Your Files Are Being Processed
Please Wait
Contact Information
Phone: 630-350-2200
Toll Free: 1-800-49-AARON
Email: websales@aaronequipment.com
Used Gloucester Single Screw Extruder, Model 25225R2. 2.5' Diameter Screw, 32:1 L/D. Has an electrically heated, air cooled, and non-vented barrel at approximately a 65? center line height. Barrel is set up for Contra-Cool but does not include blower. Gearbox has a reduction ratio 13.75:1 and is direct driven in a wraparound manner by a 60 HP Baldor D/C motor with Saftronics SCR control. One (1) HP pump with heat exchanger on the gearbox. Originally manufactured in 1995 and completely reconditioned in 2011 and never put back into service. All wiring on the extruder is run to a terminal strip. New control panel has fourteen (14) zones of temperature controls. Drive control is supplied loose. Includes two (2) new / rebuilt screws. 460/3/60. Serial# 36736/25.
Manufacturer | GloucesterGloucester |
Model | 25225R2 |
Serial # | 36736/25 |
Category | Plastics EquipmentPlastics Equipment |
Subcategory | Extruders - Single Screw ExtruderExtruders - Single Screw Extruder |
The Gloucester 25225R2 Single Screw Extruder is a high-performance plastic extrusion system, designed for efficient and precise polymer processing. Featuring a 2.5" diameter screw with a 32:1 L/D ratio, this extruder ensures consistent material processing with an electrically heated, air-cooled, non-vented barrel at an approximate 65” centerline height.
The barrel is Contra-Cool ready but does not include a blower. The gearbox, with a 13.75:1 reduction ratio, is direct-driven in a wraparound manner by a 60 HP Baldor DC motor, offering smooth operation and consistent extrusion control. The system is controlled via Saftronics SCR drive control, providing precise motor speed and torque adjustments.
This extruder includes a 1 HP pump with a heat exchanger on the gearbox, ensuring optimal temperature regulation and efficient system performance. The unit was originally manufactured in 1995 and completely reconditioned in 2011 but never put back into service, making it an excellent option for those seeking a near-new extruder at a used price.
The new control panel features fourteen (14) temperature control zones, enhancing process stability and material consistency. Additionally, all wiring is run to a terminal strip, simplifying electrical connections. The drive control is supplied loose, allowing for custom integration into an existing production setup.
This extruder includes two (2) new/rebuilt screws, providing additional value and process flexibility.
Plastic, Plastic Additives, Plastic Colorants, Plastic film, Plastic Parts, Plastic Pellets, Plastic Sheet, Plastics, Plastics Blow Molding, Plastics Blown Film, Plastics Equipment
Used Gloucester Single Screw Extruder, Model 25225R2. 2.5' Diameter Screw, 32:1 L/D. Has an electrically heated, air cooled, and non-vented barrel at approximately a 65? center line height. Barrel is set up for Contra-Cool but does not include blower. Gearbox has a reduction ratio 13.75:1 and is direct driven in a wraparound manner by a 60 HP Baldor D/C motor with Saftronics SCR control. One (1) HP pump with heat exchanger on the gearbox. Originally manufactured in 1995 and completely reconditioned in 2011 and never put back into service. All wiring on the extruder is run to a terminal strip. New control panel has fourteen (14) zones of temperature controls. Drive control is supplied loose. Includes two (2) new / rebuilt screws. 460/3/60. Serial# 36736/25.
The Gloucester 25225R2 Single Screw Extruder is a high-performance plastic extrusion system, designed for efficient and precise polymer processing. Featuring a 2.5" diameter screw with a 32:1 L/D ratio, this extruder ensures consistent material processing with an electrically heated, air-cooled, non-vented barrel at an approximate 65” centerline height.
The barrel is Contra-Cool ready but does not include a blower. The gearbox, with a 13.75:1 reduction ratio, is direct-driven in a wraparound manner by a 60 HP Baldor DC motor, offering smooth operation and consistent extrusion control. The system is controlled via Saftronics SCR drive control, providing precise motor speed and torque adjustments.
This extruder includes a 1 HP pump with a heat exchanger on the gearbox, ensuring optimal temperature regulation and efficient system performance. The unit was originally manufactured in 1995 and completely reconditioned in 2011 but never put back into service, making it an excellent option for those seeking a near-new extruder at a used price.
The new control panel features fourteen (14) temperature control zones, enhancing process stability and material consistency. Additionally, all wiring is run to a terminal strip, simplifying electrical connections. The drive control is supplied loose, allowing for custom integration into an existing production setup.
This extruder includes two (2) new/rebuilt screws, providing additional value and process flexibility.
Plastic, Plastic Additives, Plastic Colorants, Plastic film, Plastic Parts, Plastic Pellets, Plastic Sheet, Plastics, Plastics Blow Molding, Plastics Blown Film, Plastics Equipment
Manufacturer | Gloucester |
Model | 25225R2 |
Serial # | 36736/25 |
Category | Plastics Equipment |
Subcategory | Extruders - Single Screw Extruder |
We pay "Top Dollar" for your idle process equipment! Fill out our form and our buying team will get back to you.
SELL YOUR EQUIPMENTView our entire process equipment inventory online or visit our location for an equipment inspection.
View Inventory