Cosmetics Equipment
Stock No.:
54234009Eaton F3AVFB01033 Single Bag Filter Housing – 3" Ports, 150 PSI
Used Eaton FLOWLINE Single Bag Stainless Steel Filter Housing. Part# F3AVF001133-V-M6. (1) Filter bag. Filter bag size #2 - 7" diameter x 32" long. 3" Inlet / outlets, 3/4" center bottom outlet with valve. Rated 150psi at 250 degrees F. Serial# F-46561. Mounted on Carbon Steel legs.
MFR: Eaton Dynamics
Stock No.:
54234011Industrial Stainless Bag Filter Housing – Eaton FLOWLINE, Size 2
Used Eaton FLOWLINE Single Bag Stainless Steel Filter Housing. Part# F3AVFB01033. (1) Filter bag. Filter bag size #2 - 7" diameter x 32" long. 3" Inlet / outlets, 3/4" center bottom outlet with valve. Rated 150psi at 250 degrees F. Serial# F-12278. Mounted on Carbon Steel legs.
MFR: Eaton Dynamics
Stock No.:
54234012Used Stainless Steel Bag Filter – 7"x32", 3" Inlet/Outlet, Eaton
Used Eaton FLOWLINE Single Bag Stainless Steel Filter Housing. Part# F3AVFB01133-V-M6. (1) Filter bag. Filter bag size #2 - 7" diameter x 32" long. 3" Inlet / outlets, 3/4" center bottom outlet with valve. Rated 150psi at 250 degrees F. Serial# F-46579. Mounted on Carbon Steel legs.
MFR: Eaton Dynamics
Stock No.:
54429001Used Fitzpatrick Fitzmill Model D Hammer Mill on Mobile Frame with 7.5 HP Motor
Used Fitzpatrick Fitzmill, Model D,. Stationary knives, reversible blade assembly with knives. pan fed, variable speed. Mounted on a frame with casters. Driven by a 7.5 hp, 3/60/130-460V, 1740 rpm motor. Approximate OAD 59" x 26" x 58".
MFR: Fitzpatrick
Stock No.:
11059358Used Fitzpatrick DAS06 FitzMill Hammer/Knife Mill – Explosion Proof (XP) Motor
Used- Fitzpatrick DAS06 Fitzmill Hammer/Knife Mill. Stainless Steel; Pan Feed; Driven by 7.5 HP, 230/460V, 1740 rpm Explosion Proof (XP) motor. Serial# 10321. Mounted on stainless steel cart with wheels.
MFR: Fitzpatrick
Stock No.:
409351Used Fitzpatrick Fitz-Mill Model D Hammer Mill with VFD Control
Used Fitzpatrick Fitz-Mill Model D Hammer Mill with VFD Control. 5" x 6" feed throat with top hopper. Approximately 12" diameter cutting chamber. (16) 4" long x 1" wide x 1/4" thick fixed blades. Driven by a 7-1/2hp 3/60/220/440 Volt 1750 rpm motor. Includes control panel with GS2 AC Drive. Mounted on a carbon steel frame.
MFR: Fitzpatrick
Stock No.:
51099003Used Twin Motion 65-Gallon Stainless Steel Vacuum Mixer – Jacketed Kettle
Used- Twin Motion Vacuum Mixer, 65 Gallon, Stainless Steel. Approximate 65 gallon jacketed mixing kettle, 30" diameter x 18" straight side, vacuum cover. Anchor style agitator with sidewall scrappers, driven by 7.5 hp motor. Off set high speed disperser, driven by 10 hp, 3/60/575 volt, 1765 rpm motor. Dual post hydraulic lift with hydraulic pump with vacuum pump driven by 3 hp, 3/60/575 volt, 1760 rpm motor. Floor mounted. No manufactures tag.
MFR: Unknown
Stock No.:
52283011Used Entoleter Centrimil Impact Mill – Model FTM
Used- Entoleter Centrimil Impact Mill, Model FTM. Carbon steel construction. Includes 16" diameter rotor with 3/8" diameter pins and 2-part rotating disc. Includes 8" X 3-1/2" top infeed and 6" diameter center bottom discharge. Driven by 7.5 HP, 220/440V, 3-phase, 60 Hz ,3600 RPM motor. Mounted on a frame. Catalog# B-52900-63, Serial# 5807.
MFR: Entoleter
Stock No.:
53656001Used Fitzpatrick Fitzmill Model DASO6 Stainless Steel Hammer Mill
Used- Fitzpatrick Fitzmill, Model DASO6 Hammer Mill, Stainless Steel. Capacity up to 749 lbs/hr, 1000-4600rpm speed range. Approximately 15" x 15" x 10" deep feed hopper, fed by an approximate 2-1/2" diameter x 58" long screw. Driven by a .33hp 3/60/208-230/460 volt, 1725rpm gear motor, 4.88:1 ratio. Approximately 11-1/4" long x 6" wide x 16" deep milling chamber. (16) Fixed blades, Blunt & knife edge 1" wide x 3-3/4" long x 1/2" thick. Driven by a 7.5hp 3/60/230/460 volt, 1760 rpm motor. Approximately 9-1/2" long x 5-1/2" wide bottom discharge, with screen. Mounted on a stainless steel frame with casters. Serial# 7964.
MFR: Fitzpatrick
Stock No.:
54494001Used Blackmer CO2 Gas Compressor Skid with Glycol Cooling System | CO2 Liquefaction Package
Used- Blackmer Gas Compressor Skid with Glycol Cooling System. Compresses CO2 into liquid form. Skid working capacity of 100 - 150 kg/hr (8.16 cubic meters/hr CO2). Skid contains (2) pumps. (1) Blackmer Model HD082C. 7.5 HP. MAWP 350 psia. 8.44 CFM at max rpm. Serial # 2438140, built 2025. (1) Blackmer Model HDL 322C. 15 HP. MAWP 1000 psia. 9 CFM at max rpm. Serial # 202200251, built 2022. System includes Cybernetik coiled pot condenser.
MFR: Blackmer
Stock No.:
54520001Unused Silverson FMX25 Flashmix High Shear Powder/Liquid Mixer – Stainless Steel In-Line Mixing System
Unused Silverson FMX25 Flashmix high shear powder/liquid mixer. 304 stainless steel chassis, 316L stainless steel wetted surfaces, 2.5" inlet, 2" outlet, 150 psi maximum pressure, liquid flow rate up to 120 gallons/min, powder feed rate up to 40 lbs/min, and 1.4 cubic foot hopper. Driven by a 7.5 HP motor, 3 phase, 60 Hz, 230/460V. Suitable for powder induction, high shear mixing, blending, dispersion, emulsification, and homogenization of food, beverage, dairy, cosmetic, pharmaceutical, chemical, and personal care products.
MFR: Silverson
Stock No.:
54183002Used ProcessAll Model 2000H Vacuum Dryer – 2,000 Liter / 528 Gallon / 70 Cu. Ft.
Used ProcessAll Model 2000H Vacuum Dryer, 2,000 Liter Capacity. 528 Gallon, 70 Cubic foot capacity. Driven by approximate 75hp motor. Jacket rated 75 psi at 375 degrees F, national board# 0034. (4) Side entering choppers, driven by approximate 10hp motors. Center bottom outlet. Serial# 55. No vacuum pump.
MFR: Processall
