Cosmetics Equipment

Used Glatt 78L Stainless Steel Tote – 20.6 Gallon, 2.7 Cubic Feet

Used- Glatt Tote, 78 Liter (20.6 Gallon), 2.7 Cubic Feet, Stainless Steel. No valve or cover.

MFR: Glatt

Used Patterson-Kelley 20 Cu. Ft. Stainless Steel V-Blender – 5 HP Drive with 2 HP Intensifier Bar

Used Patterson-Kelley 20 Cu. Ft. Stainless Steel V-Blender 5 HP Drive with 2 HP Intensifier Bar. Machine rated 65# per cubic foot. On stand with 5 HP, 230/460 volt drive motor and intensifier bar 2 HP motor. (2) 18" loading covers with (1) 8" discharge port with air operated butterfly valve. Last used on starch.

MFR: Patterson Kelley

Used Toshin TDS75-100MF Double Arm Dispersion Mixer – 75L Capacity, 100 HP, Stainless Steel. Chewing Gum.

Used- Toshin Double Arm Dispersion Mixer, Model TDS75-100MF, Stainless Steel. 75 Liter (19.8 gallon) working capacity, 150 liter (39.6 gallon) total. Jacketed bowl approximate 22" left to right x 23" front to back x approximately 20" deep rated 213 maximum psi at 302 degrees F. Cored masticator blades, front rotor 27 rpm, rear rotor 23 rpm, geared one end, top air operated pressure cap, air operated dust hood, motorized bowl screw tilt with a 2.2kw motor. Mixer driven by a 75kw (100hp), 3/60/480 volt, 1760 rpm motor thru a reducer no ratio. Includes an operator panel and control panel. Mounted on a base. Serial # 916. For Chewing Gum.

MFR: Toshin

Used Toshin Co. Double Arm Mixer / Hybrid Kneader - Dispersion Mixer – 75L, 100 HP, Stainless Steel. Chewing Gum.

Used- Toshin Model TDS75-100MF Double Arm Dispersion Mixer, Stainless Steel. 75 Liter (19.8 gallon) working capacity, 150 liter (39.6 gallon) total. Jacketed bowl approximate 22" left to right x 23" front to back x approximately 20" deep rated 213 maximum psi at 302 degrees F. Cored masticator blades, front 27 rpm, rear 23 rpm, geared one end, top air operated pressure cap, air operated dust hood, motorized bowl screw tilt with a 2.2kw motor. Mixer driven by a 75 kw (100 hp), 3/60/480 volt, 1760 rpm motor thru a reducer ratio 20.272 to 1. Includes an operator panel and control panel. Mounted on a base. Serial # 1298. For Chewing Gum.

MFR: Toshin

Used CB Mills Batchranger Disperser – 20 HP, Air Tilt, Hoist Mounted

Used- CB Mills Batchranger Stand-Alone Hoist Mounted Disperser, Model FDD-611. Air operated tilt. Enclosed shear grid/stator and high pressure impeller. Driven by a 20hp, 3/60/230/460 volt, 1755 rpm xp motor. Mounted on painted carbon steel hoist. Serial# 2985-0000.

Used Lowe Industries C-20 Heavy-Duty 316 Stainless Steel Ribbon Blender – 20 Cubic Foot Cosmetic & Industrial Blender

Used Lowe Industries C-20 Heavy-Duty 316 Stainless Steel Ribbon Blender 20 Cubic Foot Cosmetic & Industrial Blender. Trough measures 60" long X 27' wide X 27" deep. Rotation is CCW. Serial# 787. Center discharge. Mounted on stainless steel structure with side catwalk. Built in 1992. Previously used in cosmetics.

MFR: Lowe

Used 20" Diameter x 15' Long Inclined Auger Conveyor – 3 HP Motor | 480V | Heavy-Duty Industrial Screw Conveyor

Used- 20" Diameter x 15' Long Inclined Auger Conveyor. Driven by a 3 HP, 3/60/480V, 1735 RPM motor.

Used Yargus Layco Rotary Drum Blender System – 8 Ton Capacity

Used- Yargus Layco Rotary Drum Blender System. 8 ton capacity, 60 lbs per cubic foot; 304 stainless steel construction; Stainless steel drum head; (2) 15,000 lb. trunnion rollers. 20HP electric motor, Nord gearbox. With 304 stainless steel weigh hopper (approx. 144" x 95" ), 12' L x 2' W transfer conveyor, 12' L x 2' W loadout conveyor, and control panel Built 2018. Previously used to blend aggregates.

Used IKA Works High Shear Mixer / Homogenizer – Stainless Steel, 20 HP

Used- IKA Works Mixer/Homogenizer Model DR 2000/10. Approximately 7-1/2" diameter x 6" deep chamber. Missing internals. Top bolt on cover with 2" diameter tri-clamp opening, 2" side bottom outlet. Driven by a 20hp 3/60/575V, 3537 rpm motor. Mounted Aerni Pressure Vessel, Model AR 139 rated for 26bar (377psi) at -70 to 200 degrees C (-94 to 392 degrees F). No Manufacturers tag, frame mounted.

MFR: IKA Works

Used Quincy QCD-20 Rotary Screw Air Compressor System with 120 Gallon Tank, Dryer & Oil Water Separator

Used Quincy QCD-20 Rotary Screw Air Compressor System with 120 Gallon Tank, Dryer & Oil Water Separator. Rated 125 psig. 97.2 CFM. 20 HP, 3/60/460V. With SPVG 120 gallon vertical air receiver Tank; Mikropor Model MK-US-125 Digital 125 SCFM air dryer; and Clean Resources Model IDC Pak Series oil water separator. 32,211 hours. Built 2010.

MFR: Quincy

Used Gifford-Wood W750H High Shear Colloid Mill – 20 HP, 3,500 RPM Cart-Mounted Processing System

Used- Gifford-Wood High Shear Colloid Mill, Model W750H. Powered by a 20 HP, 3500 RPM, 3/60/230-460V Pacemaker motor. With control panel. Mounted on cart.

Used Patterson-Kelley 20 cuft stainless steel twin shell "V" blender. The blender is chain and sprocket driven by 3 hp electric motor. The blender is designed to handle material density of up to 10...

Used-Patterson-Kelley 20 cuft stainless steel twin shell "V" blender. The blender is chain and sprocket driven by 3 hp electric motor. The blender is designed to handle material density of up to 105 lbs/cuft. The two shells measure about 31" diameter x 53" long. This unit is set up for an intensifier bar belt driven by a 5 hp motor. THE BAR ITSELF IS MISSING. There is a 7.5" discharge with a pneumatically operated butterfly valve. Overall dimensions with carbon steel stand are 116" wide x 68" deep x 112" tall. Serial # 234005. This unit comes with fence panels for a safety and a platform with a stairway. The platform is 103" wide x 83" deep x 48.5" tall to the floor. OAD of the platform with stairway are 103" w x 112" long x 91" h. Requires 230/460 vac 3 ph electrial supply. Good condition.

MFR: Patterson Kelley