Power Generation Equipment
Stock No.:
47083001Used Flottweg Z5L Solid Bowl Horizontal Decanter Centrifuge – 2,650 RPM, 55 kW
Used- Flottweg Z5L Solid Bowl Horizontal Decanter Centrifuge. 316/329 Stainless steel construction (product contact areas), maximum bowl speed 2650 rpm, single lead conveyor with welded hardfacing, cyclo gearbox, stainless steel discharge chutes, standard feed pipe, grease lubrication system, adjustable liquid plate dams, fiberglass bowl cover, base, 55 kw, 380/3/50 main drive.
MFR: Flottweg
Stock No.:
52345013ATM Delaval 20 x14 Perforated Basket Centrifuge
Used- ATM De Laval 20 x14 Perforated Basket Centrifuge, 316 Stainless Steel contact parts. 28" diameter x 19-1/2" deep chamber. 20" diameter x 14" deep perforated basket, with approximately 1/8" diameter holes. Hinge top cover with (2) 4" sight glass, 2", 1", 4" side bottom outlet. Includes hydraulic pack driven by a 5hp 3/60/575 volt, 1700 rpm motor. Serial# 69657.
MFR: ATM
Stock No.:
54505001Used Quincy QCD-20 Rotary Screw Air Compressor System with 120 Gallon Tank, Dryer & Oil Water Separator
Used Quincy QCD-20 Rotary Screw Air Compressor System with 120 Gallon Tank, Dryer & Oil Water Separator. Rated 125 psig. 97.2 CFM. 20 HP, 3/60/460V. With SPVG 120 gallon vertical air receiver Tank; Mikropor Model MK-US-125 Digital 125 SCFM air dryer; and Clean Resources Model IDC Pak Series oil water separator. 32,211 hours. Built 2010.
MFR: Quincy
Stock No.:
54687135Used 20"dia. x 12" deep Tolhurst center slung perperated basket centrifuge. Solid bottom. Sight glass in the lid. Tripod suspension. V belt drive. 1600 rpm. On casters. Driven by a 5 hp 230/460 vac ...
Used-20"dia. x 12" deep Tolhurst center slung perperated basket centrifuge. Solid bottom. Sight glass in the lid. Tripod suspension. V belt drive. 1600 rpm. On casters. Driven by a 5 hp 230/460 vac 3 ph motor that is tagged for hazarous locations. Serial number T-71879.
MFR: Tolhurst
Stock No.:
10986027Used AB Process / JBT Mixing System | 200 Gallon Jacketed Skid-Mounted Mixer
Used AB Process / JBT Mixing System | 200 Gallon Jacketed Skid-Mounted Mixer. Jacket rated 150 PSI at 366 degrees F. 36" straight side x 41" diameter tank dimensions, cone bottom. Scrape agitator. 15 HP SPX product pump. On Mettler Toledo load cells. Mounted on skid Built 2018.
MFR: JBT Foodtech
Stock No.:
54280002Used 200 Gallon Stainless Steel Vertical Mix Tank – Propeller Agitated, Leg Moun
Used 200 Gallon Mix Tank, Stainless Steel, Vertical. Approximately 48" diameter, 24" straight side. Flat top (with cover), Dished bottom. Clamp-on Top entering 3-blade propeller-style agitator, driven by a 3/4hp, 3/60/208-230/460 volt, 1725rpm washguard motor. Opening Top: 2", 2-1/2" diameter. 2" Center bottom outlet with 14" discharge height. Mounted on (3) stainless steel legs. No Manufacturer Tag.
MFR: Unknown
Stock No.:
54512011Unused 2,000 Gallon 316 Stainless Steel Process Tank with Side Scrape Mixer
Unused TSI 2,000 Gallon Vertical Stainless Steel Agitated Tank. 316 Stainless steel. Approximately 84" diameter x 72" straight side. Dished top and bottom. Stainless steel top agitator bridge with top entering counter rotating anchor style agitator with side scrapers and inner flat bars (1/2" x 4"), bottom supported, driven by a 5//3 hp, 3 phase/60//50hz, 230/460 - 190/380 volt 1750/1450 rpm motor, and a 7.5//5 hp, 3phase/60//50hz, 230/460 - 190/380 volt, 1770/1475 rpm motor through a reducer 8.48:1 ratio. 18" Top manway. 3" Center bottom outlet, approximate 56-1/4" discharge height. Mounted on (4) stainless steel legs. Drawing available. Manufactured by (TSI) Todd Street Inc Stainless Steel Fabricators. Overall dimensions approximately 84" x 96" x 192"tall. Ideal for food, cosmetic, pharmaceutical, chemical, and specialty product processing applications.
Stock No.:
54687073Used 2,000 gallon Santa Rosa Stainless Steel vertical tank with three zone 20 PSI MAWP jacket. Overall height is 240" tall on four legs. Main shell is 66" OD x 125" straight side. Long bottom cone ha...
Used-2,000 gallon Santa Rosa Stainless Steel vertical tank with three zone 20 PSI MAWP jacket. Overall height is 240" tall on four legs. Main shell is 66" OD x 125" straight side. Long bottom cone has two 1" threaded jacket fittings and one 2" tri clamp bottom fitting. Side has four 1" threaded fittings for the jacket, one 3" tri clamp, one 2" tri clamp, one 16" x 20" elliptical manway and two 1" threded couplings for probes. Top has 3- 2" tri clamp fittings. Cone length 53" long.
MFR: Santa Rosa
Stock No.:
54687075Used 2,000 gallon stainless steel vertical jacketed tank with cone bottom and dished top on four legs. Tank is 72" ID x 99.5" straight side. Side has 20" x 16" eliptical manway, one 3/4" tri clamp no...
Used-2,000 gallon stainless steel vertical jacketed tank with cone bottom and dished top on four legs. Tank is 72" ID x 99.5" straight side. Side has 20" x 16" eliptical manway, one 3/4" tri clamp nozzle, two 3/4" copper pipes to the jacket. Dished top has one 2" tri clamp nozzle and one 3/4" tri clamp nozzle to a spray ball. Cone has two 1-1/2" tri clamp nozzle. Cone is 35" length. Top has four lift lugs. Manufactured by Modern Brewing & Design Inc.
Stock No.:
54687173Used 2000 gallon stainless steel vertical mix tank equipped with a top-mounted Philadelphia Mixers agitator that has pitched blade turbines to allow for maximum axial flow. Tank vessel is rectangular...
Used-2000 gallon stainless steel vertical mix tank equipped with a top-mounted Philadelphia Mixers agitator that has pitched blade turbines to allow for maximum axial flow. Tank vessel is rectangular with a straight side length of 132" and a width of 60". Agitator driven by a 15 hp, 1760 rpm motor that requires 230/460 vac, 3 ph electricity. Discharge has a Worcester model 3-416-T-151 ball valve with 3" outlet. There are two 63" w x 21.5" l hinged lids for mainetenance/operation at the top. Tank has some dried paint residue inside.
MFR: Philadelphia
Stock No.:
54687174Used 2000 gallon stainless steel vertical mix tank equipped with a top-mounted Philadelphia Mixers agitator that has pitched blade turbines to allow for maximum axial flow. Tank vessel is rectangular...
Used-2000 gallon stainless steel vertical mix tank equipped with a top-mounted Philadelphia Mixers agitator that has pitched blade turbines to allow for maximum axial flow. Tank vessel is rectangular with a straight side length of 132" and a width of 60". Agitator driven by a 15 hp, 1760 rpm motor that requires 230/460 vac, 3 ph electricity. Discharge has a Worcester model 3-416-T-151 ball valve with 3" outlet. There are two 63" w x 21.5" l hinged lids for mainetenance/operation at the top. Tank has some dried paint residue inside.
MFR: Philadelphia
