Your Files Are Being Processed
Please Wait
Contact Information
Phone: 630-350-2200
Toll Free: 1-800-49-AARON
Email: websales@aaronequipment.com
Used Gloucester Model 35250R2 3.5" Diameter Single Screw Extruder. 3.5" diameter screw, 32:1 L/D. Has an electrically heated, air cooled, vented, and plugged barrel at approximately a 65? center line height. Barrel is set up for Contra-Cool but does not include blower. Gearbox has a reduction ratio of 18.17:1 and is direct driven in a wraparound manner by a 100 HP Baldor D/C motor with Saftronics SCR control. One (1) HP pump with heat exchanger on the gearbox. Originally manufactured in 1995 and completely reconditioned in 2011 and never put back into service. All wiring on the extruder is run to a terminal strip. New control panel has fourteen (14) zones of temperature controls. Drive control is loose. Includes three (3) new / rebuilt screws. 460/3/60. Serial# 36736/12.
Manufacturer | GloucesterGloucester |
Model | 35250R2 |
Serial # | 36736/12 |
Category | Plastics EquipmentPlastics Equipment |
Subcategory | Extruders - Single Screw ExtruderExtruders - Single Screw Extruder |
Manufacturer Information:
Description:
The Gloucester Model 35250R2 is a 3.5-inch diameter single screw extruder with a 32:1 L/D ratio, designed for industrial plastic extrusion applications. It features an electrically heated, air-cooled, vented, and plugged barrel at a 65" centerline height. The extruder is set up for Contra-Cool but does not include a blower. It has an 18.17:1 gearbox reduction ratio, directly driven in a wraparound manner by a 100 HP Baldor D/C motor with Saftronics SCR control. The extruder includes a 1 HP pump with a heat exchanger on the gearbox, and all wiring is connected to a terminal strip for easy operation.
This unit was fully reconditioned in 2011 but was never put back into service. It includes a new control panel with 14 temperature control zones, a loose drive control, and three (3) new/rebuilt screws. Operates at 460V/3PH/60Hz.
Specifications:
Applications:
Products That Would Use This Machine:
Plastic, Plastic Blow Molding, Plastic blown film, plastic color compounding, Plastic Colorants, Plastic film, Plastic Granules, Plastic Parts, Plastic Sheet, Plastics, Plastics / Pellets, Plastics Blown Film, Plastics Equipment
Used Gloucester Model 35250R2 3.5" Diameter Single Screw Extruder. 3.5" diameter screw, 32:1 L/D. Has an electrically heated, air cooled, vented, and plugged barrel at approximately a 65? center line height. Barrel is set up for Contra-Cool but does not include blower. Gearbox has a reduction ratio of 18.17:1 and is direct driven in a wraparound manner by a 100 HP Baldor D/C motor with Saftronics SCR control. One (1) HP pump with heat exchanger on the gearbox. Originally manufactured in 1995 and completely reconditioned in 2011 and never put back into service. All wiring on the extruder is run to a terminal strip. New control panel has fourteen (14) zones of temperature controls. Drive control is loose. Includes three (3) new / rebuilt screws. 460/3/60. Serial# 36736/12.
Manufacturer Information:
Description:
The Gloucester Model 35250R2 is a 3.5-inch diameter single screw extruder with a 32:1 L/D ratio, designed for industrial plastic extrusion applications. It features an electrically heated, air-cooled, vented, and plugged barrel at a 65" centerline height. The extruder is set up for Contra-Cool but does not include a blower. It has an 18.17:1 gearbox reduction ratio, directly driven in a wraparound manner by a 100 HP Baldor D/C motor with Saftronics SCR control. The extruder includes a 1 HP pump with a heat exchanger on the gearbox, and all wiring is connected to a terminal strip for easy operation.
This unit was fully reconditioned in 2011 but was never put back into service. It includes a new control panel with 14 temperature control zones, a loose drive control, and three (3) new/rebuilt screws. Operates at 460V/3PH/60Hz.
Specifications:
Applications:
Products That Would Use This Machine:
Plastic, Plastic Blow Molding, Plastic blown film, plastic color compounding, Plastic Colorants, Plastic film, Plastic Granules, Plastic Parts, Plastic Sheet, Plastics, Plastics / Pellets, Plastics Blown Film, Plastics Equipment
Manufacturer | Gloucester |
Model | 35250R2 |
Serial # | 36736/12 |
Category | Plastics Equipment |
Subcategory | Extruders - Single Screw Extruder |
We pay "Top Dollar" for your idle process equipment! Fill out our form and our buying team will get back to you.
SELL YOUR EQUIPMENTView our entire process equipment inventory online or visit our location for an equipment inspection.
View Inventory