Food and Beverage Equipment

JFD Tube & Coil 282.5 Sq. Ft. Stainless Steel Shell & Tube Heat Exchanger for Industrial Cooling and Heating Applications

JFD Tube & Coil 282.5 Sq. Ft. Stainless Steel Shell & Tube Heat Exchanger for Industrial Cooling and Heating Applications. 12" diameter X 144" face to face length. 304L shell rated 150 PSIG @ -20 to 200F. (122) 0.75" 304L tubes rated 150 PSIG @ -20 to 200F. Unit is single pass with 6" process nozzles and 2.5" service nozzles. Mounted on short carbon steel saddles. NB# 1021, S/N 10215-B. Built 2011, Weight 1700#.

Fabsco Shell & Tube Heat Exchanger, 284 Sq Ft, Duplex Stainless Tubes, Carbon Steel Shell

Used Fabsco Horizontal 284 sq. ft. Shell and Tube Heat Exchanger. Duplex 2205 stainless steel tubes rated 150 psi at 32 to 150 degrees F, 14' Tube length. Carbon steel head. Carbon Steel shell rated 265 psi at 32 to 300 degrees F. 21'' Shell diameter. National Board #11170, Serial #S21-13258-6, built 2023.

MFR: Fabsco

Used Fabsco 284 Sq Ft Horizontal Shell & Tube Heat Exchanger, Duplex 2205 Tubes, 2023

Used Fabsco 284 Square Foot Horizontal Shell and Tube Heat Exchanger. Duplex 2205 stainless steel tubes rated 150 psi at 32 to 150 degrees F, 14' Tube length, 3/4'' tube diameter. 21'' Shell diameter. Carbon steel head. Carbon Steel shell rated 265 psi at 32 to 300 degrees F. National Board #11171, Serial #S21-13258-7, built 2023.

MFR: Fabsco

Used Heat Transfer Systems U-Tube Shell & Tube Heat Exchanger – 2,858 Sq. Ft., Carbon Steel

Used- Heat Transfer Systems U-Tube Shell and Tube Heat Exchanger, Approximately 2858 Square Feet, Horizontal. Carbon steel shell rated 80 psi at -20 to 250 degrees F. (280) 3/4" Diameter x 26' long carbon steel tubes rated 100 psi at -20 to 150 degrees F. Carbon steel tube sheet and head. Openings: shell 4", 14"; openings for tubes (2) 12". Mounted on carbon steel saddles. Serial # 12915-2, National Board #1802.

MFR: Heat Inc

Xylem Shell and Tube Heat Exchanger

Unused- Xylem Shell and Tube Heat Exchanger. 26.6 square meter (286.3 square feet) effective surface area, Horizontal. Carbon-steel shell. Shell side: 171 PSI at -20 to 500 degrees F.. Tube side 221 PSI at -20 to 500 degrees F. Copper-Nickel (CuNi 90/10) tubes. NB #316316. Built 2019. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

Ellett Industries Shell & Tube Heat Exchanger. Used

Used- Ellett Industries Shell & Tube Heat Exchanger, 2890 Square Foot, Vertical. Single pass. (1125) Zirconium (SB-523) 3/4" diameter x 13' 2" long tubes rated 50 psi at 400 degrees F. 304 Stainless steel shell rated 75 psi at 100 degrees F. Side lug mounted. Buddle: National board # 659. Serial # 43624. Built 2006. Shell & heads: National board # 49114. Serial # 4901035. Built 1989.

MFR: Ellet Mfg

Used Alfa Laval / Sharples Super-D-Canter DS-706 Centrifuge – 300 HP, 317 Stainless Steel

Used- Alfa Laval / Sharples Super-D-Canter DS-706 Centrifuge, 317 Stainless steel construction on product contact areas, maximum bowl speed 2600 rpm, 10" single lead conveyor with STC wear protection tiles, casing with stainless top cover, gearbox (95:1 ratio), air cooled lube system, 300 hp drive motor and sub-base with VFD, 3/60/460 volt, 1780 rpm, safety guards, feed pipe, backdrive stand and 75 hp motor, operations and control panels.

MFR: Alfa Laval

Industrial Stainless Steel Plow Mixer/Dryer – Used Hagen & Rinau HSM 800

Used- Hagen & Rinau Unimix Plow Mixer/Dryer, Type HSM 800. Material of construction is 304 stainless steel (1.4541). 34" (900 mm) diameter x 51" (1300 mm) straight side mixing/drying chamber. Total capacity is 29 cubic feet (822 liter), net working capacity is 8.83-20.3 cubic feet (250-575 liter). Jacketed, inside rated for 45 psi (3 bar) at 212 deg F (100 deg C). 2 end scrapers and 4 Becker plows welded on a shaft. One (1) removable end. (1) 9.75" x 23.4" (250 mm x 600 mm) outlet. Driven via a gearbox by a 195 hp/130 kw, 1280 rpm, 400 volt/50 cycle/3 ph motor. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Hagen & Rinau-Unimix

Used Fabsco 299 Sq Ft Shell & Tube Heat Exchanger, Carbon Steel, 405 PSI, 2023

Used Fabsco 299 sq. ft. Shell and Tube Heat Exchanger. Carbon steel tubes rated 405 psi at 32 to 330 degrees F. 13' Tube length. Carbon steel head. Carbon steel shell rated 405 psi at 5 to 300 degrees F. 15'' Shell diameter. National Board # 11283, Serial # S21-13258-10, built 2023.

MFR: Fabsco

Fabsco Shell and Tube Heat Exchanger, 299 Square Foot

Used Fabsco Shell and Tube Heat Exchanger, 299 Square Foot. Carbon steel tubes rated 405 psi at 32 to 330 degrees F. 13' Tube length. Carbon steel head. Carbon steel shell rated 405 psi at 5 to 300 degrees F. 15'' Shell diameter. National Board # 11282, Serial # S21-13258-9, built 2023.

MFR: Fabsco

Used 100mm Buss Kneader System with Hot Feed Extruder & Gala Underwater Pelletizer | 200 HP | 2,000 lb/hr PVC Line

Used 100mm Buss Kneader System with Hot Feed Extruder & Gala Underwater Pelletizer | 200 HP | 2,000 lb/hr PVC Line, includes 5.94/1 gearbox, jacketed barrel and clam shell barrel opening. Includes operator control panel. Kneader will discharge into approximately 5.5" o.d. (140mm) hot feed extruder with 7/1 L/D, jacketed barrel driven by 75 hp motor. Includes Used #6 Gala underwater pelletizer with 12.1 ECLNBF Gtala spin dryer. Extra new die plates available at additional cost. The Buss line was last run on flexible PVC at 2000 lb/hr in August 2022.

MFR: Buss

Used Welex HS 3.0 40D SV Single Screw Extruder | 3" Screw | 40:1 L/D | 1520 RPM | 550 HP VFD Drive | Vented Barrel

Used Welex HS 3.0 40D SV Single Screw Extruder | 3" Screw | 40:1 L/D | 1520 RPM | 550 HP VFD Drive | Vented Barrel. 1520 RPM max. screw speed. Electric heated, air cooled barrel. Vented barrel. 57" barrel center line. 3" x 9" oversized water cooled feed throat. Touch screen operator control. Direct driven by a 412kW (approx. 550 HP) variable frequency motor, 3/60/480V. Serial# 8454. Built 2009.

MFR: Welex