Used Industrial Mixers & Blenders for Sale
Used industrial mixers and used blenders are processing systems designed to combine, disperse, emulsify, or homogenize materials across a wide range of industries. These machines handle powders, granules, liquids, and high-viscosity materials in both batch and continuous operations. Common applications include food processing, chemicals, pharmaceuticals, plastics, and cosmetics manufacturing. Aaron Equipment offers a large inventory of used industrial mixers and blenders in various configurations to support specific mixing requirements, production capacities, and material characteristics.
Stock No.:
53029001Used Fryma VME-50/C Vacuum Paste/Cream Mixer – 50L, 316 SS, Jacketed
Used- Fryma Vacuum Paste/Cream Mixer, Model VME-50/C. 50 liter (13 gallon) maximum working capacity. 90 liter (24 gallon) total capacity, 43.5 PSI Double Jacket Working Pressure, 316 Stainless Steel Construction. Includes: Vacuum pump driven by 1.5 HP Motor. 480V/3/60Hz.
MFR: Fryma
Stock No.:
10151559Used Winkworth ZX500-6 Z-Blade Mixer-Extruder | 500L Working | Vacuum Lid | Jacketed | 304 SS | With Tool Temp Units
Used Winkworth ZX500-6 Z-Blade Mixer/Extruder | 500L Working | Vacuum Lid | Jacketed | 304 SS | With Tool Temp Units. 500 liter (132Gal) working capacity with a 778 liter total capacity (product dependent). 304 stainless steel chamber measures approx. 1,090mm long x 956mm wide x 735mm deep. Unit has vacuum rated domed hood/lid. 304 stainless steel external jacket. Each Z-blade driven by 30kw (40hp) motor/gearbox. Stainless steel screw discharge driven by 22kw motor/gearbox. Unit includes control panel. Includes (1) used Tool Temp model TT-14500 H and (1) Used Tool Temp model TT-508 X heater/cooling units. Also includes (3) Hydac oil coolers mounted on common frame. Unit has main control unit and local operator controls. Motors are dual rated 50/60 Hz. Blade Bowl Clearance Straight side 3mm , End 4mm. Cooling Jacket Design Pressure Min Atmos Max 3.5 bar.G Design Temp Min 10C Max 250C Test Pressure 6.7 bar.G Design & Manufacturing Code SEP (Sound Engineering Practise). Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.
MFR: Winkworth
Stock No.:
10715039IN STOCK AND NEW- Paul O. Abbe Model RB-135 Ribbon Blender.
NEW & IN STOCK- Paul O. Abbe Model RB-135 Ribbon Blender. In -Stock .135 Cubic Foot working capacity. 146 Cubic Foot total volume. Type 304 stainless steel polished. Food grade. All stainless steel construction. Trough dimensions: Approximately 49.6" wide x 105.5" long x 53.6" deep. Internal double spiral ribbon. Packing glands and pillow block bearings. 40 hp SEW Euro drive hollow bore design. 230/460 volt, 1775 rpm, 3/60 with approximately output 33 rpm. Top cover with hold down clamps and limit switch. Center Loading cover with welded safety grate, 30" wide x 50" long. Approximate 4.7" wide x 19.7" flush air operated plug valve. Discharge housing is approximate 20.5" wide x 28.4" long. Approximately 8" discharge height. Approximate weight 7,920 pounds. Approximate overall dimensions: 64.8" wide x 158.3" long x 84.7" high. Controls are available upon request.
MFR: Paul O Abbe
Stock No.:
51258019J.H. Day 135 Cu Ft Ribbon Blender, Stainless Steel, (2) Bag Dump Stations, XP Motor
Used J.H. Day Stainless Steel Double Spiral Ribbon Blender, Approximate 135 Cuft. With top cover and (2) bag dump stations. 30 HP XP motor & reducer, center bottom outlet with valve. Serial# 85051.
Stock No.:
42467004Used Teledyne Readco Continuous Compounder Processor – 28" x 97" Barrel, 125 HP Motor
Used- Teledyne Readco Continuous Compounder Processor. Size approximately 28" diameter x 97" long barrel, Each screw is approx. 14" Diameter. stainless steel contact parts, non-jacketed. 15" x 26" feed section. 6" x 26" discharge section driven by a 125 HP Westinghouse electric motor 3/60/230/460 Volt, 1780 RPM, Dodge TXM gearbox ratio 20.55:1, final output 85 RPM. Includes a removable top cover.
MFR: Teledyne Readco
Stock No.:
54445002Used 140 Cu Ft Dual Shaft Ribbon Blender – Stainless Steel Industrial Mixer
Used Dual Shaft Ribbon Blender, Approximately 140 cuft / 1100 Gallon capacity. Stainless steel. Dimple Jacket. Bottom Discharge: (2) 10" ports, one for each screw, Trough dimensions: Length: 119 inches Height: 46 inches Width: 47 inches. Height off ground: 12 inches Bottom discharge. (2) 575 Volt, 15 HP motors. (Motors will be switched out to (2) Used US voltage Motors;
Stock No.:
11059342Used Littleford Model FKM-4000-D Stainless Steel Jacketed Plough Mixer – 4000L Capacity
Used- Littleford Model FKM-4000-D Stainless Steel Jacketed Plough / Plow Mixer. 4000 Liter Capacity. Jacket rated 75 PSI at 320 Degrees F. National Board# 1272. Driven by 125 HP, 460 volt motor into gear reducer. Serial # 40671-3267. All product surfaces 316 Stainless Steel, polished to 120 Grit. OAD: Approx. 16' L x 6' W x 8' h. RECONDITIONED AND NOT USED SINCE.
MFR: Littleford
Stock No.:
11059274Used Littleford Vacuum Plow Mixer/Dryer – Model VT-4000 (4000L Capacity)
Used Littleford Vacuum Plow Mixer/Dryer Model VT-4000 (4000L Capacity), 304 Stainless Steel. Approximately 54" diameter x 121" straight side with dished ends. Internal rated 15 PSI/VACUUM @ 250 degrees f., Stainless steel jacket rated for 75 psi at 250 deg.f. 6" diameter shaft, 8 bolt-on plow blades, 2 end scrapers, provision for 4 choppers, air purged main seals. Driven by a 50hp motor through gearbox. Various top openings. 6" diameter off-center bottom outlet. Unit mounted on carbon steel frame. Included VFD Control Panel. National Board# 1260. Serial# 11363.
MFR: Littleford
Stock No.:
40328055Used A. Bolz MF400 Vertical Conical Mixer – 4000L Working Capacity, 316 SS, Explosion-Proof Motors, Pharma Grade
A. Bolz GmbH & Co KG Vertical Conical Batch (Nauta type) Mixer, Model MF400. Material of construction is 316 (V4A 1.4401/04) on product contact parts. Inside polished to corn 240. Total capacity 326.66 cu ft. (9250 liters), working capacity 141.25 cu. ft. (4000 liters). Not jacketed. Inside rated for 1.5 PSI (0.1 bar) at 176 deg F (80 deg C). Screw mixing device driven via a gearbox by (1) x Loher, type ENGV 160MB-160MB-04C 400-volt/50cycle/3Ph & (1) Loher, type ENCV-090LB-04 C 1.35 KW-400volt/50cycle/3Ph explosion-proof motors. Incl. Manway and bottom outlet. Hanging type incl. 3 claws. Overall dimensions 91" (2800 mm) x 91" (2800 mm) x 162" (5000 mm) high. Weight empty approx. 4 tonnes. Previously used in a Pharma application. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.
MFR: Bolz
Stock No.:
10715043IN STOCK- Paul O. Abbe, Model RB-15 Ribbon Blender.New.
NEW & IN STOCK- Paul O. Abbe, Model RB-15 Ribbon Blender. In -Stock .15 Cubic Foot working capacity. 18 Cubic Foot total volume. Type 304 stainless steel polished. Food grade. All stainless steel construction. Trough dimensions: Approximately 24.4" wide x 48.9" long x 28.8" deep. Internal double spiral ribbon. Packing glands and pillow block bearings. 10 hp SEW Euro drive hollow bore design. 230/460 volt, 1775 rpm, 3/60 with approximately output 60 rpm. Top cover with hold down clamps and limit switch. Center Loading cover with welded safety grate, 11.8" wide x 19.7" long. Approximate 4.7" wide x 14.2" flush air operated plug valve. Discharge housing is approximate 18.5" wide x 24" long. Approximately 35.5" discharge height. Approximate weight 1,870 pounds. Approximate overall dimensions: 41.1" wide x 86.6" long x 86.6" high. Controls are available upon request.
MFR: Paul O Abbe
Stock No.:
51099004Used Myers Tri-Shaft Disperser-Mixer-Emulsifier – 100 Gallon, Stainless Steel
Used- Myers Tri-Shaft Combination Disperser-Mixer-Emulsifier, Model V550/500EH-15-25, with approximately 100-gallon (375-liter) jacketed 304 stainless steel mixing vessel measuring 30" diameter x 36" straight side with dished top, flat bottom, 14 psi jacket rating, and internal vacuum rating. Equipped with three explosion-proof variable-speed drives totaling 55 HP: 15 HP three-wing anchor agitator with side and bottom scrapers, 25 HP high-speed paddle blade, and 15 HP third-shaft drive without mixing element. Motors are 3-phase, 60 Hz, 230/460 volt, with the anchor motor rated at 1765 rpm. Dual-post mounted with hydraulic lift pump. Serial #977. Suitable for high-viscosity mixing, dispersing, and emulsifying applications involving adhesives, sealants, inks, coatings, caulks, gels, creams, pastes, and pigmented dispersions.
MFR: Myers
Stock No.:
53318004Used Myers Tri-Shaft Disperser-Mixer-Emulsifier – 36” Diameter, Hydraulic Lift, Refurbished
Used- Myers Tri-Shaft Disperser-Mixer-Emulsifier Mixer, Model V550/500A-15-7.5-25-1151. Top dished head,approximately 36" diameter. Does not include mix tank.Center sweep agitator with side and bottom scrapers. Top offset entering high speed disperser. Top offset entering intermediate mixer. Air over oil hydraulic lift. Single hoist design. Control panel with (3) ABB variable speed drives. Refurbished by Dantco, Model DTS-25HS-15LS-7.5BL, Serial #031218.
Types of Used Mixers Available
Aaron Equipment offers a wide selection of used industrial mixers and blenders designed for different materials, viscosities, and processing requirements:
Disperser Mixers – High-speed mixers designed for dispersing powders into liquids and breaking down agglomerates.
Double Arm Mixers – Heavy-duty mixers used for kneading high-viscosity materials such as rubber, adhesives, and doughs.
Double Cone Mixers & V-Blenders – Tumbling blenders ideal for achieving uniform mixing of dry powders and free-flowing solids.
Ribbon Blenders – Horizontal mixers with internal ribbon agitators for efficient blending of powders and light pastes.
Paddle Mixers – Low-shear mixers designed to gently blend fragile, heat-sensitive, or bulk solid materials.
Planetary Mixers – Mixers with rotating blades and bowls for thorough mixing of viscous, dense, or sticky materials.
Mixer Applications & Industry Uses
Used industrial mixers and blenders are widely used in processes where material consistency and uniformity are critical. Common industry applications include:
Food & Beverage: Blending powders, doughs, sauces, spices, and nutritional products
Pharmaceutical & Nutraceutical: Uniform mixing of active ingredients and excipients
Chemical Processing: Production of coatings, resins, adhesives, and specialty chemicals
Plastics & Polymers: Compounding materials prior to extrusion or molding
Cosmetics & Personal Care: Mixing creams, lotions, gels, and emulsions
Cannabis Processing: Blending biomass, oils, and infused products
Used Mixer Buying Considerations
When selecting used industrial mixers and used blenders, it is important to evaluate both process requirements and equipment specifications:
Material Type & Viscosity: Match mixer design to product flow and shear requirements
Batch vs. Continuous Operation: Select equipment based on production volume and workflow
Agitation Style: Ribbon, paddle, planetary, or high-shear depending on mixing goals
Capacity & Throughput: Ensure vessel size and motor power align with production needs
Material of Construction: Stainless steel for sanitary or corrosive environments
Condition & Prior Use: Review maintenance history and previous application
Why Buy Used Industrial Mixers & Blenders
Buying used industrial mixers and used blenders provides a cost-effective solution for expanding or upgrading processing operations. Used equipment reduces capital investment while offering reliable performance from proven designs. Many units are available for immediate shipment, helping minimize downtime and accelerate installation timelines. With a wide range of sizes, configurations, and manufacturers available, used mixers offer flexibility for facilities with evolving production needs.
Sell Your Used Mixers
Aaron Equipment actively purchases surplus and used industrial mixers and blenders. Whether you are upgrading equipment, shutting down a line, or liquidating assets, our team can help maximize the value of your equipment.
Industrial mixers are used to combine, blend, or homogenize materials such as powders, liquids, and slurries. They are essential in industries like food processing, chemicals, pharmaceuticals, and plastics where product consistency is critical.
A mixer typically handles a wider range of materials, including high-viscosity substances, using mechanical agitation. A blender is generally used for dry powders or free-flowing solids where gentle, uniform mixing is required.
Choosing the right mixer depends on material properties, viscosity, batch size, and required mixing intensity. Evaluating agitation type, capacity, and construction material helps ensure compatibility with your process.
Yes. Used industrial mixers are often built for long service life and can remain highly reliable when properly maintained and inspected prior to purchase.
Ribbon blenders, paddle mixers, and V-blenders are commonly used for powders due to their ability to achieve uniform mixing without excessive shear or material degradation..