Cannabis Industry Equipment

Used 7,000 Gallon Alloy Fabricators 316L Stainless Steel Vertical Storage Tank

Used- 7,000 Gallon Alloy Fabricators 316L Stainless Steel Vertical Tank. 10' diameter x 12' tall. Side manway. Built 1995.

MFR: Alloy Fab

Used Jiangsu Lantai Machinery Co. Stainless Steel Double Ribbon Blender – Model LTLW-20, 706 Cu. Ft., 120 HP

Used- Jiangsu Lantai Machinery Co. Stainless Steel Double Ribbon Blender, Model LTLW-20. 20 cubic meter (approx. 706 cubic feet) total volume; 304 Stainless steel contact parts; 20-50 minute mixing time; Pneumatic Flashboard Discharge; Approximate 200mm (7.87") diameter shaft driven by an approximate 90 kw (120 HP) 3/60/575 Volt Siemens Motor; Includes stainless steel screw conveyor and hopper. Built 2020. This ribbon blender is generally used for mixing viscous or agglomerative powder particles

Used Heat Transfer Systems Tube Reboiler/Heat Exchanger – 7062 Sq Ft, 304L SS, Vertical/Horizontal

Used- Heat Transfer Systems Inc. Stainless Steel Tube Reboiler/Heat Exchanger. 7062 square foot surface area; 57" diameter; Carbon steel steam shell; 304L stainless steel tubes and tube sheets; 16' shell length; 23'8" overall length; Vertical orientation (can be used horizontal); 75 PSI/FV @ 320F Shell Side (MAWP); 60 PSI/FV @ 320F Tube Side (MAWP); 31 Deg F/75 PSI Shell Side (MDMT); 31 Deg F/60 PSI Tube Side (MDMT); 15 PSI/FV @ 320F Shell Side (MAWP-External); 15 PSI/FV @ 320F Tube Side (MAWP-External). BEM exchanger configuration. S/N #13138-5. NB #2068. Built 2011. Unit is from ethanol distillation column system.

MFR: Heat Transfer Systems

Used Glatt GSX-1500-BD Industrial Tablet & Film Coater – 1800mm Diameter

Used-Glatt GSX-1500-BD Coater, diameter 1800mm, coater length 2200mm, door opening diameter 550mm, cutler-hammer model E710 touch screen control, with control panel, valves, pumps, motors and extraction unit. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Glatt

Unused Hughes-Anderson 2-Pass Shell & Tube Heat Exchanger – 7,110 Sq. Ft., 600 PSI

Unused- Hughes-Anderson 2 Pass Shell & Tube Heat Exchanger, 7,110 Square Feet, Type AET, Size 52" x 28', Horizontal. Carbon steel shell rated 600 psi/Full Vacuum at -50 to 400 degreesF. (989) 1" Diameter x 28 long carbon steel tubes rated -50 to 500 psi/Full Vacuum at 400 degrees F. Openings shell (2) 10", openings for tubes (2) 14". Mounted on saddles. Serial# 9683-1, National Board# 6006, built 2008.

MFR: Hughes Anderson

Industrial Unused Hughes-Anderson 2-Pass Shell & Tube Heat Exchanger – 7,110 Sq. Ft. | Horizontal

Unused- Hughes-Anderson 2 Pass 7,110 Square Feet, Type AET Shell & Tube Heat Exchanger, Size 52" x 28'. Horizontal. Carbon steel shell rated 600 psi/Full Vacuum at -50 to 400 degreesF. (989) 1" Diameter x 28 long carbon steel tubes rated -50 to 500 psi/Full Vacuum at 400 degrees F. Openings shell (2) 10", openings for tubes (2) 14". Mounted on saddles. Serial# 9683-2, National Board# 6007, built 2008.

MFR: Hughes Anderson

2800L (740 gal) Mueller "f" tank. 316 stainless

Used- 2800L (740 gal) Mueller "f" tank. 316 stainless inner shell, Dual 304 jackets, 2" insulation, 304 stainless cladding. Tank MAWP - 60psi @ 350F Jacket MAW - 100psi @ 350F The tank bottom actuated valve was updated/replaced by mueller in 1993 with Saunders 70v61-315-p4 tbv Have drawings from mueller. Includes lightnin vektor VKS37 agitator. Serial# R0037042201. Does not have motor.

MFR: Mueller Corp

Sistersville Tank Works Incorporated Shell and Tube Heat Exchanger

Used- Sistersville Tank Works Incorporated Shell and Tube Heat Exchanger. Approximately 745 square foot 316L stainless steel 20" diameter X 20' face to face length. 316L SS shell side rated 150 PSI @ 20 to 320 degrees F. (190) 3/4" 316L SS tubes rated 150 PSI @ 20 to 305 degrees F. 3" Process nozzles with 1" vent and drain. 3" service nozzles. NB# 3879, S/N: 06- 290. Built 2007. Weight 6150#. Missing one head

MFR: Sisterville Tank Works

Used Lee 75-Gallon Tilt-Back Dual Motion Agitator – 316 SS, XP Motor, Industrial Mixer

Used- Lee Floor Mounted 75 Gallon Dual Motion Tilt Back Agitator Assembly, Model 9M, 316 Stainless Steel. Approximate 30" wide anchor style agitator. Inner bars 11" x 1.5" wide x 5/16" thick. Outer bars 11.5" x 1.5" x 5/16" thick. Driven by a 2hp, 3/60/230/460 volt, 1725 rpm XP motor, thru dodge gearbox. Has tilt mounted stainless steel frame. Serial# 17378-2.

MFR: Lee Ind

Used Amherst Approximately 75 Gallon 304L Stainless Steel Agitated Pressure Tank

Used- Amherst Stainless Steel Agitated Pressure Tank, Approximately 75 Gallon, 304L Stainless Steel, Vertical. Approximate 30" diameter x 22" straight side. Dished top and bottom heads. Internal rated 130 psi at -20 to 150 degrees F. Top entering 3-blade prop agitator, driven by a 0.5 HP, 3/60/230/460 volt, 1725 rpm gear motor, 5 to 1 ratio. Openings top: 8" handhole with cover, (2) 2", 1". 3" Center bottom outlet with manual ball valve. Mounted on (4) legs with casters. National Board# 1513, Serial# 1748, Built 2021. Previously used for raw materials used in the production of molded fiber products.

Amherst 75 Gallon Agitated Stainless Steel Pressure Tank

Used- Amherst Stainless Steel Pressure Tank, Approximately 75 Gallon, 304L Stainless Steel, Vertical. Approximate 30" diameter x 22" straight side. Dished top and bottom heads. Internal rated 130 psi at -20 to 150 degrees F. Top entering 3-blade prop agitator, driven by 0.5HP, 3/60/230/460 volt, 1725 rpm gear motor, 5 to 1 ratio. Openings top: 8" handhole with cover, (2) 2", 1/2". Center bottom outlet with manual ball valve. (1) 500 PSI Basket Strainer and Bag Filter. Control panel. Mounted on (4) legs with casters. National Board# 1472, Serial# 1707, Built 2021. Previously used for raw materials used in the production of molded fiber products.

Amherst 304L Stainless Steel 75 Gallon Vertical Pressure Tank

Used- Amherst 304L Stainless Steel Pressure Tank, Approximately 75 Gallon, Vertical. Approximate 30" diameter x 22" straight side. Dished top and bottom heads. Internal rated 130 psi at -20 to 150 degrees F. Top entering 3-blade prop agitator, driven by 0.5 HP, 3/60/230/460 volt, 1725 rpm gear motor, 5 to 1 ratio. Openings top: 8" handhole with cover, 3", (2) 2", 1". 3" Center bottom outlet with manual valve. Mounted on (4) legs with casters. National Board# 1379, Serial# 1601, Built 2020. Previously used for raw materials used in the production of molded fiber products.