Used Cannabis Equipment for Sale
Used cannabis equipment includes a wide range of industrial processing, extraction, drying, and packaging systems designed for cannabis and hemp operations. These systems support critical steps such as biomass preparation, extraction, distillation, and final product packaging. Aaron Equipment offers used cannabis equipment for sale across multiple process stages, helping producers scale operations while reducing capital investment. Browse available inventory below or explore specific equipment types to find solutions aligned with your production requirements.
Stock No.:
54621003Used FarmMax Interceptor Multi-Crop Biomass Collection System – 7,500–15,000 Lb/Hr Harvester Attachment & Covered Wagon
Used- FarmMax Multi-Crop Biomass Collection System, Model Interceptor. Designed for use with John Deere S-Series combines. The Interceptor can harvest from 7,500 to 15,000 pounds of flower per hour depending on harvest conditions. System collects crop residue/biomass during harvesting and transfers collected material through a hydraulic blower and discharge chute into covered receiving wagon. Includes Interceptor harvester attachment with hydraulic drive, blower assembly, discharge chute, and covered tow-behind receiving wagon. Previously used for hemp harvesting applications, covered dump wagon ensures there are less trichomes escaping with dust. Serial # FMX20210005, built 2021.
Stock No.:
54202001Used Hemp Processing Solutions Stationary BudRubber – 5,000 lbs/hr Capacity, Flower/Fiber Separator with Conveyor and Control Panel
Used Hemp Processing Solutions Stationary BudRubber hemp flower and fiber separation system with up to 5,000 lbs/hr capacity on properly dried material. Designed to separate hemp buds and flowers from stalk and fiber, the system includes a Stationary BudRubber conveyor, straw-walker separator with bulk bag rack/hanger, and electrical control panel. Feed material should have moisture below 20%, with ideal operating moisture of approximately 1015%. Throughput is dependent on moisture, feedstock variety, stem content, feed consistency, and desired separation quality. Serial #2019468. Possible applications include hemp biomass processing, flower and bud separation, stalk and fiber separation, and processing properly dried hemp biomass.
Stock No.:
54217001Used iDry Standard Cannabis Curing Dryer | 360-Tray Capacity | Touch Screen Controls | 60–70°F | 3PH/480V | 20’L x 7’W x 7’H
Used iDry Standard Cannabis Curing Dryer. Designed for controlled-temperature drying and curing applications. Unit features an operating temperature range of 6070 degrees F at an ambient temperature of 70 degrees F. Maximum capacity of 360 trays measuring 30" L x 16" W x 2" deep with perforated bottoms, complete with (15) tray dollies. Maximum product height of 1.5". Equipped with touchscreen controls for operation and monitoring. Overall dimensions of 20' L x 7' W x 7' H. Electrical requirements: 480V, 3-phase. Suitable applications include cannabis and hemp drying and curing, particularly harvested flower and other botanical products requiring controlled low-temperature processing.
Stock No.:
53977001Used IES CDMH.20-2x-2f Supercritical CO2 Extractor – 40L, 850–3500 PSI, CBD-Grade, 2020
IES Supercritical CO2 Extractor, Model CDMH.20-2x-2f. 20 liters per extraction vessel 40 total liters volume; 4 17.6 lbs (1.8 8 kg) per extraction vessel capacity; 4 kg/min +/-5% maximum flow rate; 850-3500 psi (58.6-241.3 bar), 50-140F (10-60C) solvent range; 400-650 psi (27.5-44.8 bar), 65-140F (18- 60C) expansion range; Sub & Supercritical Extraction Capabilities; Hydraulically Driven Gas Booster Pump; Fully Automated Control System; 100% Communication with Ancillary Equipment; Produce high-quality cannabis oil, terpenes, and other valuable extracts; Extract essential oils and other bioactive compounds from various botanical materials. Includes 7.5 Ton Air Cooled Chiller and Hydraulic Power Unit. Serial # 5522-1189, Built 2020. Previously used for CBD oil.
Stock No.:
54621001Used Maratek RS 150-W-AF-DDC-RC 110-Gallon Solvent Recovery & Recycling System – Stainless Steel
Used- Maratek Solvent Recovery and Recycling System, Model RS 150-W-AF-DDC-RC. Stainless steel construction. 110 gallon capacity. Thermal oil heated vessel with top-entering gear-driven agitator. Equipped with pneumatically actuated valves, process pump, instrumentation, and controls. Includes (2) stainless steel Cobetter cartridge filter housings mounted on stainless steel frame. Filter housings rated for 140 degrees C and constructed of 304 stainless steel. Maximum working temperature 210 degrees C. Cracking temperature 320 degrees C. 3/60/480V. Serial# 0517 1 2269.
Stock No.:
70995004Maxco Model MEG-24L Automatic Case Former – Wide Format, KD Ready
Used Maxco Case Erector, Model MEG-24L. Capable of speeds up to 35 cases per minute. Case size range: (Length)6" - 24" (Width) 8" - 14" (Depth) 6" - 18". KD length: 12" min. 34" max. KD width: 12" min. 28" max. Has Allen micrologix PLC and Allen Bradley PanelView 550. Serial #YO715. ** SALE SUBJECT TO SELLER'S APPROVAL **
MFR: Maxco
Stock No.:
53811001Used MRX Xtractor FIYRR-XTR 20L Supercritical CO2 Extraction System
Used MRX Xtractor, model FIYRR-XTR 20L, Supercritical, close loop, fluid/CO2/botanical extraction system. Run time dependent on biomass quarator vessels, with NBN - 1325, 1322, 1324 ( 2015) 230-460v, 50/60hz. Control panel with AB PanelView Hmi and Compact Logix ethernet module. Festo pneumatic valve control bank, maximator pneumatic part. Haskel refrigerant recovery pump, associated valves on tubular stainless frame. ntity, 1800psi, dual phase pump ( liquid ad gas), with JV Northwest Inc, stainless extraction, accumulation and separator vessels, with NBN - 1325, 1322, 1324 ( 2015) 230-460v, 50/60hz, control panel with AB PanelView Hmi and Compact Logix ethernet module, Festo pneumatic valve control bank, maximator pneumatic part, Haskel refrigerant recovery pump, associated valves on tubular stainless frame.
Stock No.:
51188011Used Myers Vacuum Macro-36 Centrifugal Molecular Distillation System – 100–400 Lbs/Hr with Edwards High-Vacuum Pump Package
Used- Myers Vacuum, Inc. Model Macro-36 Centrifugal Molecular (Short-Path) Distillation System, designed for high-vacuum, low-temperature separation and purification of heat-sensitive materials. Rated processing capacity of approximately 100400 lbs per hour, depending on product characteristics. Features stainless steel product-contact construction, heated rotating centrifugal disk, internal water-cooled condenser, insulated vacuum chamber with hydraulically operated swing-open dome for access to internal components, and fabricated structural steel support frame with integrated hydraulic power unit. Includes Edwards Model GXS 450/2600 two-stage dry vacuum pumping package with screw pump and Roots-type booster, dedicated Myers Vacuum process control panel with multiple Watlow PID temperature controllers, vacuum instrumentation, rotor drive controls, process timers, and HMI touchscreen. System is designed for applications including molecular distillation, essential oil and fragrance processing, deodorization, ester purification, and separation of volatile components from heat-sensitive organic materials. Equipment is reportedly complete as documented with main distillation chamber, support frame, hydraulic system, vacuum pump package, and controls. Previously installed and subsequently decommissioned. Operating condition and completeness of auxiliary components to be verified.
MFR: Myers
Stock No.:
54160001Used Pinnacle Stainless Extraction Skid – High-Efficiency Solvent Recovery System
Used Pinnacle Stainless Extraction Skid High-Efficiency Solvent Recovery System. Feed Compositions: Alcohol 96.5%, Steam Pressure 1224 PSI, 99.9%, Feed Compositions: Oil 3.5%, Cooling Water Temp. 7C, Alcohol Recovery Rate 400 LPH, Distillate Composition: Alcohol 99.9%, 100% engineered and fabricated in house by Pinnacle Stainless in Denver, CO, 100L/hr solvent recovery rate, 35 kW steam generator and 25 kW chiller at 40F required for operation, Closed-loop system designed for safe operation, Equipment built to food and sanitary standards, Rising film technology for minimal degradation, Third-party engineer peer-reviewed, Touch screen operation, UL hazardous location controls, Pinnacle Stainless SRS Evaporator Skid, Pinnacle Stainless C1D2 UL Listed & Approved Electronics, Training and Install Support, System Dimensions 98" x 40" x 95", System Weight: 2400 lbs (including crating), Closed-loop system designed for safe operation, 400L/hr solvent recovery rate, Rising film technology for minimal degradation, Equipment built to food sanitary standards, Touch Screen operation, UL hazardous location controls, Third-party engineer peer-reviewed, 100% engineered and fabricated in house by Pinnacle Stainless in Denver, CO, 140 kW steam generator and 100 kW chiller at 40F required for operation, Pinnacle Stainless SRS Evaporator Skid, Pinnacle Stainless C1D2 UL Listed & Approved Electronics, Training and Install Support, System Dimensions 114.25" x 43.5" x 98.25", System Weight: 2400 lbs
MFR: Pinnacle Stainless
Stock No.:
53396001Used Pope 6" Stainless Steel Cannabinoid Distillation System for Sale
Used- Pope Scientific 6" Stainless Steel Cannabinoid Distillation System. System consists of: 6" molecular still complete with variable speed drive mechanism; self-supporting still stand; SS still body; SS internal condenser 6L glass graduated feed and degasser flask w/ stopper; 5L glass distillate receiver flask; 5L glass residue receiver flask; glass cold trap; 316 SS wiper retainer; Teflon wiper blades; all necessary glass to SS adapters. Includes: Metal band heater set for 6" SS still body w/ high temperature cordset ceramic insulators; J" thermocouple and insulating jacket installed for temperatures up to 707 degrees F (375 degrees C) 50/240V; digital temperature controller with automatic tuning of proportional band; integral time and derivative time parameters, setpoint. and process displays; 500 ml receiver flask for smaller batches; 1000 ml receiver flask; (2) 2L receiver flask; (2) five liter receiver flask; external condenser with 24/25 stopper for 6" still; (4) heat controller for noncritical feed/degasser. 50/60/120V. Built 2019.
MFR: Pope Scientific
Stock No.:
54717001Unused 40' Containerized Hydrocarbon Extraction Lab with Precision PX1 Extractor
Unused 40' Containerized Hydrocarbon Extraction Lab with Precision PX1 Extractor. Equipment consists of: Precision Extraction Model PX1 hydrocarbon extractor; Precision Model GC 5000 gas compressor; Julabo Corio CD circulator; (3) Across International Accutemp Model AT19drying oven; Across International T40 Cold Trap; Welch CRVpro vacuum pump; 24" purge fan; 12" exhaust fan; Mitsubishi MUZ/MSZ Series heat pump; Electro Industries makeup air unit; Cook ACRU Series roof mounted fan; (2) Ruskin louvers; All motorized and manual dampers; Two Berko electric heaters; and alarm system.
MFR: Precision
Stock No.:
53905001Used Precision Extraction Solutions X10 MSE Butane Extraction System - 5-10 lbs/hr, 2021, With MVP Pump
Used- Precision Extraction Solutions Extraction System, Model X10 MSE. 5-10 lbs./hour capacity; 40-60 minute cycle time; 32.5 lbs. solvent capacity; 250 PSIG MAWP. With MVP 6 CFM, 60 PSI, 12 GPH recovery pump. Extraction skid OAD: 44" L x 46" W x 69" H. Built 2021. Previously used for butane extraction of cannabis.
MFR: Precision Extraction Solutions
Types of Used Cannabis Equipment Available
Aaron Equipment offers a range of used cannabis equipment designed to support cultivation, processing, and product finishing applications:
Cannabis & Hemp Drying Equipment – Systems designed to remove moisture from harvested biomass while preserving cannabinoid and terpene profiles.
Cannabis & Hemp Extraction Equipment – Equipment used for solvent-based or mechanical extraction of cannabinoids and essential oils from plant material.
Cannabis & Hemp Packaging Equipment – Machinery for filling, sealing, labeling, and preparing finished cannabis products for distribution.
Cannabis & Hemp Trimmers – Automated or semi-automated systems used to trim harvested cannabis flower efficiently and consistently.
Cannabis & Hemp Distillation Equipment – Systems used to refine extracts and isolate cannabinoids through fractional distillation processes.
Cannabis Equipment Applications & Industry Uses
Used cannabis equipment supports a wide range of operations across the cannabis and hemp industry, from cultivation through finished product packaging. These systems are commonly used in:
Cannabis cultivation and greenhouse operations.
Biomass drying and curing processes.
Extraction and post-processing of cannabinoids and terpenes.
Distillation and refinement of oils and concentrates.
Edible, tincture, and vape product manufacturing.
Packaging and labeling for retail distribution.
Used Cannabis Equipment Buying Considerations
When selecting used cannabis equipment, consider both your process requirements and the condition of the equipment:
Process Stage: Identify whether equipment is needed for cultivation, extraction, refinement, or packaging.
Throughput & Capacity: Ensure equipment aligns with your production volume and future growth plans.
Material Compatibility: Verify construction materials meet regulatory requirements and product purity standards.
Automation & Controls: Evaluate system integration, automation level, and ease of operation.
Condition & Compliance: Review maintenance history, cleanliness, and compliance with applicable industry standards.
Why Buy Used Cannabis Equipment
Buying used cannabis equipment allows processors to reduce capital expenditures while accessing proven, industrial-grade machinery. Many systems are available for immediate delivery, helping avoid long lead times associated with new equipment. Used equipment also provides flexibility for scaling operations or entering new markets without significant upfront investment.
Sell Your Used Cannabis Equipment
Aaron Equipment actively purchases surplus and used cannabis equipment across all processing stages, including extraction, drying, distillation, trimming, and packaging systems. If you are upgrading your facility, liquidating assets, or have idle equipment, our team can assist with direct purchases or consignment options to help maximize the value of your equipment.
Cannabis equipment refers to machinery used in the cultivation, processing, extraction, and packaging of cannabis and hemp products. This includes drying systems, extraction units, distillation equipment, trimmers, and packaging lines designed to handle biomass and produce finished goods.
Common types of used cannabis equipment include drying equipment, extraction and processing systems, distillation units, trimming machines, and packaging equipment. Each type supports a specific stage of cannabis production, from raw biomass handling to finished product preparation.
Choosing the right cannabis equipment depends on your production stage, throughput requirements, and product type. Consider whether you need equipment for extraction, drying, or packaging, and evaluate capacity, automation, and material compatibility to ensure it fits your operation.
The cost of used cannabis equipment varies based on equipment type, size, manufacturer, and condition. Specialized systems such as extraction or distillation units typically command higher prices. Contacting a sales representative can help determine availability and pricing for your specific needs.
Yes. Aaron Equipment purchases surplus and used cannabis equipment across a wide range of categories. Whether you are selling individual machines or complete processing lines, our team can evaluate your equipment and provide buyout or consignment options.