Food and Beverage Equipment
Stock No.:
53043003Industrial Groen TDH-40 Tabletop Steam Kettle – 40-Quart, Tilting, Natural Gas
Used- Groen 40 Quart Capacity Table Top Kettle, Model TDH-40, Stainless Steel. Approximate 16-1/2" diameter x 14" deep. Self-contained steam jacketed unit with natural gas heated steam source contained within unit. Input rated 52,000 btu / hr. 2/3 bottom jacket rate 50 psi at 300 degrees F. Manual tilting with pour lip. Mounted on a base. National Board# 29964, Serial# 29964. 1/60/110 Volt.
MFR: Groen
Stock No.:
10128092Used Patterson-Kelley 100 cu. ft. Twin-Shell Vacuum Dryer | 150 PSI / Full Vacuum | 10 HP Hazardous Duty | 304 SS | Serial #204190
Used- Patterson-Kelley 100 cu.ft. twin shell vacuum dryer. Jacket is rated for the 30 psi @ 250 F. The drying chamber is rated for 150 psi and full vacuum. Drying chamber is designed to turn between .96 to 7.66 rpm using a 10 hp reeves drive. Motor is tagged for hazardous location. The outer shell of each chamber measures 56" diameter x 96". The chamber has an 18" access panel. There is a 12" discharge at the bottom. Contact surfaces are constructed of 304 stainless steel and the jacket is carbon steel. Maximum density of product is 75 lbs per cu.ft. Overall dimensions are 19' 9" long x 83" wide x 10'1" tall. Serial # 204190. Requires 460 vac 3 phase electrical supply.
MFR: Patterson Kelley
Stock No.:
10128118Used North American Mfg. Co. CS Centrifugal Fan | 100 HP Industrial Combustion Air Blower
Used North American Mfg. Co. CS Centrifugal Fan | 100 HP Industrial Combustion Air Blower. Rated for 10,000 cfm @ 24 SP. Blower has a 18" diameter inlet and a 23" outlet. Has a 100 hp motor. Requires 460 vac 3 phase electrical supply. Inlet has Fives North American combustion air filter 51" wide x 50.25" tall x 41" long. Overall dimensions 51" wide x 74.5" tall x 113" long. Five of the filter elements were lost in shipping and will need to be replaced if it is to be used with the air filter.
MFR: North American
Stock No.:
10715060IN STOCK- Paul O. Abbe Model RB-100 Ribbon Blender. New.
NEW & IN STOCK- Paul O. Abbe Model RB-100 Ribbon Blender. In -Stock .100 Cubic Foot working capacity. 108 Cubic Foot total volume. Type 304 stainless steel polished. Food grade. All stainless steel construction. Trough dimensions: Approximately 44.9" wide x 93.8" long x 49.3" deep. Internal double spiral ribbon. Packing glands and pillow block bearings. 30 hp SEW Euro drive hollow bore design. 230/460 volt, 1775 rpm, 3/60 with approximately output 31 rpm. Top cover with hold down clamps and limit switch. Center Loading cover with welded safety grate, 30" wide x 50" long. Approximate 4.7" wide x 14.2" flush air operated plug valve. Discharge housing is approximate 18.5" wide x 24" long. Approximately 8" discharge height. Approximate weight 7,260 pounds. Approximate overall dimensions: 63.3" wide x 146.4" long x 80.8" high. Controls are available upon request.
MFR: Paul O Abbe
Stock No.:
11059370Used Ross PVM-100 Triple Motion Vacuum Mixer | 100 Gallon | Stainless | High Shear | 3 Mixers | Jacketed
Used Ross Triple Motion Vacuum Mixer, Model PVM-100. Approximately 100 gallon stainless steel jacketed change can. Vacuum-rated system equipped with three independently driven mixing assemblies consisting of a 10 HP three-wing anchor agitator with side and bottom scrapers, 10 HP high speed disperser, and 25 HP high shear rotor stator emulsifier. Unit features a hydraulic lift for raising the mixing head, jacketed vessel for heating or cooling, and includes the control panel. Designed for mixing, dispersing, homogenizing, and emulsifying high viscosity products. Suitable for processing creams, ointments, emulsions, adhesives, sealants, gels, pastes, and other high viscosity products for pharmaceutical, cosmetic, food, and specialty chemical applications. Built 2000.
MFR: Ross Industries
Stock No.:
11585120Used JH Day Double Ribbon Blender – Approx. 100 Cubic Foot Stainless Steel
Used- JH Day approximately 100 cubic foot stainless steel double ribbon blender. 40" wide X 120" long X 48" deep. 8" center bottom discharge. Stainless steel covers. 20 Hp 3 phase 60 cycle 230/460 volt 1760 rpm motor with Stober drive reducer output rpm 54.5. Class 2 Group BCD. Direct drive
MFR: J H Day
Stock No.:
47147034Used Lee 100 Gallon Stainless Steel Steam Jacketed Kettle
Used Lee 100 gallon stainless steel jacketed cooking and mixing kettle, Model #100D7, Serial # 31854-1, built in 2003, with stainless steel construction, 90 psi steam jacket, National Board number 9660, single-action agitator with scrapers, and bottom-center discharge. Suitable for batch cooking, heating, and mixing applications and products requiring agitation and surface scraping.
MFR: Lee Ind
Stock No.:
49256004Used Gemco Double Cone Blender – 100 Cu. Ft. Working Capacity, 304 SS, 7.5 HP Motor
Used- Gemco Double Cone Blender with approximately 100 cubic feet working capacity (140 cubic feet total capacity), constructed of 304 stainless steel and designed for efficient, large-batch blending of dry powders and granules. The unit is equipped with a 7.5 HP gear motor rated for 3/60/230/460 volt service at 1,770 RPM, pneumatic braking system, 18-inch diameter charging door with 8-inch access port, and a 12-inch center bottom discharge fitted with a manual butterfly valve. Featuring an 84-inch inside diameter belly band and the proven double cone blending design, this blender provides gentle, low-shear mixing and excellent blend uniformity for free-flowing materials while minimizing product degradation. Overall dimensions are approximately 156" long x 48" wide x 147" high, with an approximate weight of 12,000#. The large-capacity vessel is well suited for nutraceutical and dietary supplement manufacturers, food ingredient processors, spice and premix producers, bakery and beverage ingredient operations, chemical processors, and contract manufacturing facilities requiring efficient production-scale blending. The stainless steel construction offers durability, corrosion resistance, and ease of cleaning, making this unit an excellent choice for a wide range of food, nutraceutical, chemical, and industrial powder blending applications.
MFR: Gemco
Stock No.:
51065001Ross Model HDM 100 Stainless Steel Double Planetary Mixer
Used- Ross HDM 100 stainless double planetary mixer, 10100 gallon working capacity with 30 hp drive, designed for high viscosity production batches in chemicals, pharmaceuticals, cosmetics, and food. (2) Stirrers approximate orbital speed 30 rpm, stirrer speed 34 rpm. Top dust hood with charge port, bottom fume hood, air/oil lift. Requires a 34'' diameter x 28-1/2'' deep can. Driven an 30 hp, 3/60/460 volt, 1755 XP motor, thru Delroyd Model HV100 reduction gear, 59.4 to 1 ratio. Mounted on an I beam frame. Serial# 37432-1.
MFR: Charles Ross
Stock No.:
52377001Used GSR SRL CT/400 Cocoa Machinery Homogenizer – 304 SS, 100-600kg Capacity
Used- GSR SRL Cocoa Machinery Homogenizer Model CT/400. 304 Stainless Steel contact parts. Loading capacity from 100kg - 600kg. Approximately 100 gallon vessel capacity. Approximate 32" diameter x 28" straight side. Top entering 3-blade prop agitator, driven by a 4kw(5.36hp), 3/60/230/460 volt, 1692 rpm motor. Internal homogenizing baffle. Internal Inner and outer pipe jacket. Openings top: 8" manway with cover, approximately 6" for agitator, (5) 2". 2" Center bottom outlet with valve. (4) baffles. Control panel with AB powerflex 4 VFD. Mounted on carbon steel frame with casters. Serial# 3706/10/1391.
Stock No.:
52882001Used Littleford Day Mogul Double Arm Mixer – Model 100 – 100 Gallon – Jacketed – 75 HP – Vacuum Lid – Stainless Base
Used- Littleford Day Sanitary Mogul Double Arm Mixer, Model 100. 100 Gallon working capacity (150 total), 304 stainless steel on product contact areas. Jacketed bowl 40" left to right x 42" front to back x approximately 21" deep, rated 125 psi at 353 degrees F. Cored masticator blades, geared one end, hydraulically operated domed top cover suitable for vacuum with power pack sanitary split type stuffing boxes. (2) 6" Diameter bottom outlets. Mixer driven by a 75 hp, 3/60/208-230/460 volt, 1780 rpm motor thru a Foote-Jones reducer, ratio 40 to 1, approximate front blade 41 rpm, rear 27 rpm. Includes a control panel and a Torit stainless steel dust collector. Mounted on a stainless steel base. Serial# 42145-4629. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.
MFR: Littleford