Adhesive and Sealant Equipment
Stock No.:
50320024Used Lee Industries, Model 250 LDBT, 316L Stainless Steel Mix Tank
Used- Lee Industries, Model 250 LDBT, 316L Stainless Steel Mix Tank, 250 Liter, Vertical. Approximate 30" diameter x 19" straight side, dished top and bottom. Internal rated 35 psi at 275 degrees F, vacuum internal. Top entering 3-blade turbine agitator, requires motor/drive. Openings top: 14" with cover, (1) 3", (6) 1-1/2". 1-1/2" Center bottom outlet, approximate 6-1/2" discharge height w/o valve, 2-1/8" with valve. Mount on (4) legs with casters. National board# 4381, Serial# B3834A8, Built 1989.
MFR: Lee Ind
Stock No.:
50320066Used Lee Industries, Vertical 316L Stainless Steel Pressure Mix Tank, 250 Liter Capacity
Used- Lee Industries, Vertical 316L Stainless Steel Pressure Mix Tank, 250 Liter Capacity, Model 250 LDBT. Approximate 26" diameter x 25" straight side, dished top and bottom. Internal rated 30 psi at -20 to 300 degrees F, vacuum internal. Top entering dual turbine agitator, requires motor/drive. Openings top: 10" with cover, (1) 3", (6) 1-1/2". 1-1/2" Center bottom outlet, approximate 5-1/2" discharge height. Mount on (4) legs with casters. National Board# 5996, Serial# B9483B3, Built 1994.
MFR: Lee Ind
Stock No.:
50320077Used Lee Vertical Mix Tank, Pressurized, 316L Stainless Steel 250 Liter, Model 250 LDBT
Used- Lee Vertical Mix Tank, Pressurized, 316L Stainless Steel 250 Liter, Model 250 LDBT. Approximate 26" diameter x 25" straight side, dished top and bottom. Internal rated 30 psi at -20 to 300 degrees F, vacuum internal. Top entering dual turbine agitator, requires motor/drive. Openings top: 10" with cover, (1) 3", (6) 1-1/2". 1-1/2" Center bottom outlet, approximate 5-1/2" discharge height. Mount on (4) legs with casters. National Board# 5998, Serial# B9483B5, Built 1994.
MFR: Lee Ind
Stock No.:
52366002Used Industrial Bioreactor, Single Use. Manufactured by Thermo Scientific
Used- Industrial Bioreactor, Single Use. Manufactured by Thermo Scientific, Model HyClone, 250 liter capacity, Stainless Steel. Open top, flat bottom shell. 24" diameter x 36" straight side. Dimple Jacket. Operating Temperature Range: Ambient to 40 +/- 0.1 Degrees C (104+/-0.2 DegreesF). 0.5psi Bag Pressure, Includes AB Series A Drive, Brother 3 phase induction motor, 1/4hp 3/60/208-230/460v 1720rpm, 12.5:1 Ratio. Mounted on Stainless Steel Frame. Serial# H10289-02.
MFR: Thermo Scientific
Stock No.:
53147019Northland Stainless 250 Liter (65 Gallon) Stainless Steel Reactor Vessel.
Used- Northland Stainless 250 Liter (65 Gallon) Stainless Steel Reactor Vessel. Rated for a maximum allowable working pressure (MAWP) of 45 PSI/Full Vacuum at 350 degrees Fahrenheit. Jacket rated for 125 PSI at 350 degrees Fahrenheit. Multiple top inlets, clamps and probes, dished bottom. Forklift ready, mobile on casters. National Board number 3297. Features Lightnin agitator with control panel. Previously used in biotech operation.
MFR: Northland
Stock No.:
53147107Used 2021 FEECO 3-Zone Indirect Rotary Calciner – 2.36 TPH, 66" x 50' 304L Stainless Steel Thermal Processing System
Used FEECO 3-zone indirect rotary calciner system, manufactured in 2021, designed for calcium carbonate processing with an approximate throughput capacity of 2.36 tons per hour (TPH). Features 304L stainless steel construction, 66" diameter x 50' long rotary shell, and reported maximum operating temperature of 900 degrees F. Equipped with natural gas combustion system utilizing (11) burners, 2300 degrees F firebrick refractory, and 2600 degrees F ceramic fiber refractory insulation. Includes Allen-Bradley programmable logic controller (PLC), PanelView human-machine interface (HMI), and Fireye burner management system (BMS) controls. Three-zone indirect heating configuration provides controlled thermal processing. Serial Number D20215011.
MFR: Feeco
Stock No.:
10151576Used GEA Niro Production Minor Stainless Steel Spray Dryer | 35 kg/hr Evaporation | Industrial Pilot / Small Production Unit
Used GEA Niro Production Minor Stainless Steel Spray Dryer | 35 kg/hr Evaporation | Industrial Pilot / Small Production Unit. Approximate evaporation rate of 35 kg/hr (77 Lbs/hr.) depending on product. Niro centrifugal air operated atomiser. Approx. 1700 mm (66.3") dia. x 1000 mm (39") st. Side with a 1100 mm (42.9") conical bottom. Electric heater, blower, cyclone, pipework and additional infrastructure.
MFR: Niro
Stock No.:
11059392Used Mueller 2,500 Liter (660 Gallon) 316L Sanitary Jacketed Reactor/Fermenter – 51.5 PSI / FV, Inconel Jacket
Used- Mueller 2500 Liter (660 Gallon) Sanitary 316L Stainless Steel Reactor/Fermenter/Kettle. Internal Rated 51.5/Full Vacuum @ (-20)/ 300 degrees F. Jacket is Inconel 600 and Rated 150/Full Vacuum @ (-20)/ 300 degrees F. 24" top center manway in addition to other top openings. Has bottom mount for bottom mounted mixer (not installed). 2" Outlet with no valve. 90" OAH. Jacket has been Hydro-tested. National Board# 36308, Serial# 291636-2, built 2003. Last used in sanitary pharmaceutical facility.
MFR: Mueller Corp
Stock No.:
54450001Pharmaceutical Grade 316L Stainless Steel Reactor – 2,500 Liter Jacketed Vessel with Agitation
Used- Precision Stainless 316L Stainless Steel Reactor, 2,500 liter (660 gallon). With agitation. Pharmaceutical grade. Vessel measures 48" diameter X 6'7" high, dish top and bottom. Internally rated for 50 PSI / Full Vacuum at 300 degrees Fahrenheit to minus 20 degrees Fahrenheit. Complete with dimpled jacket, rated for 100 PSI at 300 degrees Fahrenheit to minus 20 degrees Fahrenheit. Includes agitation with 1" diameter x 7' long stainless steel shaft with (3) 16" diameter disc blades with 3" wide paddles. Bottom head includes 2" diameter center outlet. Top head includes 18" manway, 4" diameter agitator port and various openings ranging from 1-1/2" to 6" diameter. Previously used in pharmaceutical operation.
MFR: Precision Stainless
Stock No.:
54450002Used Precision Stainless 2,500 Liter 316L Agitated Reactor | Jacketed Pharmaceutical Pressure Vessel
Used- Precision Stainless 2,500 liter (660 gallon) 316L Stainless Steel Agitated Reactor. Pharmaceutical grade. Vessel measures 48" diameter X 6'7" high, dish top and bottom. Internally rated for 50 PSI / Full Vacuum at 300 degrees Fahrenheit to minus 20 degrees Fahrenheit. Complete with dimpled jacket, rated for 100 PSI at 300 degrees Fahrenheit to minus 20 degrees Fahrenheit. Includes agitation with 1" diameter x 7' long stainless steel shaft with (3) 16" diameter disc blades with 3" wide paddles. Bottom head includes 2" diameter center outlet. Top head includes 18" manway, 4" diameter agitator port and various openings ranging from 1-1/2" to 6" diameter. Previously used in pharmaceutical operation.
MFR: Precision Stainless
Stock No.:
54549001Used 660 Gallon Jacketed Stainless Steel Stainless Steel Tank – 2022 – Milk Pasteurization – 3-Zone Water/Steam Jacket – Agitated
Used 660 gallon 304 stainless steel jacketed tank, built in 2022 and previously used for milk pasteurization. Approximately 5' diameter x 104" high without 2' removable extension legs. Dome top with manway, flat bottom with 3% slope toward front 2" Tri-Clamp outlet, internal baffles, jet CIP, thermowells for chart recorder, and 3-zone water/steam jacket with manifold. Equipped with 2 HP, 3 phase, 220 volt Eurodrive agitator with VFD. Possible applications include milk pasteurization, dairy processing, heating, blending, mixing and holding liquid food products.
MFR: Unknown
Stock No.:
46379011Unused Daekyung Machinery & Engineering Model AJ21S 58X288 6,633 Sq. Ft. 4-Pass Shell & Tube Heat Exchanger
Unused Daekyung Machinery & Engineering Model AJ21S 58X288 horizontal 4-pass shell and tube heat exchanger with approximately 6,633 sq. ft. of heat transfer surface area and carbon steel construction. Shell is rated for 382 psi/full vacuum at -20 to 650 degrees F. Equipped with (1,122) 1" diameter x 24' long carbon steel tubes rated for 297 psi/full vacuum at -20 to 650 degrees F with carbon steel head. Shell-side openings include (2) 20" and (1) 24", with (2) 14" tube-side openings. Unit is saddle mounted. Serial #DK2007-231, National Board #2480, built 2008. Overall dimensions approximately 408"L x 96"W x 130"T with a weight of approximately 103,000 lbs. Documents available. Unit was nitrogen purged by the manufacturer after testing and prior to storage. Possible applications include industrial process heating, cooling, condensing and heat recovery service with suitable process fluids compatible with carbon steel construction.
MFR: Daekyung Machinery & Engineering
