Contract Pharmaceutical Equipment

Used EPCON MVR Falling Film Vacuum Evaporator – 4,200 kg/h | AISI 316 | 1-Pass | Whey Concentration | Upgradeable

Used- 1-pass MVR falling film vacuum evaporator. This EPCON evaporator was designed to concentrate whey products from 5% to an impressive 20% total solids in just one pass. This falling film evaporator plant operates seamlessly with a Mechanical Vapour Recompression (MVR) unit, which utilizes electricity to recompress evaporated water, transforming it into reusable steam. The water evaporation capacity ranges between 4,000 and 4,200 kg/hour, dependent on product parameters and boiling temperature. Equipped with 745 pipes measuring ?38 x 6 meters, in addition to the MVR characteristic and boiling temperature considerations, this EPCON evaporator boasts an impressive water evaporation capacity of approximately 4,200 kg/hour. For your convenience, the complete EPCON unit will be delivered with its original technical documentation. The installation footprint measures around 8 x 8 meters, standing at approximately 8 meters in height. This versatile EPCON evaporator has the potential for a redesign/rebuild into a 2-pass evaporator, amplifying water evaporation capacity by approximately 25%. Our expert evaporator designer is ready to provide tailored calculations and drawings to optimize this unit for your specific application. Materials in contact with product are made of acidproof stainless steel, AISI316. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible

Pieralisi FP 600-2RS Decanter Centrifuge. Used

Used- Pieralisi FP 600-2RS Decanter Centrifuge. AISI 304 Stainless Steel construction (product contact areas). Maximum bowl speed 4100 rpm, single row cake discharge ports, conveyor, casing, gearbox, Approx 15 Kw/22.5 HP 2 HP 380/3/50 ABB drive motor. On 4 legs. Reported rebuild. Previous used in a WWT application. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible

MFR: Pieralisi

Used Pieralisi Hercules 470/3 Decanter Centrifuge – 4000 RPM, SS, WWT Application, Complete System

Used- Pieralisi Hercules 470/3 Decanter Centrifuge. Stainless Steel construction (product contact areas). Maximum bowl speed 4000 RPM, single row cake discharge ports, conveyor, casing, gearbox, 37Kw 380/3/50 drive main motor. Roto-variator motor 15 Kw, 380/50/3, On 4 legs. Control panel, pumps, sensors, valves, piping and additional infrastructure. Previously used in a WWT application. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible

MFR: Pieralisi

Used – Alfa Laval MRNX 414B-31G Solid Bowl Decanter Centrifuge – 316 SS, Food-Grade

Used- Alfa Laval MRNX 414B-31G Solid Bowl Decanter Centrifuge. 316 Stainless Steel construction (product contact areas). Maximum bowl speed 3700 RPM. Single row of lined cake discharge ports with wear liners, liquid plate dams, base, stainless steel casing, gearbox, Approx. an 11 kW (14.7 HP), 3/50/400-Volt main drive motor. Back drive. Frame mounted on (4) legs. Sanitary design with CIP cleaning. Previously used in a food application. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible

MFR: Alfa Laval

Used Hiller DP 45-422 Solid Bowl Decanter Centrifuge | 2304 Duplex SS | Wastewater Dewatering

Used Hiller DP 45-422 Solid Bowl Decanter Centrifuge | 2304 Duplex SS | Wastewater Dewatering. Alloy 2304 (1.4362) on product contact parts. Maximum bowl speed 3800 rpm. Working bowl speed 3500 rpm. Single lead conveyor with single row lined cake discharge ports with ware liners. Approximate 30 KW (45 hp) 3/50/380 Volt main drive motor, frame/casing and additional infrastructure. On 4 legs. Control panel. Previously used in a Wastewater Treatment Application. New year 2012. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

Hiller DP 45-422 Industrial Decanter Centrifuge with Duplex Stainless Bowl | Sludge Dewatering

Hiller DP 45-422 Industrial Decanter Centrifuge with Duplex Stainless Bowl | Sludge Dewatering. Alloy 2304 (1.4362) on product contact parts. Maximum bowl speed 3800 rpm. Working bowl speed 3500 rpm. Single lead conveyor with single row lined cake discharge ports with ware liners. Approximate 30 KW (45 hp) 3/50/380 Volt main drive motor, frame/casing and additional infrastructure. On 4 legs. Control panel. Previously used in a Wastewater Treatment Application. New year 2012. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

Used GEA Westfalia Fishmaster CF 5000 Decanter Centrifuge | Fish Oil & Protein Processing

Used GEA Westfalia Fishmaster CF 5000 Decanter Centrifuge | Fish Oil & Protein Processing. Alloy 2304 (1.4462) stainless steel (product contact areas). Max bowl speed 4000 rpm, 2 phase separation (liquid/solids) design, single row of lined cake solids discharge ports, base, casing, gearbox, back drive and control panel. Previously used in a Fish oil application. New year 2015. Reposted rebuild. Our freight specialists can assist you with door-to-door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: GEA Westfalia

Used Alfa Laval DSNX 4850 Decanter Centrifuge. Stainless steel (product contact areas). Max bowl speed 3650 rpm, 2 phase separation (liquid/solids) design. Bowl dia: 480/263 mm (18.7/10.2), Bowl beach angle: 10°, 250 mm (10") pitch, conveyor flights are protected with around 200 tungsten carbide tiles, single row of 360 deg lined cake solids discharge ports, base, casing, gearbox 6 kNm, back drive 1:169 and Alfa Laval control panel with ABC controller. Previously used in a Medical WWT applicati

Used Alfa Laval DSNX 4850 Decanter Centrifuge for Sludge Dewatering | Medical & Industrial WWT. Stainless steel (product contact areas). Max bowl speed 3650 rpm, 2 phase separation (liquid/solids) design. Bowl dia: 480/263 mm (18.7/10.2), Bowl beach angle: 10, 250 mm (10") pitch, conveyor flights are protected with around 200 tungsten carbide tiles, single row of 360 deg lined cake solids discharge ports, base, casing, gearbox 6 kNm, back drive 1:169 and Alfa Laval control panel with ABC controller. Previously used in a Medical WWT application for sludge dewatering.

MFR: Alfa Laval

Used Alfa Laval NX 438B-31G Solid Bowl Decanter Centrifuge – 316 SS High-Speed Separation System

Used- Alfa Laval NX 438B-31G Solid Bowl Decanter Centrifuge. 316 Stainless Steel construction (product contact areas). Maximum bowl speed 3650 RPM. 360 deg single row of lined cake discharge ports with wear liners, liquid plate dams, base, stainless steel casing, gearbox, 55 kW (82.5 HP), 3/50/400-Volt main drive motor. 3.5 KN gearbox. Hydraulic back drive. Frame mounted on (4) legs. Control panel. Previously used in a fishmeal/oil application. Our Freight specialists can assist with any customs documentation to insure a smooth transition.

MFR: Alfa Laval

Used Minox BSM 200 “E” 3 Mz 2,000-Liter Stainless Steel Plow Mixer – Triple Cutting Heads

Used- Minox Plow Mixer, Model BSM 200 "E" 3 Mz. Stainless steel construction and 2,000-liter capacity. Unit features a center bottom product outlet and is driven by a 26 kW, 50 Hz motor. Mixer is equipped with (3) cutting heads and includes a platform and feed hopper. Distance from floor to outlet is approximately 1 meter. Overall footprint measures approximately 5 m x 2.80 m x 6 m high. Possible applications include industrial mixing and blending of powders, granules, and other suitable dry or bulk products.

Used MWM 2,000-Liter Stainless Steel Plow Mixer – 45 kW with Dual Cutting Heads, Hopper & Platform

Used- MWM 2,000-Liter Plow Mixer. Stainless steel construction complete with feed hopper and platform. Mixer is equipped with (2) cutting heads. Features a center bottom outlet, approximately 1.4 m from the floor. Driven by a 45kW, 50Hz motor. Overall footprint measures 5 m x 3.2 m x 7 m tall.

MFR: MWM

Used Lodige FKM 3000 D 3,000-Liter Stainless Steel Plow Mixer – Jacketed Heating & Cooling Design

Used- Lodige Plow Mixer, Model FKM 3000 D. 3,000-liter capacity and stainless steel interior. Mixer features double-wall construction for heating or cooling and has (3) openings for knife heads; knife heads are not included. Unit is equipped with cleaning flaps and includes a control cabinet and circuit diagram. Built in 2010. Possible applications include industrial mixing and blending processes requiring heating or cooling for suitable powders, granules, and other bulk products.

MFR: Lodige