Your Files Are Being Processed
Please Wait
Contact Information
Phone: 630-350-2200
Toll Free: 1-800-49-AARON
Email: websales@aaronequipment.com
Used Davis Standard 10" Extruder, Model 100TH100D. 38:1 L/D ratio; (8) zone electrically heated, water cooled and non-vented barrel at nominal 44" center-line. 15.08:1 Gearbox reduction ratio; Rated at 1800 HP at a service factor of 1.5; Gearbox currently set to be dual direct driven in back of the gearbox. Last driven by two (2) 700 HP D/C motors; Liquid cooling system with heat exchanger for gearbox protection; Trendelkamp screen changer w/ stand mounted on the extruder discharge. Temperature control panel and drives included. Motors available at additional cost. Temperature controllers not included. Serial# L3201. Built 1991. Last used in the extrusion of biaxially oriented PP film.
Manufacturer | Davis StandardDavis Standard |
Model | 100TH100D |
Serial # | L3201 |
Category | Plastics EquipmentPlastics Equipment |
Subcategory | Extruders - Single Screw ExtruderExtruders - Single Screw Extruder |
The Used Davis Standard 10" Extruder, Model 100TH100D, is a high-performance industrial extruder designed for large-scale polymer processing. Featuring a 38:1 L/D ratio, this extruder is built for applications requiring high melt homogeneity and precise processing control.
The electrically heated, water-cooled, non-vented barrel operates at a 44” nominal center-line height with 8 heating zones. The gearbox has a 15.08:1 reduction ratio and is rated for 1,800 HP at a 1.5 service factor. The extruder was previously driven by two (2) 700 HP D/C motors, which are available for purchase separately.
For optimized melt filtration, the extruder is equipped with a Trendelkamp screen changer mounted on the discharge. The system includes a liquid cooling system with a heat exchanger for gearbox protection, as well as a temperature control panel and drives. Temperature controllers are not included.
Previously used in the extrusion of biaxially oriented polypropylene (BOPP) film, this extruder is ideal for high-output film production and polymer processing.
This Davis Standard 10" extruder is ideal for:
Automotive, Building Materials, Construction Materials, Extrusion Blow Molding, Industrial, medical, Medical Device, Packaging, Plastic, Plastic Bag, Plastic Blow Molding, Rubber, Wire and cable, Wire products
Used Davis Standard 10" Extruder, Model 100TH100D. 38:1 L/D ratio; (8) zone electrically heated, water cooled and non-vented barrel at nominal 44" center-line. 15.08:1 Gearbox reduction ratio; Rated at 1800 HP at a service factor of 1.5; Gearbox currently set to be dual direct driven in back of the gearbox. Last driven by two (2) 700 HP D/C motors; Liquid cooling system with heat exchanger for gearbox protection; Trendelkamp screen changer w/ stand mounted on the extruder discharge. Temperature control panel and drives included. Motors available at additional cost. Temperature controllers not included. Serial# L3201. Built 1991. Last used in the extrusion of biaxially oriented PP film.
The Used Davis Standard 10" Extruder, Model 100TH100D, is a high-performance industrial extruder designed for large-scale polymer processing. Featuring a 38:1 L/D ratio, this extruder is built for applications requiring high melt homogeneity and precise processing control.
The electrically heated, water-cooled, non-vented barrel operates at a 44” nominal center-line height with 8 heating zones. The gearbox has a 15.08:1 reduction ratio and is rated for 1,800 HP at a 1.5 service factor. The extruder was previously driven by two (2) 700 HP D/C motors, which are available for purchase separately.
For optimized melt filtration, the extruder is equipped with a Trendelkamp screen changer mounted on the discharge. The system includes a liquid cooling system with a heat exchanger for gearbox protection, as well as a temperature control panel and drives. Temperature controllers are not included.
Previously used in the extrusion of biaxially oriented polypropylene (BOPP) film, this extruder is ideal for high-output film production and polymer processing.
This Davis Standard 10" extruder is ideal for:
Automotive, Building Materials, Construction Materials, Extrusion Blow Molding, Industrial, medical, Medical Device, Packaging, Plastic, Plastic Bag, Plastic Blow Molding, Rubber, Wire and cable, Wire products
Manufacturer | Davis Standard |
Model | 100TH100D |
Serial # | L3201 |
Category | Plastics Equipment |
Subcategory | Extruders - Single Screw Extruder |
We pay "Top Dollar" for your idle process equipment! Fill out our form and our buying team will get back to you.
SELL YOUR EQUIPMENTView our entire process equipment inventory online or visit our location for an equipment inspection.
View Inventory