Pharmaceutical Equipment

Used SPX Waukesha model CMP stainless steel horizontal colloid mill. Serial number 1000002960246. It has a conical grooved rotor and stator. The inlet and outlet are 2" sanitary threaded. This unit i...

Used-SPX Waukesha model CMP stainless steel horizontal colloid mill. Serial number 1000002960246. It has a conical grooved rotor and stator. The inlet and outlet are 2" sanitary threaded. This unit is all mounted on a stainless steel base. The mill is driven by a 25 hp electric motor. 575 vac 3 ph power required.

MFR: SPX

Used 30 gallon Hoppes chemical reactor, 300 psi internal pressure @ 500 degrees F with 3 HP double helix with sweep agitator and 3HP DC-TENV motor 1750 RPM. 20" diameter x 21" straight side with body...

Used-30 gallon Hoppes chemical reactor, 300 psi internal pressure @ 500 degrees F with 3 HP double helix with sweep agitator and 3HP DC-TENV motor 1750 RPM. 20" diameter x 21" straight side with body flange. Glass Col 9 circuit electric jacket heat with 9 each 1,650 circuits. One 3" 300# RFSO with sight glass, one 3" 300# pad flange, three 2" 300# RFSO flnges, one 1" 3000# coupling, one 1" flush mount bottom ball valve., three 3000# couplings, and three 1/2" 3000# couplings. Tank on a stand. Material 316 stainless steel. ASME "U" stamped. National Board Number1759. Internal welds has #3 polish.

Used Coaire CAS30S24 30 HP Rotary Screw Air Compressor With Schulz Dryer

Used Coaire Model CAS30S24 oil-injected, fixed-speed rotary screw air compressor, Serial #SS030HG187, with Schulz Model ADS 125 non-cycling refrigerated compressed air dryer, Serial #210009427. The Coaire CAS S-Series is a fixed-speed industrial rotary screw compressor line featuring a high-efficiency motor and cooler with direct or gear drive. The CAS030S is rated at 30 HP, with published S-Series capacities ranging from 127 CFM at 100 psi, 124 CFM at 125 psi, and 111 CFM at 150 psi depending on configuration. Included Schulz ADS 125 refrigerated air dryer has a nominal capacity of 125 SCFM, 1-1/4" NPT-F inlet/outlet connections, 115V/1-phase/60 Hz electrical service, and an 88 lb net weight. The dryer is designed to remove moisture from compressed air before it reaches downstream equipment.

MFR: Coair

Used Quadro Comil Model 198 Stainless Steel Conical Mill – 30 HP

Used Quadro Comil Model 198 Stainless Steel Conical Screen Mill With 30 HP Drive, Built 2024. High-capacity industrial milling and particle size reduction system designed for controlled grinding, deagglomeration, delumping and sizing of compatible dry powders, granules and bulk solid materials. Rated for processing capacities up to 16,000 lbs per hour, depending on product characteristics, screen configuration and application. Features 304 stainless steel construction with 316 stainless steel impeller and screens for product processing. Operates at speeds ranging from approximately 200 to 900 RPM, providing flexibility for different material processing requirements and particle size specifications. Driven by a 30 HP WEG motor operating on 230/460 volts, 3-phase, 60 Hz electrical service. Serial #1980262. Manufactured in 2024. Possible applications include dry powder milling, granule sizing, deagglomeration, particle size reduction and processing of compatible pharmaceutical powders, nutraceutical ingredients, food powders, sugar, salt, starch, powdered chemicals, mineral powders, pigments, polymer additives and other suitable dry bulk solids.

MFR: Quadro

Used CMS Heat Transfer 30.3 Sq Ft 304L Stainless Steel Shell and Tube Heat Exchanger, Naphthalene Cooler

Used CMS Heat Transfer Division 30.3 Square Foot 304L Stainless Steel Horizontal Shell And Tube Heat Exchanger With 190 PSI Pressure Rating. Industrial shell and tube heat exchanger designed for liquid-to-liquid heat transfer, process cooling and industrial temperature control applications. Features approximately 30.3 square feet of heat transfer surface area with (12) straight tubes constructed of 304L stainless steel, each measuring 3/4" in diameter. Shell and tubes are constructed of 304L stainless steel and rated for a maximum allowable working pressure of 190 psi and full vacuum at temperatures ranging from -20 F to 400 F. Process connections include (2) 3" shell-side openings, (2) 3" tube-side openings and (4) 3/4" auxiliary nozzles. Originally designed as a naphthalene final cooler, Equipment Tag E-626. Manufactured by CMS Heat Transfer Division, Inc., Bohemia, New York, for Cincinnati Heat Exchangers. Serial #3194.8. National Board #2251. Possible applications include industrial process cooling, naphthalene cooling, chemical processing, liquid-to-liquid heat exchange, solvent cooling, circulating water systems, heat recovery and temperature control of other compatible chemical and industrial process fluids.

Used Trans Food Tech Pre-Mixing System | 300 Gallon Skid-Mounted Mixer

Used Trans Food Tech Pre-Mixing System | 300 Gallon Skid-Mounted Mixer. 41" straight side x 45" diameter tank dimensions, flat bottom. Scrape agitation. Has SPX product pump. With stainless steel electrical control cabinet. Mounted on skid. Built 2018.

MFR: Trans-Tech

Groen Double Motion Inclined Agitation Jacketed Kettle – 300 Gallon, 3 HP Drives (Used)

Used- Groen Double Motion Inclined Agitation Jacketed Kettle 300 Gallon, 3 HP Drives. Vertical, flat open top with covers, Hemispherical bottom. Scrape agitation with "Tree" style secondary mixer. Jacket rated 90 PSI @ 332 Deg.F. Jacket tested good. 3 HP Drives. National Board# 12612, Serial# 75854-2-2. Built 2012

MFR: Groen

Used ROSS CDA-300 Dual Shaft Vacuum Mixer with High Shear Disperser and Sweep Agitator – 300 Gallon Jacketed Mixing System

Used ROSS CDA-300 Dual Shaft Vacuum Mixer with High Shear Disperser and Sweep Agitator 300 Gallon Jacketed Mixing System. 300 Gallon. Unit equipped with Portable Jacketed Tank rated 2 PSI / Full Vacuum @ 300 Deg.F. Jackets rated 50 PSI @ 300 Deg.F.. Approx. 11'1" Overall height. Explosion Proof Motors (XP). (1) 20 HP, 1775 RPM, 208-230/460 volt. (1) 30 HP, 1775 RPM, 208-230/460 volt.

MFR: Ross Industries

Used 300 Cubic Foot Double Ribbon Mixer

Used-300 Cubic Foot Double Ribbon Mixer, ribbons and trough are stainless steel construction. Features carbon steel jacket rated for minus 20 to 250 degrees Fahrenheit at atmospheric pressure. Manufactured by Young Industries. Internal dimensions of mixing trough measure 178" long x 44" wide x 66" deep. Driven by 30 HP motor through heavy duty gearbox. Features end bottom discharge with butterfly valve.

MFR: Young Industries

Used 300 Cu Ft Stainless Steel Ribbon/Paddle Blender – 75 HP

Used- Stainless Steel Ribbon/Paddle Blender. Approximately 300 cubic foot capacity. Approximately 157" L x 66" W x 69" D internal dimensions. Stainless steel hinged top. Center outlet. 55 KW (75 Hp) Siemens motor and Jiangsu Weihung Direct Drive Gear reducer WHK157 61/.36:1 ratio with an approximate output 29 rpm at 60 hz. All stainless steel frame and legs. Includes 75 KVA 480 V primary 240/120LT secondary 3 phase 60 cycle transformer and controls. Built 2024.

IAF 300 Gallon 316 Stainless Steel Agitated Fermentor / Reactor

Used- IAF Fermentor / Reactor, Approximate 300 Gallons, 316 Stainless Steel. Approximate 40" diameter X 55" Straight Side. Dished top and bottom. Internal rated 50 psi at 250 degrees F. 304 Stainless steel jacket rated 80 psi at 300 degrees F. Bottom center entering dual 4-blade impeller agitator. Driven by a 7.5hp, 3/60/230/460 volt, 1755rpm motor through reducer, 5:1 ratio. Openings top: Approximate 14" manway with cover, 4", (2) 3", (3) 1-1/2", 1", (3) 1/2", (2) 3/4", side: 3" with sight glass, (7) 1-1/2", (2) 1/2", 8" for agitator. 1" Bottom outlet, with 20" discharge height. (4) fixed sidewall baffles. Mounted on (4) legs. Serial# D-651, National Board# 396.

Used HSI NT88408 11-Stage Centrifugal Gas Blower – 300 HP Industrial Multi-Stage Blower Package

Used HSI NT88408 11-Stage Centrifugal Gas Blower 300 HP Industrial Multi-Stage Blower Package. S/N 2131006A-5. 10' inlet, 8" outlet, POS.1 vertical. Blower casing is cast iron with heresite P403L coating. Shaft material is 4140 carbon steel. Has labyrinth seals and brass deflector. Impeller is 5011 CAST B.C. at wheel #1 and 5021 CAST RAD. at wheel #2 thru 11. Unit mounted on 25' X 130" skid with 449TS HSI standard motor base. Powered by 300 HP TECO 3/60/460 volt motor.

MFR: HSI