Used Industrial Mixers & Blenders for Sale
Used industrial mixers and used blenders are processing systems designed to combine, disperse, emulsify, or homogenize materials across a wide range of industries. These machines handle powders, granules, liquids, and high-viscosity materials in both batch and continuous operations. Common applications include food processing, chemicals, pharmaceuticals, plastics, and cosmetics manufacturing. Aaron Equipment offers a large inventory of used industrial mixers and blenders in various configurations to support specific mixing requirements, production capacities, and material characteristics.
Stock No.:
42467004Used Teledyne Readco Continuous Compounder Processor – 28" x 97" Barrel, 125 HP Motor
Used- Teledyne Readco Continuous Compounder Processor. Size approximately 28" diameter x 97" long barrel, Each screw is approx. 14" Diameter. stainless steel contact parts, non-jacketed. 15" x 26" feed section. 6" x 26" discharge section driven by a 125 HP Westinghouse electric motor 3/60/230/460 Volt, 1780 RPM, Dodge TXM gearbox ratio 20.55:1, final output 85 RPM. Includes a removable top cover.
MFR: Teledyne Readco
Stock No.:
11059342Used Littleford Model FKM-4000-D Stainless Steel Jacketed Plough Mixer – 4000L Capacity
Used- Littleford Model FKM-4000-D Stainless Steel Jacketed Plough / Plow Mixer. 4000 Liter Capacity. Jacket rated 75 PSI at 320 Degrees F. National Board# 1272. Driven by 125 HP, 460 volt motor into gear reducer. Serial # 40671-3267. All product surfaces 316 Stainless Steel, polished to 120 Grit. OAD: Approx. 16' L x 6' W x 8' h. RECONDITIONED AND NOT USED SINCE.
MFR: Littleford
Stock No.:
11059274Used Littleford Vacuum Plow Mixer/Dryer – Model VT-4000 (4000L Capacity)
Used Littleford Vacuum Plow Mixer/Dryer Model VT-4000 (4000L Capacity), 304 Stainless Steel. Approximately 54" diameter x 121" straight side with dished ends. Internal rated 15 PSI/VACUUM @ 250 degrees f., Stainless steel jacket rated for 75 psi at 250 deg.f. 6" diameter shaft, 8 bolt-on plow blades, 2 end scrapers, provision for 4 choppers, air purged main seals. Driven by a 50hp motor through gearbox. Various top openings. 6" diameter off-center bottom outlet. Unit mounted on carbon steel frame. Included VFD Control Panel. National Board# 1260. Serial# 11363.
MFR: Littleford
Stock No.:
40328055Used A. Bolz MF400 Vertical Conical Mixer – 4000L Working Capacity, 316 SS, Explosion-Proof Motors, Pharma Grade
A. Bolz GmbH & Co KG Vertical Conical Batch (Nauta type) Mixer, Model MF400. Material of construction is 316 (V4A 1.4401/04) on product contact parts. Inside polished to corn 240. Total capacity 326.66 cu ft. (9250 liters), working capacity 141.25 cu. ft. (4000 liters). Not jacketed. Inside rated for 1.5 PSI (0.1 bar) at 176 deg F (80 deg C). Screw mixing device driven via a gearbox by (1) x Loher, type ENGV 160MB-160MB-04C 400-volt/50cycle/3Ph & (1) Loher, type ENCV-090LB-04 C 1.35 KW-400volt/50cycle/3Ph explosion-proof motors. Incl. Manway and bottom outlet. Hanging type incl. 3 claws. Overall dimensions 91" (2800 mm) x 91" (2800 mm) x 162" (5000 mm) high. Weight empty approx. 4 tonnes. Previously used in a Pharma application. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.
MFR: Bolz
Stock No.:
54687152Used 900 gal/120 cu. ft. capacity. One 8" discharge nozzle other discharge nozzle welded shut. Mixing chamber is 48” wide x 115” long. The straight side length is 27". Total volume of about 1095 gal/...
Used-900 gal/120 cu. ft. capacity. One 8" discharge nozzle other discharge nozzle welded shut. Mixing chamber is 48” wide x 115” long. The straight side length is 27". Total volume of about 1095 gal/145 cu. ft.. Overall size of mixer only is 64" wide x 149" long x 77.75" tall. Reducer is Falk 402-8EZ3-06A3. Motor 40HP 230/460 3 phase.
Stock No.:
10715043IN STOCK- Paul O. Abbe, Model RB-15 Ribbon Blender.New.
NEW & IN STOCK- Paul O. Abbe, Model RB-15 Ribbon Blender. In -Stock .15 Cubic Foot working capacity. 18 Cubic Foot total volume. Type 304 stainless steel polished. Food grade. All stainless steel construction. Trough dimensions: Approximately 24.4" wide x 48.9" long x 28.8" deep. Internal double spiral ribbon. Packing glands and pillow block bearings. 10 hp SEW Euro drive hollow bore design. 230/460 volt, 1775 rpm, 3/60 with approximately output 60 rpm. Top cover with hold down clamps and limit switch. Center Loading cover with welded safety grate, 11.8" wide x 19.7" long. Approximate 4.7" wide x 14.2" flush air operated plug valve. Discharge housing is approximate 18.5" wide x 24" long. Approximately 35.5" discharge height. Approximate weight 1,870 pounds. Approximate overall dimensions: 41.1" wide x 86.6" long x 86.6" high. Controls are available upon request.
MFR: Paul O Abbe
Stock No.:
51099004Used Myers Tri-Shaft Disperser-Mixer-Emulsifier – 100 Gallon, Stainless Steel
Used- Myers Tri-Shaft Combination Disperser-Mixer-Emulsifier, Model V550/500EH-15-25, with approximately 100-gallon (375-liter) jacketed 304 stainless steel mixing vessel measuring 30" diameter x 36" straight side with dished top, flat bottom, 14 psi jacket rating, and internal vacuum rating. Equipped with three explosion-proof variable-speed drives totaling 55 HP: 15 HP three-wing anchor agitator with side and bottom scrapers, 25 HP high-speed paddle blade, and 15 HP third-shaft drive without mixing element. Motors are 3-phase, 60 Hz, 230/460 volt, with the anchor motor rated at 1765 rpm. Dual-post mounted with hydraulic lift pump. Serial #977. Suitable for high-viscosity mixing, dispersing, and emulsifying applications involving adhesives, sealants, inks, coatings, caulks, gels, creams, pastes, and pigmented dispersions.
MFR: Myers
Stock No.:
53267184Used Continental Mark VI Rollo-Mixer 74-115/90 – 115 Cu Ft
Used- Continental Mark VI Rollo-Mixer, Model 74-115/90. Carbon steel construction. Mixer is designed for maximum load capacity of 115 cubic feet, with a maximum load weight of 12,300 lbs. Rated for an average finished batch density of 90 lbs per cubic foot, resulting in a batch capacity of 10,350 lbs. Driven by a 15 HP motor. Unit comes with (2) unused stainless steel liquid injectors. Serial # 2776. Suitable applications include industrial dry powder blending, granular material mixing, agricultural chemicals, fertilizers, mineral blends, and dry bulk products requiring liquid additive incorporation.
MFR: Continental
Stock No.:
53318004Used Myers Tri-Shaft Disperser-Mixer-Emulsifier – 36” Diameter, Hydraulic Lift, Refurbished
Used- Myers Tri-Shaft Disperser-Mixer-Emulsifier Mixer, Model V550/500A-15-7.5-25-1151. Top dished head,approximately 36" diameter. Does not include mix tank.Center sweep agitator with side and bottom scrapers. Top offset entering high speed disperser. Top offset entering intermediate mixer. Air over oil hydraulic lift. Single hoist design. Control panel with (3) ABB variable speed drives. Refurbished by Dantco, Model DTS-25HS-15LS-7.5BL, Serial #031218.
Stock No.:
54690001Used 2022 Marion OX-15-CS 15 Cu. Ft. Paddle Mixer – 7.5 HP Carbon Steel Batch Blender with 8" Discharge
Used- Marion Process Paddle Mixer, Model OX-15-CS. 15 Cubic foot capacity. Mixer features a 2-3/16'' carbon steel main shaft with welded blades, with clearance set at 1/8''. Driven by a 7.5 HP motor. 27'' wide x 48'' long mixing chamber opening. Equipped with an 8'' diameter lever-actuated butterfly discharge valve. Includes a 21" x 48" safety grate, 3" OD vent tube with safety guard, removable seal access covers, and 240V start/stop and emergency-stop control panel. Mounted on (4) carbon steel legs. Serial # 22014, built 2022. Possible applications include batch mixing and blending of chemical powders, plastic resins, minerals, agricultural materials, dry ingredients, granules, and other free-flowing or moderately cohesive bulk solids.
MFR: Marion
Stock No.:
54445002Used 140 Cu Ft Dual Shaft Ribbon Blender – Stainless Steel Industrial Mixer
Used dual-shaft ribbon blender with approximately 150 cu. ft. / 1,100-gallon capacity and stainless steel construction. Unit features a dimple jacket, dual bottom discharge with (2) 10" ports, one for each screw. Dimensions of approximately 119" long x 46" high x 47" wide. Bottom of the blender sits approximately 12" off the ground. Unit is currently equipped with (2) 15 HP, 575V motors, which will be replaced with (2) used U.S.-voltage motors. Possible applications and suitable products include blending, mixing, and homogenizing compatible powders, granules, dry ingredients, and other bulk solid materials.
Stock No.:
10715040IN STOCK- Paul O. Abbe Model RB-165 Ribbon Blender. New.
NEW & IN STOCK- Paul O. Abbe Model RB-165 Ribbon Blender. In -Stock 165 Cubic Foot working capacity. 180 Cubic Foot total volume. Type 304 stainless steel polished. Food grade. All stainless steel construction. Trough dimensions: Approximately 53.6" wide x 110.3" long x 58.3" deep. Internal double spiral ribbon. Packing glands and pillow block bearings. 50 hp SEW Euro drive hollow bore design. 230/460 volt, 1775 rpm, 3/60 with approximately output 28 rpm. Top cover with hold down clamps and limit switch. Center Loading cover with welded safety grate, 30" wide x 50" long. Approximate 4.7" wide x 19.7" flush air operated plug valve. Discharge housing is approximate 20.5" wide x 28.4" long. Approximately 4" discharge height. Approximate weight 10,164 pounds. Approximate overall dimensions: 74" wide x 167" long x 85.5" high. Controls are available upon request.
MFR: Paul O Abbe
Types of Used Mixers Available
Aaron Equipment offers a wide selection of used industrial mixers and blenders designed for different materials, viscosities, and processing requirements:
Disperser Mixers – High-speed mixers designed for dispersing powders into liquids and breaking down agglomerates.
Double Arm Mixers – Heavy-duty mixers used for kneading high-viscosity materials such as rubber, adhesives, and doughs.
Double Cone Mixers & V-Blenders – Tumbling blenders ideal for achieving uniform mixing of dry powders and free-flowing solids.
Ribbon Blenders – Horizontal mixers with internal ribbon agitators for efficient blending of powders and light pastes.
Paddle Mixers – Low-shear mixers designed to gently blend fragile, heat-sensitive, or bulk solid materials.
Planetary Mixers – Mixers with rotating blades and bowls for thorough mixing of viscous, dense, or sticky materials.
Mixer Applications & Industry Uses
Used industrial mixers and blenders are widely used in processes where material consistency and uniformity are critical. Common industry applications include:
Food & Beverage: Blending powders, doughs, sauces, spices, and nutritional products
Pharmaceutical & Nutraceutical: Uniform mixing of active ingredients and excipients
Chemical Processing: Production of coatings, resins, adhesives, and specialty chemicals
Plastics & Polymers: Compounding materials prior to extrusion or molding
Cosmetics & Personal Care: Mixing creams, lotions, gels, and emulsions
Cannabis Processing: Blending biomass, oils, and infused products
Used Mixer Buying Considerations
When selecting used industrial mixers and used blenders, it is important to evaluate both process requirements and equipment specifications:
Material Type & Viscosity: Match mixer design to product flow and shear requirements
Batch vs. Continuous Operation: Select equipment based on production volume and workflow
Agitation Style: Ribbon, paddle, planetary, or high-shear depending on mixing goals
Capacity & Throughput: Ensure vessel size and motor power align with production needs
Material of Construction: Stainless steel for sanitary or corrosive environments
Condition & Prior Use: Review maintenance history and previous application
Why Buy Used Industrial Mixers & Blenders
Buying used industrial mixers and used blenders provides a cost-effective solution for expanding or upgrading processing operations. Used equipment reduces capital investment while offering reliable performance from proven designs. Many units are available for immediate shipment, helping minimize downtime and accelerate installation timelines. With a wide range of sizes, configurations, and manufacturers available, used mixers offer flexibility for facilities with evolving production needs.
Sell Your Used Mixers
Aaron Equipment actively purchases surplus and used industrial mixers and blenders. Whether you are upgrading equipment, shutting down a line, or liquidating assets, our team can help maximize the value of your equipment.
Industrial mixers are used to combine, blend, or homogenize materials such as powders, liquids, and slurries. They are essential in industries like food processing, chemicals, pharmaceuticals, and plastics where product consistency is critical.
A mixer typically handles a wider range of materials, including high-viscosity substances, using mechanical agitation. A blender is generally used for dry powders or free-flowing solids where gentle, uniform mixing is required.
Choosing the right mixer depends on material properties, viscosity, batch size, and required mixing intensity. Evaluating agitation type, capacity, and construction material helps ensure compatibility with your process.
Yes. Used industrial mixers are often built for long service life and can remain highly reliable when properly maintained and inspected prior to purchase.
Ribbon blenders, paddle mixers, and V-blenders are commonly used for powders due to their ability to achieve uniform mixing without excessive shear or material degradation..