Waste Water Equipment

Used 5,000 Gallon Stainless Steel Tank – Vertical Storage Vessel – 90" Diameter x 170" Tall

Used- 5,000 Gallon Stainless Steel Tank. 90" diameter x 170" tall, vertical, flat top and flat bottom. Previously held calcium chloride.

MFR: Unknown

5,100 Gallon Pfaudler Glass Lined Vertical Chemstore Receiver

Used 5,100 gallon Pfaudler glass lined vertical chemstore receiver, model CV96-5100-90, approximately 96" internal diameter x 143" straight side, 2:1 elliptical dish top and bottom, rated 90 psi and full vacuum at 450 f internal, 9119 glass, 24" center top opening, 24" side bottom manway, on 4 legs, serial# 4174471, national board# 32855, built 2016.

MFR: Pfaudler

Used Industrial Vertical Mix Tank, Lee Industries, 250 Liter Capacity

Used- Industrial Vertical Mix Tank, Lee Industries, 250 Liter Capacity, Model 200 LDBT, 316L Stainless Steel. Approximate 26" diameter x 24" straight side, dished top and bottom. Internal rated 30 psi at -20 to 300 degrees F, vacuum internal. Top entering dual 3-blade turbine agitator, requires motor/drive. Openings top: 10" with cover, (1) 3", (6) 1-1/2". 1-1/2" Center bottom outlet, approximate 5-1/2" discharge height. Mounted on (4) legs with casters. National Board# 8544, Serial# 17569-1-5, Built 2001.

MFR: Lee Ind

Used Lee Model 200 LDBT Pressure Mix Tank, 200 Liter

Used- Lee Model 200 LDBT Pressure Mix Tank, 200 Liter, 316L Stainless Steel, Vertical. Approximate 26" diameter x 24" straight side, dished top and bottom. Internal rated 30 psi at -20 to 300 degrees F, vacuum internal. Top entering dual 3-blade turbine agitator, requires motor/drive. Openings top: 10" with cover, (1) 3", (6) 1-1/2". 1-1/2" Center bottom outlet, approximate 5-1/2" discharge height. Mounted on (4) legs with casters. National Board# , Serial# , Built .

MFR: Lee Ind

Used 316L Stainless Steel Lee Pressure Mix Tank, 200 Liter, Model 200 LDBT

Used- 316L Stainless Steel Lee Pressure Mix Tank, 200 Liter, Model 200 LDBT, Vertical. Approximate 26" diameter x 24" straight side, dished top and bottom. Internal rated 30 psi at -20 to 300 degrees F, vacuum internal. Top entering dual 3-blade turbine agitator, requires motor/drive. Openings top: 10" with cover, (1) 3", (6) 1-1/2". 1-1/2" Center bottom outlet, approximate 5-1/2" discharge height. Mounted on (4) legs with casters. National Board# 8545, Serial# 17569-1-6, Built 2001.

MFR: Lee Ind

Buy Lee 200 LDBT Stainless Steel Pressure Mixing Tank – 30 PSI Rated

Used- Vertical, Industrial Pressure Mix Tank, 200 Liter, Manufactured by Lee Industries Model 200 LDBT. Approximate 26" diameter x 24" straight side, dished top and bottom. Internal rated 30 psi at -20 to 300 degrees F, vacuum internal. Top entering dual 3-blade turbine agitator, requires motor/drive. Openings top: 10" with cover, (1) 3", (6) 1-1/2". 1-1/2" Center bottom outlet, approximate 5-1/2" discharge height. Mounted on (4) legs with casters. National Board# 10370, Serial# 40446-1-6, Built 2005.

MFR: Lee Ind

Used 2018 JBF 530-Gallon 316L Stainless Steel Mix Tank – Dual Turbine Agitation with Bottom Scrapers

Used 2018 JBF Approximately 530-Gallon 316L Stainless Steel Mix Tank Dual Turbine Agitation with Bottom Scrapers. Approximately 54" diameter x 48" straight side. Dished top & bottom. Top center dual 3 blade turbine agitator with bottom scrapers. Driven by a 7.5hp 3/60/230/460v 1768rpm motor through reducer with 43.58:1 ratio. Openings Top: 18" manway with cover, 6" for agitator, (3) 4", 3", (4) 2-1/2", 4" center bottom outlet with 18" discharge height. Serial# 17767, built 2018. Mounted on (4) S/S legs.

Unused CST Carbon Steel Storage Silo – 5,300 Cubic Foot Capacity

Unused CST Carbon Steel Storage Silo 5,300 Cubic Foot Capacity. 13 11" diameter x 45 5" height. Fluidized flow pattern. 60 PCF product compacted bulk density. Cone bottom, flat top. Side-bottom manway. On (4) legs. Built 2021. Reported to be unused.

MFR: CST

Unused 5,300 Cu. Ft. CST Bulk Storage Silo with Fluidized Flow Cone Bottom Design

Unused 5,300 Cu. Ft. CST Bulk Storage Silo with Fluidized Flow Cone Bottom Design. 13 11" diameter x 45 5" height. Fluidized flow pattern. 60 PCF product compacted bulk density. Cone bottom, flat top. Side-bottom manway. On (4) legs. Built 2021. Reported to be unused.

MFR: CST

Used Horizontal 55,500 Gallon Pressure Tank, Manufactured by HUB Technologies

Used- Horizontal 55,500-gallon pressure tank manufactured by HUB Technologies, constructed of 316L stainless steel with dished heads, an end-mounted swing arm manway cover, and supported on (2) saddles. Overall dimensions are approximately 68' long x 14' tall x 13' wide with an empty weight of approximately 33,000 lbs. Shell rated for 25 psi internal pressure and minus 0.75 psi vacuum at 125 degrees F. Suitable for bulk liquid storage, process holding, blending, and surge applications for products such as water, food ingredients, beverages, dairy products, chemicals, pharmaceutical solutions, and other compatible liquids.

MFR: HUB Technologies

Used HUB Technologies 55,500 Gallon Horizontal Pressure Tank

Used- HUB Technologies 55,500-gallon horizontal pressure tank constructed of 316L stainless steel with dished heads, an end-mounted swing arm manway cover, and supported on (2) saddles. Overall dimensions are approximately 68' long x 14' tall x 13' wide with an empty weight of approximately 33,000 lbs. Shell rated for 25 psi internal pressure and minus 0.75 psi vacuum at 125 degrees F. Suitable for bulk liquid storage, process holding, blending, and surge applications for products such as water, food ingredients, beverages, dairy products, chemicals, pharmaceutical solutions, and other compatible liquids.

MFR: HUB Technologies

316L Stainless Steel 55,500 Gallon Pressure Tank

Used- 316L stainless steel 55,500-gallon horizontal pressure tank manufactured by HUB Technologies with dished heads, an end-mounted swing arm manway cover, and supported on (2) saddles. Overall dimensions are approximately 68' long x 14' tall x 13' wide with an empty weight of approximately 33,000 lbs. Shell rated for 25 psi internal pressure and minus 0.75 psi vacuum at 125 degrees F. Suitable for bulk liquid storage, process holding, blending, and surge applications for products such as water, food ingredients, beverages, dairy products, chemicals, pharmaceutical solutions, and other compatible liquids.

MFR: HUB Technologies