Cannabis Industry Equipment

Used Autoclave Engineers PV4941 Hastelloy C High Pressure Reactor – 6000 PSI – 0.25L – Electric Jacketed

Used- Autoclave Engineers Hastelloy C High Pressure Reactor, Model PV4941. Flat top. Dished bottom. Body is approximately 1.75" ID X 6" Deep. Approximately .25 Liter (.066 Gallon) Body rated 6000 psi. Penn Special PV4941. Top head bolted - rated 5700 psi @ 650 degree F. Top mounted drive with agitator. Electric Jacket. Mounted in stand.

MFR: Autoclave Engineers

In-Stock Paul O. Abbe 0.25 Gallon Sigma Mixer with Jacket & VFD Controls

New and In-Stock Paul O. Abbe Model SBM-0.25 Laboratory Sigma Blade Mixer. .25 Gallon Working Capacity. Double U" shaped bowl casting machined on center line. Removable idle end allows blades to be removed. 304 SS. Rated Vacuum Internal. Internal and External welds are continuous, ground smooth, flush and pit free. Internal Surface is 180 Grit, 20-30 Ra. External Surface is Glass Bead Blasted. Free flowing open jacket with baffles for even distribution of heating media. Jacket is constructed of 304 SS and rated 14.7 psig @ 400 Deg. F with NPT Connections. Insulation Shroud is 1" Chloride Free Rock Wool with welded SS Shroud. Cover is a Clear Lexan design with Manual Clamps and Safety Switch. Thermowell is mounted through the Lexan Cover. Manual Tilt to Approx. 105 Degrees. Blades are Cast 304 SS Tangential Sigma Design. Four (4) PTFE packing glands with adjustable stainless-steel followers. Four (4) sealed roller bearing on the drive side only. Driven by a HP all stainless steel motor and stainless steel reducer. 304 SS Support Frame. Controls are NEMA 4X Stainless Steel and Supplied Loose. Includes- HP ABB VFD, Speed control potentiometer, RPM readout (front blade speed), Product temperature readout, Start/stop push buttons, Dual pushbuttons for discharge (see drawing below), Forward/reverse switch, Integration of limit switch on cover, Electrical input: 460 volt, 3-phase, 60 Hz, Dimensions 12" W X 24" H x 24". This Mixer is Brand New and In-Stock. Ready for Immediate Delivery and comes with a 1 Year Warranty. It can be inspected under power in our shop in Belvidere, IL.

MFR: Paul O Abbe

Used Patterson-Kelley 8 Qt Twin Shell Dry Blender – 0.26 Cu. Ft., 304 SS, 1/8 HP Motor

Used- Patterson-Kelley Twin Shell Dry Blender, (0.26) Cubic Feet (8 quart) Capacity, 304 Stainless Steel. (2) 7-1/2" Diameter x 13" long shells, 2 charge ports with (1) cover, (1) missing, oval bottom outlet with cover. Driven by a 1/8 hp, 1/60/115/230 volt, 1725 rpm gearmotor. Mounted on stand.

MFR: Patterson Kelley

Used Winkworth Z2 Vacuum Double Arm Mixer – 1.75L, 316 SS, Industrial

Used- Winkworth Vacuum Double Arm Mixer, Model Z2 Vacuum, 316 Stainless Steel. Working capacity 1.75 liters. Approximate 140mm (5.5") x 140mm (5.5") x 109mm (4.29") deep jacketed vacuum trough. Internal rated 60 psi at 300 degrees C (572 F). Jacket rated for 3.5 bar (50psi) at 300 degrees C (572 F). Dual overlapping sigma style mixing blades. Driven by a .37kw (1/2hp), 3/60/460 volt, 1690 rpm gear motor, manual speed control, output 19 to 95 rpm. Top vacuum cover with 2.5" sight glass. Control panel. Includes VWR international model 1166 temperature controller. Base mounted on cart. Serial# 16564.

MFR: Winkworth

Used Tokushukika Kogyco Agi-Homo Mixer – 20 Gal, 316 SS, Hydraulic Tilt, Jacketed

Used- Tokushukika Kogyco Co Ltd Agi-Homo Mixer, Model 20-50. 20 Gallon (75 liter) working capacity. 316 Stainless steel polished interior. Stainless steel jacketed rated to 40 psi (2.6 bar). Tiltable bowl 18-1/2" (476 mm) diameter x 18-1/2" (476 mm) deep. Counter rotating paddle agitator with end scrapers. 0.4 kw (0.6 hp) 220 volt. In combination with homo mixer. 2-3/4" (97 mm) diameter turbine blade, 1.5 kw (2.25 hp) 220 volt. Hemi bottom. Dish top with hydraulic tilt. 0.75 kw (1.12 hp) 220 volt. 1-1/2" (41 mm) cbo with shut-off valve. Unitized with separate control panel and starters. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Tokushu Kika

Used Paul O Abbe Stainless Steel Fluidizer – 0.7 Cu Ft for Sale

Used- Paul O Abbe Fluidizer, Stainless Steel. Approximate 0.7 cubic feet, 20 liter. Non jacketed trough, 16" wide x 18-1/2" long x 18-1/2" deep. (2) 1-1/2" diameter x 15" long shafts, each have (14) 3" long x 3" wide x 1/8" thick paddles on 1/2" diameter posts. Driven by (2) .33hp, 3/60/230/460 volt, 1700rpm motors, through a reducer 8:1. Bottom bombay doors. 9-1/2" Diameter bottom discharge, 20" discharge height. Includes mounted control panel. Mounted on (4) casters. Serial# A45254.

MFR: Paul O Abbe

Used DCI 3-Liter (0.79-Gallon) 316 Stainless Steel Reactor – Jacketed, Vertical

Used- DCI Reactor, 3 Liter (0.79 Gallon), 316 Stainless Steel, Vertical. 6" Diameter x 8" straight side, flat tri-clamp top, dished bottom. Internal rated +40/-15 psi at -20 to 300 degrees F, jacket rated +10/-15 psi at -20 to 300 degrees F. Openings: top 3/4", 5/8", 5/16", 1" tri-clamp; 1/4" center bottom outlet. Mounted on 3 stainless steel legs. Serial #JS2221-E. Built 2002.

MFR: DCI

Used Alfa Laval EH-W15 Heat Exchanger with Control Panel – 60kW, 10 Bar, Built 2014

Used- Alfa laval Model EH-W15 Heat Exchanger. 0,015 m3 (approximately 0.16sqft) shell/tubes volume, 10bar 160 degrees C Shell rating. 3x480 volt, 60kw power requirements. Serial# POM 215963, built 2014. Includes panel. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Alfa Laval

Unused Rosenmund Guedu RGFD Filter Dryer – 316L Stainless Steel, PLC Controlled

Unused- Rosenmund Guedu RGFD Filter Dryer fabricated of 316L stainless steel with approximately 0.25 m2 filtration area. This premium OEM agitated filter dryer was never installed or placed into service. Features include a side solids discharge and column-mounted, two-arm S-blade heated agitator with mechanical seal and bellows for filtration, cake washing, mixing, and vacuum drying in a single enclosed vessel. Includes an APOVAC explosion-proof gas recirculation system and an additional APOVAC unit originally supplied for a tray dryer. Mechanical components are present; however, controls were never built, and the purchaser will need to design and implement a control system. Engineering drawings are available. Ideal for pilot plant, process development, scale-up, and small-batch production of pharmaceutical APIs, fine chemicals, specialty chemicals, biotechnology products, and other high-value materials requiring contained filtration and drying. Built in 2001.

MFR: Rosenmund

Used Friulair Chiller | Model CWM003-UE | 0.71 Ton | R407C Refrigerant | Compact Cooling System

Used- Friulair Chiller, Model CWM003-UE. 0.71 Ton nominal capacity. V0.013 gallon Refrigerant Circuit, R407C with 33.51 oz charge. Serial# 130021582. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

Used Munson Industrial Rotary Blender – Model MX-1-SS

Used- Munson Industrial Rotary Blender, Model MX-1-SS. 1 cubic foot capacity; Stainless steel mixing chamber; Equipped with liquid spray nozzle. Mounted on portable stand with tilt discharge capabilities. Serial# 12190.

MFR: Munson Machinery

Used AMK VIU4 4-Liter Extrusion Kneader Mixtruder – Stainless Steel Sigma Blade Mixer Extruder with Vacuum Cover

Used- 4 Liter AMK Extrusion Kneader Mixtruder, Model VIU4. Stainless steel construction, vacuum cover, approximately 8" x 8" x 7.5" deep mixing changer, tangential sigma blades driven by 2.2 kw motor drive, discharge extruder driven by 1.5 kw motor drive, jacketed bowl and extruder barrel, on base, serial# 12202. Built 1985.

MFR: AMK