 20 kw electric heaters each with 137 sq ft oil coolers and (2) 5 hp, Model1.5x3x10 Dean circulation pumps, nominally rated 25 gpm, 440 volt with controls, Serial # SL6074-2, built 1995.
MFR: Heat Inc
Types of Used Plastics Equipment Available
Aaron Equipment offers a wide selection of used plastics equipment designed to support extrusion, molding, compounding, pelletizing, and recycling processes across a variety of polymer materials and production requirements:
Single Screw Extruders – Widely used extrusion systems for processing thermoplastics into film, sheet, pipe, and profile products.
Twin Screw Co-Rotate Extruders – High-performance compounding extruders designed for precise mixing, blending, and material modification.
Injection Molders – Horizontal – Standard molding machines used for high-volume production of plastic parts with consistent precision.
Pelletizing Machinery – Strand Pelletizers – Systems used to cut extruded plastic strands into uniform pellets for downstream processing or sale.
Size Reduction – Grinders and Granulators – Equipment designed to reduce scrap plastic into reusable material for recycling and reprocessing.
Blown Film Lines – Complete systems for producing plastic films used in packaging, bags, and flexible materials.
Plastics Equipment Applications & Industry Uses
Used plastics equipment supports a wide range of manufacturing and recycling operations where plastic materials must be formed, processed, or reconditioned. Common applications include:
Packaging Manufacturing: Production of films, bags, containers, and flexible packaging materials
Automotive & Industrial: Molding and extrusion of durable plastic components and parts
Recycling Operations: Size reduction, washing, and pelletizing of post-industrial and post-consumer plasticsConstruction Materials: Production of pipe, profiles, insulation, and structural components
Consumer Goods: High-volume manufacturing of plastic products and housings
These systems play a critical role in maintaining material consistency, throughput efficiency, and product quality across plastics processing operations.
Used Plastics Equipment Buying Considerations
When selecting used plastics equipment, it is important to evaluate both process requirements and equipment condition:
Material Compatibility: Ensure equipment supports specific polymers such as PE, PP, PVC, PET, or engineered resins
Process Type: Determine whether extrusion, molding, pelletizing, or recycling systems are required
Throughput & Output Capacity: Match machine performance with production targets
Screw & Barrel Design: Critical for mixing efficiency, melt quality, and product consistency
Control Systems & Automation: Evaluate PLC systems, controls, and integration capabilities
Condition & Maintenance History: Review wear components, rebuild status, and prior application.
Why Buy Used Plastics Equipment
Buying used plastics equipment provides a cost-effective solution for expanding production capacity or upgrading existing processing lines. Used systems reduce capital investment while offering proven, industrial-grade performance. Many machines are available for immediate shipment, helping facilities avoid long lead times and maintain production schedules.
With access to a wide range of equipment types and manufacturers, Aaron Equipment helps processors find reliable plastics machinery tailored to their specific operational needs.
Sell Your Used Plastics Equipment
Aaron Equipment actively purchases surplus plastics equipment, including extrusion systems, injection molding machines, and recycling lines. Whether you are upgrading equipment or liquidating assets, our team can help maximize equipment value.
Plastics equipment is used to process, form, and recycle plastic materials through operations such as extrusion, injection molding, pelletizing, and size reduction. These systems are essential in manufacturing and recycling environments.
Common types include extruders, injection molding machines, pelletizers, shredders, grinders, and film production lines. Each type supports a specific stage of plastics processing or recycling.
Choosing the right equipment depends on material type, production volume, and process requirements. Evaluating machine configuration, throughput, and compatibility with existing systems is critical.
Yes. Many plastics machines are built for long service life and can remain highly reliable when properly maintained, inspected, or refurbished prior to purchase.
Plastic recycling systems typically include shredders, grinders, wash lines, and pelletizers that convert scrap plastic into reusable raw material for reprocessing.