Complete Industrial Plants for Sale

Used Semi-Automated Mushroom Substrate Processing System for Sale

Used Semi-automated Mushroom Substrate Processing System. Integrates high-performance components to efficiently manage pasteurization, cooling, inoculation, and packaging all within a single vessel. Two jacketed Patterson All-Weld Paddle Mixers (37 cubic feet each) operate simultaneously to blend substrate ingredients uniformly while maintaining controlled processing conditions. Substrate moisture content is controlled using a Water Metering Sensor (FD-Q20C) and circulating pump, which measures amount of water added from a 120-gallon (A.O. Smith) hot water tank into the substrate. The mixers heat the substrate up to 98c through their closed loop hydronic heating jackets. The Reimers (RHC-360) Electric Steam Boiler feeds steam to the Cascade Flow Control Solutions Heat Exchanger (263450-004) which heats the hydronic jacket loop. A steam actuating valve (STERLCO D151-F) modulates steam flow from the boiler, maintaining optimal jacket temperatures and pressure needed to reliably pasteurize substrate. After pasteurization, the substrate is cooled via the jackets which are isolated and chilled through a two-stage Thermaline Heat Exchanger (T8 S-20). The first cooling stage transfers substrate heat to municipal water. The heated municipal water is collected in the 120 gallon water tank for later use in substrate hydration. The second cooling stage uses glycol chilled by a G&D 10 HP (GD-10H-HT) unit to rapidly reduce substrate temperature for inoculation. Inoculation is performed through a hatch under sterile Air Science flow hoods (36" and 24"), providing clean, positive-pressure air to prevent contamination. Substrate packaging takes place at the bottom of each vessel through an 8" pneumatic actuating valve in unicorn bags, long tubes, or by connection to another system. Mixer #2 uses a Spartan Controls automated control package to manage processing parameters like mixing, heating, cooling, and packaging via integrated sensors and pneumatic valves. Mixer #1 is manually operated. Sterile air filters from Davis Controls maintain sterile positive-pressure conditions in the mixers throughout the entire process. The steam and hydronic system include Axiom DMF-300 and CBF-2 chemical dosing units to maintain system pressure, fluid levels, and chemical treatment of jacket water. Supporting components including solenoid valves, expansion tanks, gauges, and pipework in steel, stainless, brass, copper, and PEX ensures durability and resistance to temperature fluctuations. Boiler chemicals in the heating loop and inhibited glycol in the chilling loop protect the system from oxidation. The integrated system enables efficient, scalable, and consistent production of high-quality mushroom substrate with reduced labor cost and precise control over all critical processing parameters.

30 TPD ASU with NLU Plant

Used- 30 TPD ASU with NLU Plant designed & supplied by Cosmodyne USA in 1995. Argon purification unit non-cryogenic (H2 used for O2 removal). Power 1,361 kW. Main products; Liquid Oxygen (LOX) purity 99.6% O2 Liquid Nitrogen (LIN) purity 5 ppm O2 Liquid Argon (LAr) purity 99.999% Ar. Main equipment; Main air compressor; Ingersoll Rand Nitrogen compressors; Ingersoll Rand Expansion turbines; ACD Pre-purification unit; Cosmodyne Refrigeration units Coldbox; Cosmodyne Control system Siemens PCS7; ASU had been in operation since commissioning in 1996 and was stopped in Q3 2023 due to commissioning of new ASU. Refurbished rotor assemblies for air compressor available as spare. Refurbished spare motor available that can be used for air or nitrogen compressors. ASU major turnaround maintenance required before restart. The plants expansion turbine, nitrogen & main compressors, pre-purification, refrigeration units and all other machinery are in good condition, and the plant itself is in fully working and operational condition. Additionally, the control panel is modified to the latest PCS-7M Siemens Control System. Plat equipment: (3) Centec main air compressors; (2) ACD turbines; (1) Jalal cooling tower; (3) cooling water pumps; (3) Copland refrigeration systems; (1) Cosmodyne purification skid; (1) Cosmodyne argon purification skid; (1) Cosmodyne cold box; (1) Cosmodyne Control Room and LV Power distribution panels (containerized); (3) Servomax O2 analyzers; (1) Teledyne N2% analyzer; (1) Teledyne hydrogen % analyzer; (1) Horiba PPM CO2 analyzer; (1) Cryogenic Batch tank (12000Sm3 Liquide Oxygen); (1) Cryognic Liquid Oxygen transfer pump.

Used Modular Multistage Continuous Processor Debranner – 8” Diameter, 5-Stage, 304 Stainless (Pilot Plant)

Used- Modular Multistage Continuous Processor Debranner. 8"diameter, 5-stage, 304 stainless, with drives, valves, and controller. (3) stages have double-ribbon constant-volume mixing impellers, (2) have screw impellers. (5) variable-speed impeller drives, 3 reversible. (2) Carolina Conveying rotary valves. Acrison feeder. Honeywell multi-channel programmable controller. Shells are 8" sch 40 pipe. Rulon seals and bearings. Suspension lugs on each module not shown in drawing. Built 2007. Previously used in a pilot plant debranning corn. Currently crated and ready to ship.

Used Complete 153,000bpd Crude Oil Terminal Stabilization Plant

Used- Complete 153,000bpd Crude Oil Terminal Stabilization Plant consisting of: (1) Degasser Unit (Unit ID 9600) with Heat Transfer Unit, (1) Gas Plant (Unit ID 9400), (1) Liquified Gas Treating Unit (Unit ID 9330). Including piping, valves, safety equipment and additional infrastructure. Further details and technical documentation are available upon request. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

Used ANHYDRO Falling Film Vacuum Evaporator – 6,500 kg/h | MVR x2 | 5 Calendria | CIP

Used- ANHYDRO falling film vacuum evaporator. Complete ANHYDRO falling film vacuum evaporator with mechanical vapour recompression units Was originally designed as a TVR evaporator and in operation for milk concentration in a Norwegian dairy. This evaporator plant was relocated and redesigned by BONTECH A/S (Denmark) for 6.500 kg/hour water evaporation for stick water from fish industry and now operating with 2 units of mechanical vapour recovery units (MVR) in serial connection. The 5 calendria has a total of 121, 100, 38, 38 and 13 pipes - each ?51 mm and 7 meters long. It is complete with CIP plant and still installed. This plant is in excellent working condition and ready to be relocated and put back in operation, after reconditioning of pumps etc. The Westfalia separator is not included in this listing. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible

MFR: Anhydro

Used Ethanol Recovery Distillation Skid – 76% Recovery Rate, Hastelloy Construction

Used- Ethanol Recovery Skid / Distillation system, designed by Process Plus, is capable of processing 5,994 lb/h (718 gal/h) of ethanol-containing wastewater and producing 4,566 lb/h (692 gal/h) of ethanol, achieving a 76% recovery rate. The system includes a Steam Stripper Column (S-426-804) with packing, a Feed Economizer (HX404-804), a Bottoms Cooler (HX408-804), a Reboiler (HX-405-804), and an Overhead Condenser (HX-406-804). Wastewater containing ethanol, water, methanol, and trace solids is fed into the Steam Stripper Column (CL-108), a Hastelloy C-276 unit manufactured by Hebeler, rated for 34FV at 300F, and measuring approximately 44 feet in height and 2.5 feet in diameter (National Board #110, Serial #A148, built 1994). Ethanol is separated from the feed through a reboiler loop that circulates column bottoms via a pump. Solids are removed through a small purge stream, which is cooled to 115F using 85F cooling water in the Bottoms Cooler before being discharged. The ethanol-rich overhead vapor is condensed and cooled to 140F in the Overhead Condenser and flows by gravity to a Reflux Drum. From there, it is either returned to the column as reflux or sent out as product. When the Heat Recovery Condenser is in service, vapors are partially condensed there before final condensation and subcooling in the Column Condenser. The resulting ethanol product contains less than 0.1 wt% water, while the purge stream contains less than 1 wt% ethanol. The systems Hastelloy construction also allows for use in other solvent recovery applications requiring corrosion-resistant materials.

Used Fishmeal Plant – 10 MT/Hour Raw Material Intake, Complete Processing Line

Used- Fishmeal Plant, 10 MT/Hour raw material intake consisting of: Infeed mill breaker, Atlas vertical cooker, Atlas screw press, Atlas disc dryer, Alfa Laval decanter, Flottweg Tricanter, 3 effect Evaporator, Cooling towers, Morisa Boilers, Conveying, Controls and additional infrastructure. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

Used Cleaning and Sizing Herb Processing Line

Used- Cleaning and Sizing Herb Processing Line. Perfect for leafy herbs such as oregano, cilantro, parsley basil, rosemary, and more. Line consists of: Aluminum platform for staged product feed to first hopper; Large self contained rotary Brush machine with adjustable variable speed, 36" diameter x 72" long stainless steel drum screen, 1/4" stainless steel staggered round holes with automatic stem discharge, WiFi capability; 24" wide x 168" long stainless steel inclined belt conveyor, cleated belt (in-feed product conveyor); 36" wide inclined conveyor, discharge from brush machine (new food grade cleated belting); Stainless steel vibratory screener with (3) discharges; (4) Ideal indent separators; Ideal indent cleaner, 28" shells; Automatic shrink wrapper; Elevated mobile cleated food grade belt conveyor with hopper; Stainless steel hopper; 6000# floor scale; (3) Stainless steel cone hoppers; (2) pneumatic air movers; 160 cu. ft. stainless steel hopper; (3) Sudenga bucket elevators; 4" x 6" neoprene cups, 20 length each (Extra belting, extensions, and cups included); (2 ) Oliver 160 gravity tables, ( 1) left hand and (1) one right hand (40 mesh screens on table deck); 48" diameter stainless steel Sweco sifter; Jacobsen 25 hp hammermill; (2) Allis Chalmers box 48"X 48" sifters. Designed and assembled by experienced personnel involved in the large volume herb cleaning business for over 45 years. Seller will assist buyer reassemble and complete set up at buyers site for a nominal fee.

Used Complete Lipids Production Plant – Evaporator, Alfa Laval Disc Centrifuge, Centritherm & Tanks

Used- Complete Lipids Production Plant. Consisting of: Modified Niro recirculating single effect evaporator (Ethanol extraction) operating in a semi-continuous manner. Alfa Laval Centri-therm Model CT6, 1.1kg(lb) per kg (lb) evaporated water, max concentrate viscosity 20,000cP, 11.5kW. Seitel Model SE13X centrifugal self-cleaning separator, sludge chamber capacity 1.7 liter, bowl speed 9600rpm, 5.5kW, max outlet pressure 4 bar, skimming capacity 2,000 liter, clarification & standardization capacity 3,000 liter per hour. CECO Rotary Sieve / Strainer Lipids filter tank. Page & Macrae Condenser vessel, shell rated 5 to 95 degrees C at -101.4 to 0 kPA, tube rated 24 to 35 degrees C at 0 to 500 kPa. Jacketed and single wall Stainless steel Tanks and Reactors, Heat Exchangers, Pumps, Valves, Controls. Bag Dump station & screw conveyor ancillary controls, and piping. Being sold as is, loaded on customers trucks. All motors are 50 cycles. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

Used Crown Iron Works Model 48 Milling Ring Flash Drying System | Food Grade Industrial Flash Dryer

Used- Crown Iron Works, Model 48, Milling Ring Flash Drying System. It was designed and used for food-grade orange pulp with 17,000 Lbs/Hr capacity but the plant can be used for a wide range of applications in various industries including: Drying food products such as grains, cereals, fruits, vegetables, herbs, and spices. Pharmaceutical ingredients, intermediates, and final products Drying various chemicals, including powders, granules, and crystalline materials Drying minerals and mining products such as ores, concentrates, and mineral powders Animal Feed Drying and processing environmental materials, such as sludges, biomass, and waste products. System designed for drying of powers, filter & centrifuge cakes, and slurries where a discrete and fine end product is desired. The Milling Flash Dryer is basically a low energy jet mill, that uses jets of low-pressure air to encourage inter particle collisions between pieces of feed material. These inter particle collisions break up the feed material in the dryer with no moving parts in the dryer or airstream. The dryer is in the shape of a torus, or donut that is broken up into 2 basic areas: (1) Manifold & Milling area; (2) Classifier. The ideal feed material for the Flash Dryer is a crumbly and free flowing cake that breaks up readily when it enters the drying air stream. The feed material enters the recirculating hot air upstream of the first nozzle, with the centrifugal forces generated by the air concentrating the material in the area above the nozzles. Particle-to-particle collisions begin immediately, deagglomerating the material before hard agglomerates can form. A tremendous amount of surface area is created allowing evaporation to occur quickly, thereby depressing air temperature in a very short period of time. Centrifugal forces are generated by the recirculating gases within the dryer, forcing the larger particles to the peripheral walls. Finer material is displaced towards the inside radius of the dryer where the classifier outlet is located. Fine product exits the dryer along with the exhaust gas vapor. Larger particles or agglomerates are recycled to the nozzle area dryer for further de-agglomeration and drying.

MFR: Crown Iron Works

Used 220 Gallon Stainless Steel Petroleum Mixing Tank & Metered Transfer System – 5 HP Agitator with Blackmer Pump

Used- Petroleum Mixing Tank and Measurement System. Approximately 220 Gallon stainless steel vertical mixing tank with 5 HP top-entry agitator, nitrogen purge system, level controls, and enclosed control panel. System includes a Blackmer positive displacement transfer pump, flow meter/totalizer, pressure gauges, product filter/strainer, stainless steel piping, valves, and a dedicated transfer skid. Designed for petroleum blending, product transfer, and measured dispensing, with integrated mixer and pump controls, high/low level protection, and nitrogen purge for handling flammable products.

Complete Plastics Recycling & Compounding Manufacturing Plant Featuring Multiple Twin Screw Extrusion Lines, Recycling Systems, Silos, Laboratories & Industrial Real Estate

Used- Complete Plastics Compounding Extrusion Plant consisting of: (1) Leistriz ZSE 60-40D MAXX Twin Screw Extrusion Line output 900-1200 kgs per hour, (1) Coperion ZSK 70 SC Twin Screw Extrusion Line output 800-1000 per hour, (1) Noris ZSC 60 Twin Screw Extrusion Line output 650-800 kgs per hour, (1) Leistritz ZSE 60 MAXX-36D Twin Screw Extruder, (1) Lindner Micromat 2500 Single Roll Shredder, (1) Dreher Plastics Granulation & Washing System, (1) THM Recycling Solutions Granulation System, (1) Zeppelin CMB 300 High Intensive Mixer.(6) Zeppelin Silos, (1) Pilot Plant, (2) Labs, (1) Injection Molding Machine, Workshop, Waste Water Treatment, Production and Storage buildings & much more. Previously used in a plastic recycling application. Can be purchased incl. buildings and land.