Adhesive and Sealant Equipment

DCI 1,000 Liter Reactor – Jacketed Emulsification Mixing Tank

DCI 1,000 Liter Reactor Jacketed Emulsification Mixing Tank. Vessel is rated 30 psi at -20 to 300 degrees F, Jacket rated 150psi at -20 to 300 degrees F. Bottom mounted emulsifier, driven by a 0,65kw (0.87hp) 3/60/460v 3410 rpm motor. Includes a thermowell and spray ball. 3" Pneumatically actuated sanitary discharge valve, (1) VFD and box containing misc. pneumatic control valves, piping, etc. Mounted on 3 stainless steel legs. Serial# JS4470B, National Board# 7434, Built 2009.

MFR: DCI

Used Inox AG 1000L Mobile Pressure Tank – 316L Stainless Steel, 28.4 PSI, Horizontal

Used- Inox AG Mobile Pressure Tank, 1000 Liter (264.25 Gallon), 316L Stainless Steel, Horizontal. Approximate 31 diameter x 75 straight side, dished ends. Internal rated 2 kp/cm2 (1.96 bar/28.4 psi) at 200 degrees C. (392 F). Openings top (3) 4, 12-1/2, (2) 1-1/4, 2-1/4 end bottom outlet. Mounted on removable wood saddles with a carbon steel cart with casters. Located in the U.K. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Inox Industries

Used Thermo Scientific Single Use Bioreactor – Model HyClone 1000 Liters

Used- Thermo Scientific Single Use Bioreactor, Model HyClone, 1000 liter capacity, Stainless Steel. Open top, flat bottom shell. 38" diameter x 50" straight side. Dimple Jacket. Operating Temperature Range: Ambient to 40 +/- 0.1 Degrees C (104+/-0.2 DegreesF). 0.5psi Bag Pressure. Includes Brother 3 phase induction motor, 1/2hp 3/60/208-230/460v 1720rpm, 15:1 Ratio. Mounted on Stainless Steel Frame. Serial# H10289-03.

MFR: Thermo Scientific

Used 1000 liter single use bioreactor, Made by Thermo Scientific

Used- 1000 liter single use bioreactor, Made by Thermo Scientific, Stainless Steel. Open top, flat bottom shell. 38" diameter x 50" straight side. Dimple Jacket.Operating Temperature Range: Ambient to 40 +/- 0.1 Degrees C (104+/-0.2 DegreesF). 0.5psi Bag Pressure. Includes AB series A Drive, Brother 3 phase induction motor, 1/2hp 3/60/208-230/460v 1720rpm, 15:1 Ratio. Mounted on Stainless Steel Frame. Serial# H10289-04.

MFR: Thermo Scientific

Unused- Jiangsu 1000 Liter (264 Gallon) Emulsification Mix Tank

Unused- Jiangsu 1000 Liter (264 Gallon) Emulsification Mix Tank. Internal Atmospheric Rated at 122 Deg F. Conical Top and Bottom. 304 Stainless Steel Construction. Center agitator with scraper, off center Emulsifier. Jacketed, rated 29psi @ 122 Deg F. Emulsifier Motor is 7.5 kw, 220V, 3/60.Insulated. Mounted on 4 legs. Never installed.

264 Gallon Jacketed Tank (Reactor)

Used- 264 Gallon Jacketed Tank (Reactor). 316L Stainless Steel, Insulated, Full Vacuum. Two zone jacket rated: 100 psi @ 300 deg.f. Vessel mawp: 50 psi @ 300 deg.f. Rated full vacuum. Insulated. With pressure rated sight glass type manway. Sanitary interior polish. With bottom mount agitator (requires motor). Top inlets: one 4'', two 3'', five 2'', four 1.5", Center discharge: 3''. Dish top and bottom. Top cip spray ball and temperature probe. Tank is on three stainless steel legs with pads, with lifting lugs. Certified by Industries d'Acier, Serial# 310, built 2018. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

Used Wenzhou ACE Machinery 1,000-Liter 316L Sanitary Mixing Tank – Jacketed, Insulated & Load Cell Equipped

Lightly-Used- Wenzhou ACE Machinery 1,000-liter (264 Gallon) (1 cubic meter) stainless steel sanitary mixing tank with 316L stainless steel product-contact surfaces and 304 stainless steel exterior. The unit was upgraded to meet U.S. safety standards by a licensed PE contractor. The inner tank features a mirror-polished finish, 5 mm wall thickness, and a dimple jacket, with 2 mm outer cladding and PU foam insulation. Vessel is equipped with a 4 kW agitator operating at 36 RPM with Teflon scraper and a control box for mixing speed control. The inner vessel has a design pressure range of -0.1 MPa to 0.2 MPa, while the jacket has a design pressure of 0.35 MPa. Tank features sanitary clamps on each inlet orifice, a 3" bottom valve, load-cell connections, and one spare single-face mechanical seal. Additional equipment includes electrical upgrades, required safety equipment, condenser, controller, Rice Lake load cells, relief valve, and rotary shaft cage protection. Electrical requirements are 480 V, 3-phase, 60 Hz. Possible applications and suitable products include sanitary liquid mixing and processing of liquid products requiring agitation, heating, cooling, vacuum, pressure processing, or weight-based measurement.

Shandong HG Machinery 10,000 Liter Fermentation Tank

Unused - Shandong HG Machinery 10,000 Liter Fermentation Tank, 2641 Gallon (85 BBL), 304 Stainless Steel, Vertical. Approximately 78.74" diameter x 137.79" straight side. Dished top, 60 degree cone bottom. Jacket approximately 14m2, test pressure 0.2MPa (29 PSI). Openings top: 102mm (4"), 89mm (3.5"), 51mm (2"), Side: 540mm x 440mm Manhole (21.25" x 17.3"), 38mm (1.5"), 19mm (.75"). 1-1/2" Side cone outlet, 818mm (32.2") discharge height. 1-1/2" Center bottom outlet, approximate 60mm (2.36") discharge height. Mounted on (4) legs. Approximate 87" x 87" x 236" tall, 3400 lb

Used Horizontal 316L Stainless Steel Tate Metalworks Tank, approx. 26,700 gallon capacity

Used- Horizontal 316L Stainless Steel Tate Metalworks Tank, approx. 26,700 gallon capacity. 10 diameter X 44 long straight side; Top Fittings: (2) 30" manways, (1) 1", (1) 2", (2) 3", (3) 4"; Has one bottom end 4" outlet; Dished ends; Ends certified by Trinity Industries; Mounted on saddles; 12-6" shipping height. Previously stored Sulfuric Acid.

Used National Board Certified Precision Stainless 103 Liter / 27.2 Gallon Jacketed Tank

National Board Certified Precision Stainless 103 Liter / 27.2 Gallon Jacketed Tank, 316L Stainless Steel, Vertical. Approximate 20" diameter x 26" straight side. Dished removable top head, dished bottom head. 304L Stainless steel dimple jacket, rated 100psi / FV at -20 to 250 degrees F. Internal rated 45psi / FV at -20 to 250 degrees F. Openings: (5) 3", (1) 1-1/2". (2) 1", 1-1/2" Center bottom outlet with approximately 8-10" discharge height. (4) internal baffles. Mounted on (4) legs with casters. Serial# 8080-5, National Board# 5375. Used as Freeze / Thaw Vessel.

Used Sauer WP6208 BasSeal Helium Compressor | 1000 m³/h | 53.8 Barg | 270 HP | 2023

Used Sauer WP6208 BasSeal Helium Compressor | 1000 m/h | 53.8 Barg | 270 HP | 2023. 6 cylinder, 2 stage, 1000 cubic meters per hour volumetric flow rate, max. working pressure 53.8 barg. Discharge relief valve set pressure 56.5 barg, water cooled. Complete with controls, fully automated with HMI screen and mounted on a steel skid. 270 HP, 460/3/60, 307 FLA. Serial number 113730, new in 2023. Previously used for testing a NASA system. Reported to have 47.9 run hours.

Used Thermax TAC L5 E1 Vapor Absorption Chiller – 276 Ton, 970 kW, 2019 Build, 200 Hours

Used- Thermax Vapor Absorption Chiller, Model TAC L5 E1. 276 ton cooling capacity; 970 kW; 166.5 cubic meters/hour chilled water circuit flowrate; 276 cubic meters/hour cooling water circuit flowrate; 106 cubic meters/hour hot water circuit flowrate. Components included: VFD's, HMI and sensors. OAD: 15.5' L x 7.0' W x 10.5' H. 3/60/575V. Built 2019. Reported to have 200 hours. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.