Contract Pharmaceutical Equipment
Stock No.:
54280001Used Buflovak Atmospheric Double Drum Dryer | Model 6" x 8" ADDD | Pilot & R&D D
Used Buflovak Atmospheric Double Drum Dryer, Model 6" x 8" ADDD. 2 sq/ft Total drying surface area. Approximate 6" diameter x 8" face cored drum, rated 140-160 psig. Driven by a 1/2hp, 3/60/208-230/460 volt, 1725rpm motor through reducer 41.58:1 ratio. Blador VS drive. The dryer features twin chrome-plated drying drums with independent drum gap adjustment, stainless steel frame and safety guards, product feed trough with feed manifold, and doctor blade assembly. Compact unit is designed for drying slurries, purees, pastes, and other pumpable materials into flakes or powders and is well suited for R&D, product development, and small-scale production. Mounted on stainless steel frame. Job No. P1-00972, Serial# 2013-04, built 2013.
MFR: Buflovak
Stock No.:
51487002Industrial Used Belt O Matic Belt Dryer Model 320B – High-Efficiency Continuous Drying
Used Belt O Matic Belt Dryer, Model 320B. 6 5" wide by 245" long; 3 phase/480 Volt/40 Amps;LP/natural gas; 5-7 PSI pressure Range; 1,000,000 BTU rating; 10,000 maximum CFM; 7.5 HP fan, maximum drying air temperature 250 degrees F. Built 2017. Last ran wet coffee grounds.
MFR: Belt-O-Matic
Stock No.:
10755166Used Sweco LX60C168 60” Low Profile Screener – Single Deck, 3D Motion, Spare Motor & Springs, Built 2024
Used- Sweco Model LX60C168 60" Single Deck Low Profile Screener. The Sweco LX Low Profile Flow-Thru Separator allows for high capacity wet or dry scalping in a compact, low headroom design. Dual .69 hp motors mounted on opposite sides of the LX allow unrestricted flow of material and create the 3-D motion that allows oversize material full discharge, keeping the screen clear for maximum product flow. Low headroom requirements (as little as 15 inches) and straight flow design, allow the LX to fit easily into existing product lines without reworking the entire system. 12" center bottom outlet. Includes used spare motor, and six (6) spare springs. Unit is mounted on a 27" high base. No lid. " screen installed. 230-460/3/60-volt input. Serial# 554445-A-09/24, built 2024.
MFR: Sweco
Stock No.:
47147033Used Lee 60 Gallon Stainless Steel Steam Jacketed Kettle Model 60D7S
Used Lee 60 Gallon Stainless Steel Cooking & Mixing Kettle, Model # 60D7S, Serial # 32675-1, built in 2004. Stainless steel 60 gallon kettle equipped with a single-action scraped-surface agitator with scrapers missing. Steam jacket is rated for 90 psi at temperatures up to 332 F, National Board number 9758. Kettle has a 1.5" diameter outlet with pneumatic discharge valve and is driven by a 1 HP, 3 phase, 60 cycle, 230/460 volt motor. Suitable for cooking, heating and mixing applications involving products that can be processed in a steam-jacketed, agitated kettle.
MFR: Lee Ind
Stock No.:
47147036Used Groen RA-60 60 Gallon Stainless Steel Jacketed Cooking Kettle with Agitator
Used Groen 60 gallon stainless steel jacketed cooking and mixing kettle, Model # RA-60, Serial # 03588, National Board number 139462, equipped with a single-action scraped-surface agitator with scrapers missing, 125 psi steam jacket rated up to 353 F, 1.5" diameter outlet, and 1.5 HP, 3-phase, 60-cycle, 230/460-volt motor with final agitation speed of 34 RPM. Suitable for batch cooking, heating, blending, and mixing applications and products requiring low-speed scraped-surface agitation.
MFR: Groen
Stock No.:
53529001Used Sweco 60” Vibro-Energy Separator – Stainless Steel, Model US60S88
Used- Sweco 60" diameter Vibro-Energy Separator, Model US60S88, Stainless Steel. Single deck, single separation. Missing top frame. Driven by 2.5hp 3/60/230/460 volt, 1160rpm motor. Mounted on stainless steel frame with casters. Serial# US60-387-03.
MFR: Sweco
Stock No.:
53566001Used Hydro-Pac LX Carbon Dioxide Compressor, Model C02.2-60-1975LX-CO2. Single stage; 400 to 2176 psi suction pressure; 2176 psi max. discharge pressure; Capacity @ 600 psig, 55 degree F inlet: 127 scfm; Capacity @ 870 psig, 55 degree F inlet: 989 scfm; 15 gpm (minimum) cooling water requirements at 60-80 degrees F. 60 HP, 3/60/230/460V motor, 120V control. Built 2020.
Used- Hydro-Pac LX Carbon Dioxide Compressor, Model C02.2-60-1975LX-CO2. Single stage; 400 to 2176 psi suction pressure; 2176 psi max. discharge pressure; Capacity @ 600 psig, 55 degree F inlet: 127 scfm; Capacity @ 870 psig, 55 degree F inlet: 989 scfm; 15 gpm (minimum) cooling water requirements at 60-80 degrees F. 60 HP, 3/60/230/460V motor, 120V control. Built 2020.
Stock No.:
53756001Used Atlas Copco Model GA45 Industrial Rotary Screw Air Compressor | 60 HP
Used- Atlas Copco Rotary Screw Air Compressor, Model GA45. Liquid cooled; rated 294 cfm at 107 psi; 107 psig max. discharge pressure; Elektronikon control panel. Driven by a 60 hp, 3/60/230/460 volt, 3550 rpm motor. 17537 load hours.
MFR: Atlas Copco
Stock No.:
54091001Used Macon MA60S88-DP Vibratory Separator | 60" SS Screens | Wet/Dry Processing
Used Macon Model MA60S88-1DP 60" diameter stainless steel vibratory screener designed for wet or dry processing. Unit features a single-deck, two-separation configuration and is driven by a 2.5 horsepower motor rated for 230/460 volts, 3 phase, 60 hertz, and 1,160 revolutions per minute. The screener is mounted on a painted carbon steel base and has interchangeable parts with Sweco and other brands. Serial number 999294-11-11. Possible applications include wet or dry screening, classifying, scalping, and separating suitable powders, granules, slurries, and other process materials.
MFR: Macon
