Machine Tools

High-Performance Famar Tandem 200 CNC Lathe

Used- Famar Automatic CNC Lathe, Model Tandem 200. 150mm (5.9") max diameter; 140mm (5.5"); Working strokes: X x Z, 313mm (approximate 12.5") x 250mm (approximate 10"); 827mm X-axis total stroke; 90m/minute high speed; 60m/minute Z-axis fastest speed; 313mm X-axis motor torque, 250mm Z-axis motor torque. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Famar

Precision Used CNC Lathe – Famar Tandem 200

Used- Famar Automatic CNC Lathe, Model Tandem 200. 150mm (5.9") max diameter; 140mm (5.5"); Working strokes: X x Z, 313mm (approximate 12.5") x 250mm (approximate 10"); 827mm X-axis total stroke; 90m/minute high speed; 60m/minute Z-axis fastest speed; 313mm X-axis motor torque, 250mm Z-axis motor torque. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Famar

High-Speed Used CNC Lathe – Famar Tandem 200 Model

Used- Famar Automatic CNC Lathe, Model Tandem 200. 150mm (5.9") max diameter; 140mm (5.5"); Working strokes: X x Z, 313mm (approximate 12.5") x 250mm (approximate 10"); 827mm X-axis total stroke; 90m/minute high speed; 60m/minute Z-axis fastest speed; 313mm X-axis motor torque, 250mm Z-axis motor torque. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Famar

Used BESI Fico MMS-X Molding Machine – 180 Ton Clamp Force (Built 2023)

Used- Besi Molding Machine, Model Fico MMS-X. 180 ton max. clamp force. Up to 125mm x 300mm x 10mm strip size. 150mm max. mold opening. 150 bar max. transfer pressure. 14, 14.3, 16, or 18mm pellet diameter. Max. of 12 plungers. +/- 2 degrees C max. cavity temperature difference. 3/50-60/208-480V. Built 2023.

Used Park Industries Fastback Flat Edge Polisher | Single Pass Stone Edge Finisher

Used- Park Industries Flat Edge Polisher, Model Fastback. Single-pass edge finisher. Feed speed of 12" min. Works with material that is 1 - 6 cm thick. 3/60/240V. 100 Full load Amps. Serial # 206829.

Used HTC Hydraulic Shear – 1/2" Mild Steel, 3/8" Stainless Capacity – Industrial Plate Cutting

Used- HTC Shear. 1/2" mild steel cutting capacity; 3/8" stainless steel cutting capacity. 3/230-460V. Approx. OAD: 12.5 L x 8.33 W x 9.3 H.

MFR: HTC

Used Custom Made Automated Sonic Welding Machine

Used- Custom Made Automated Sonic Welding Machine. OAD: 56" L x 73" W x 80" H. 1/60/240V. Built 2007/2008. Previously used to weld plastic cigarette filters.

Used Thermatool Tube Cutting Machine - 2”-4.5” OD, ABB Drives, Scrap Conveyors

Used- Thermatool Tube Cut-Off Machine. OD Range: 2"-4.5", Max Wall Diameter: .235". Max Speed 250 FPM, Hydraulic Accelerator Hydraulic Clutch, Encoder, Two Scrap Goose Neck Conveyors Unico Controller, ABB Drives, spare cut off die.

Used OMAX Maxiem 1530 Waterjet Cutter – 52" x 122" Table | 30 HP Pump | 50,000 PSI | CNC Control

Used- OMax Maxiem Waterjet Cutting System; Model 1530; Cutting Area 52" X 10 Table Size 58" X 122" Z-Axis Travel 6" Intensifier Output 50,000 PSI Motor Size 30 HP; Equipped with OMax PC Based CNC Control; Omax M30 Direct Drive Pump; 500 Lb Abrasive Hopper; dual Side Drive Precision Rack & Pinion; Abrasive Hopper Settling Tank;

Used Omax 80X Precision Waterjet Cutting System | CNC Industrial Waterjet Cutter

Used- Omax Precision Waterjet Cutting System, Model 80X. Cutting Area 13' 4'' long x 6' 8'' wide. Table size 15' long x 7' 5'' wide. Speeds up to 180" min. Repeatability within 0.001''. Includes Garner sand tank and control cabinet. Serial # K511537.

Used Kulicke & Soffa Asterion Wedge Bonding Machine – Advanced Precision (Built 2023)

Used- Kulicke and Soffa Wedge Bonding Machine, Model Asterion. 300mm x 300mm bondable area. 0.1 um X and Y axes; 0.1 um Z-axis, 50mm Z-stroke; +/- 220 degree theta axis, .0057 degree theta axis resolution. 710mm D x 225mm H material handler bay size w/o insert, 710mm D x 460mm H open bay size. GS4 Pattern Recognition vision system. 1/50-60hZ/200-240V. Built 2023.

Used Pro Fusion Welding Lathe PFL-1216-37 – 36" Center to Center | TSS-2 Sharpshooter Included

Used- Pro Fusion Custom Welding Lathe, Model PFL-1216-37. Made to be 36" center to center instead of the stock 16" with TSS-2 Sharpshooter tungsten sharpener set