Used Plastics Equipment for Sale
Used plastics equipment includes a wide range of processing systems designed for manufacturing, compounding, forming, and recycling plastic materials. These machines support critical operations such as extrusion, injection molding, pelletizing, size reduction, and film production. Commonly used across plastics manufacturing, packaging, automotive, and recycling industries, plastics equipment enables efficient material processing and consistent product quality. Aaron Equipment offers a large inventory of used plastics equipment in various configurations to meet production requirements, material types, and throughput demands.
Stock No.:
54129001PET Sheet Extrusion Line – 48” Wide, 2,000 lbs/hr, OMV D140 Extruder, (Used)
Used- PET Sheet Extrusion Line Capable up to 48" Wide, currently has 32"W Allied Flex-Lip Extrusion Die. 2,000 lbs/hr, OMV D140 Extruder (Used) 350 HP main motor; 30 HP drive system; Rated up to 2,000 lbs/hour (dependent on material and configuration); Multi-zone cooling rolls; Chrome-polished roll stack. OMV Single Screw Extruder, Model D140 6P. 6" diameter. SN 01087; 3/60/480V. Built 2001. With Operating panel, Conveyor, Draw rolls, Temperature control system, Chiller, Vacuum loader, and Winder/accumulator.
Stock No.:
54129006Used Maag CSC-149 Continuous Double-Piston Screen Changer | 3,000 lb/hr | 100 Mesh | 350°C | Built 2018
Used Maag CSC-149 Continuous Double-Piston Screen Changer | 3,000 lb/hr | 100 Mesh | 350F | Built 2018, double-piston continuous screen changer). Rated up to 3,000 lb/hr (1,360 kg/hr). 100 mesh screen. Up to 350 degrees C application temperature. Serial# VA18067/50163718.
MFR: Maag
Stock No.:
54136001Used B&P Littleford Model 60/6 Gimbal Drive Unit – For Ko-Kneader Anode Paste Mixing
Used- B&P Littleford Model 60/6 Gimbal Drive Unit used for a B&P Ko-Kneader for Anode Paste Mixing. Serial# CK2019/958. Includes Full Lube unit, driven by a 15hp 1800rpm motor. Includes additional Boxes of parts. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.
MFR: Littleford
Stock No.:
54352011BloApCo 5-Shaft Cardboard Shredder with Infeed & Discharge Conveyors
Used BloApCo 5-shaft industrial cardboard shredder equipped with a 30 HP motor, infeed conveyor, and discharge conveyor. Multi-shaft configuration is designed for continuous size reduction of corrugated cardboard and packaging materials, with conveyorized feeding and discharge for integration into recycling or material-handling operations. Possible applications and suitable products include shredding corrugated cardboard, boxes, packaging waste, and other compatible fiber-based materials for recycling, waste reduction, or packaging reuse.
MFR: Bloappco
Stock No.:
54399006Used Krupp Werner & Pfleiderer KP-120/250 KombiPlast Compounder with ZS-B 120 Side Feeder
Used- Krupp Werner & Pfleiderer GmbH KP-120/250 KombiPlast Compounder. 6:1 L/D. (1) 250 mm diameter screw x 1500 mm long. screw speed: 4,74-47,5 rpm. Electrically heated. Driven by a 88 kw (132 hp) DC drive motor via a gear box. (1) Die head, Frame mounted. (1) Krupp Werner & Pfleiderer GmbH ZS-B 120 Side Feeder, screw speed: 36.5-365 rpm. Frame mounted. Complete with control panel and additional infrastructure. Weight 22 tonnes. New 2004. Our Freight Specialists can assist with any customs documents and forms to insure a smooth transition.
MFR: Werner & Pfleiderer
Stock No.:
54418001Used 496 Ton Woojin TH500S Injection Molding Machine with Keba Controls & Core Pull – High-Performance Production System
Used 500 Ton Woojin TH500S Injection Molding Machine with Keba Controls & Core Pull High-Performance Production System. 52.28 oz shot size, 49.6" x 49.6" platen size. 34.25" x 32.28" tie bar spacing. 13.77" min. mold height. 31.49" max. mold height. 60.23" daylight. 7.87" ejector stroke. 7.87" ejector force. 28.74" clamp stroke. 80mm screw diameter. 460V. Has core pull. Keba controls. Built 2019.
Stock No.:
54418002Used Woojin TH500S 496 Ton Injection Molding Machine (2017) with Keba Controls & Core Pull for Heavy-Duty Production
Used Woojin TH500S 496 Ton Injection Molding Machine (2017) with Keba Controls & Core Pull for Heavy-Duty Production. 52.28 oz shot size, 49.6" x 49.6" platen size. 34.25" x 32.28" tie bar spacing. 13.77" min. mold height. 31.49" max. mold height. 60.23" daylight. 7.87" ejector stroke. 7.87" ejector force. 28.74" clamp stroke. 80mm screw diameter. 460V. Has core pull. Keba controls. Built 2017.
Stock No.:
54429003Used Dri-Eaz F203-A DrizAir 1200 Portable Dehumidifier 115V
Used Dri-Eaz DrizAir 1200 Dehumidifier, Model F203-A. Removes up to 18 gallons of water per day (max conditions). Built-in centrifugal pump with auto purge, 25' power cord. Serial # 128859. 1/60/115V. Approximate OAD's, 3' x 3' x 3'.
Stock No.:
54436001Used PTI Trident 6500 Sheet Extrusion Line – 6.5" 500 HP High-Output Plastic Sheet Production System
Used- PTI Trident Sheet Extrusion Line, Model 6500. 6.5" screw diameter. 36:1 L/D. 500 HP, 1800 RPM main drive. With Flender gearbox; PTI model H6018 sheet takeoff system; Revolution Roll stand; EDI 54" W dies; Sandvik 60" stainless steel belt, water cooled dual zone cooling system; pull rolls; trim saws (capable of max. thickness of 1.25"); Vulcan automatic sheet-stacker (capable of .25-.75 thickness, up to 120" length); dust collector; granulation equipment. Titan PLC control system. 3/60/460V. Built 2006.
MFR: PTI
Stock No.:
54687032Used NRM Pacemaker III 4.5" Vented Single-Screw Extruder With 34:1 L/D And 200 HP DC Drive
Used NRM Pacemaker III 4.5" single-screw extruder with 34:1 L/D ratio. Unit features a 12' long vented barrel with electric heating and water cooling, along with an 8" round feed throat. Screw is driven by a 200 hp, 500 VDC electric motor. Barrel includes a 5.5" side vent located approximately 6.5' from the feed throat. SCR motor controls are included; control panel is missing the temperature controllers. Approximate overall dimensions are 16' long x 4' wide x 5' high. Serial #18031. Built 1982. Unit is stored indoors at our warehouse. Possible applications include extrusion and continuous melt processing of compatible thermoplastic resins, compounds, recycled plastics and other suitable polymer materials.
MFR: NRM
Stock No.:
54687033Used Manufacturing Resources 4 stage conveyor washer. Stainless steel construction. The system has a primary wash stage, a secondary wash stage (220 gallon total wash stage), a fresh water rinse stag...
Used-Manufacturing Resources 4 stage conveyor washer. Stainless steel construction. The system has a primary wash stage, a secondary wash stage (220 gallon total wash stage), a fresh water rinse stage (80 gallon), and a rust inhibitor stage (80 gallon). Conveyed on a stainless steel flat wire belt through 10" wide x 5.75" high opening. Water is heated to 135° F – 145° F by electric heaters. Unit includes separate electric drying unit. Control cabinet included. Good Condition.
Stock No.:
54687051Used Shred-Tech model ST-25EL shredder. The shredder has a 16" W x 34.5" L chamber opening, (40) 7.75" diameter knives. Has gear reducer. Missing its motor.
Used-Shred-Tech model ST-25EL shredder. The shredder has a 16" W x 34.5" L chamber opening, (40) 7.75" diameter knives. Has gear reducer. Missing its motor.
MFR: Shred-Tech
Types of Used Plastics Equipment Available
Aaron Equipment offers a wide selection of used plastics equipment designed to support extrusion, molding, compounding, pelletizing, and recycling processes across a variety of polymer materials and production requirements:
Single Screw Extruders – Widely used extrusion systems for processing thermoplastics into film, sheet, pipe, and profile products.
Twin Screw Co-Rotate Extruders – High-performance compounding extruders designed for precise mixing, blending, and material modification.
Injection Molders – Horizontal – Standard molding machines used for high-volume production of plastic parts with consistent precision.
Pelletizing Machinery – Strand Pelletizers – Systems used to cut extruded plastic strands into uniform pellets for downstream processing or sale.
Size Reduction – Grinders and Granulators – Equipment designed to reduce scrap plastic into reusable material for recycling and reprocessing.
Blown Film Lines – Complete systems for producing plastic films used in packaging, bags, and flexible materials.
Plastics Equipment Applications & Industry Uses
Used plastics equipment supports a wide range of manufacturing and recycling operations where plastic materials must be formed, processed, or reconditioned. Common applications include:
Packaging Manufacturing: Production of films, bags, containers, and flexible packaging materials
Automotive & Industrial: Molding and extrusion of durable plastic components and parts
Recycling Operations: Size reduction, washing, and pelletizing of post-industrial and post-consumer plasticsConstruction Materials: Production of pipe, profiles, insulation, and structural components
Consumer Goods: High-volume manufacturing of plastic products and housings
These systems play a critical role in maintaining material consistency, throughput efficiency, and product quality across plastics processing operations.
Used Plastics Equipment Buying Considerations
When selecting used plastics equipment, it is important to evaluate both process requirements and equipment condition:
Material Compatibility: Ensure equipment supports specific polymers such as PE, PP, PVC, PET, or engineered resins
Process Type: Determine whether extrusion, molding, pelletizing, or recycling systems are required
Throughput & Output Capacity: Match machine performance with production targets
Screw & Barrel Design: Critical for mixing efficiency, melt quality, and product consistency
Control Systems & Automation: Evaluate PLC systems, controls, and integration capabilities
Condition & Maintenance History: Review wear components, rebuild status, and prior application.
Why Buy Used Plastics Equipment
Buying used plastics equipment provides a cost-effective solution for expanding production capacity or upgrading existing processing lines. Used systems reduce capital investment while offering proven, industrial-grade performance. Many machines are available for immediate shipment, helping facilities avoid long lead times and maintain production schedules.
With access to a wide range of equipment types and manufacturers, Aaron Equipment helps processors find reliable plastics machinery tailored to their specific operational needs.
Sell Your Used Plastics Equipment
Aaron Equipment actively purchases surplus plastics equipment, including extrusion systems, injection molding machines, and recycling lines. Whether you are upgrading equipment or liquidating assets, our team can help maximize equipment value.
Plastics equipment is used to process, form, and recycle plastic materials through operations such as extrusion, injection molding, pelletizing, and size reduction. These systems are essential in manufacturing and recycling environments.
Common types include extruders, injection molding machines, pelletizers, shredders, grinders, and film production lines. Each type supports a specific stage of plastics processing or recycling.
Choosing the right equipment depends on material type, production volume, and process requirements. Evaluating machine configuration, throughput, and compatibility with existing systems is critical.
Yes. Many plastics machines are built for long service life and can remain highly reliable when properly maintained, inspected, or refurbished prior to purchase.
Plastic recycling systems typically include shredders, grinders, wash lines, and pelletizers that convert scrap plastic into reusable raw material for reprocessing.