Food and Beverage Equipment

Clear
https://ww2.aaronequipment.com/Images/ItemImages/Filters/Rotary-Vacuum-Filters/Alar-Engineering_13527030_ak.jpg

Stock No.:

13527030

Used Alar Auto-Vac Rotary Vacuum Drum Filter System – 2' x 2', Model 220

Used- 2' x 2' Alar "Auto-Vac" Rotary Vacuum Drum Filter System. Drum measures 2' diameter x 2' long. Model Auto-Vac 220. Carbon steel drum. With motorized advancing knife discharge. On base with poly tank and .3 HP Lightnin Agitator drive, shaft and prop, 5 HP Atlantic Fluidics Vacuum Pump and receiver pump. Filter agitator with .3 HP drive. .5 HP drum drive gear reduced, chain driven with guard. Unit looks to be in good condition.

MFR: Alar Engineering

https://ww2.aaronequipment.com/Images/ItemImages/Dryers-Drying-Equipment/Hollowscrew/Anderson-Dahlen_53147051_aa.jpg

Stock No.:

53147051

Used Anderson Dahlen Stainless Steel Dual Screw Holoflite Dryer – 24” x 20’ ASME Rated

Used- Anderson Dahlen Stainless Steel Dual Screw Holoflite Dryer, 24" diameter X 20' long. Constructed from 316L stainless steel. Screws and jacket are rated for 100 PSI/FV @ 350 degrees / -20 degrees Fahrenheit. Previously used to dehydrate food waste. Previously heated by hot oil. ASME code built.

MFR: Anderson Dahlen

https://ww2.aaronequipment.com/Images/ItemImages/Dryers-Drying-Equipment/Hollowscrew/S-Howes-24U24-JS_53912001_ab.jpg

Stock No.:

53912001

Stainless Steel 24” U-Trough Screw Conveyor with Thermal Heating & Cooling

Used- S. Howes U-Trough Thermal Processing Screw Conveyor, Model 24U24-JS. 24" diameter screw, 24' Long inside dimension. Oversized 16" diameter shaft pipe, Journals thru-bored to allow heating fluid flow through shaft. 22' Overall jacket length; 14.9 psig design pressure. Designed for thermal fluid heating/cooling media or low pressure steam. 316 stainless steel construction in product contact and jacket areas. 3" inlet/outlet on main body; 1" on heated/cooling screw. Fulton control panel 120-VAC, 1-Phase, 60HZ with 6 digital PID temperature controllers. 3 x 3" pneumatic valves for inlet fluid control on main body of screw conveyor. 1 x 1" pneumatic valve for inlet fluid control on screw. 10 x 3" manual gate valves for support plumbing, Sectional covers. Driven by a 15 hp, 3/60/460V motor. Machine # 117390, New in 2012. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: S Howes

https://ww2.aaronequipment.com/Images/ItemImages/Screeners-Sifters/Circular-Screeners/Kason-K-24-2-SS-P_54209003_aa.jpg

Stock No.:

54209003

Used Kason 24" Portable Stainless Steel Screener | Model K-24-2-SS-P | 1/3 HP Motor | Includes Decks, Rings & Screens

Used Kason 24" Portable Stainless Steel Screener, Model K-24-2-SS-P, 1/3 HP Motor. Includes Decks, Rings & Screens. Driven by a 1/3hp, 3/60/460 volt, 1140rpm motor. Mounted on carbon steel cart with casters. Serial# KC-1045.

MFR: Kason

https://ww2.aaronequipment.com/Images/ItemImages/Dryers-Drying-Equipment/Hollowscrew/Denver-D24-24-6_54447001_aa.jpeg

Stock No.:

54447001

Denver Sala Holo-Flite Dryer D24-24-6 | Refurbished Indirect Thermal Sludge Dryer System

Fully Refurbished Denver Sala Holo-Flite Dryer, Model D24-24-6. Indirect thermal sludge drying processor with dual holo-flite screws and vapor dome. Fully refurbished with new components. 316 Stainless Steel contact surfaces. (2) Screws 24'' diameter x 24' long, rated for 150 psi at 650 degrees F. Non-contact carbon steel exterior trough jacket rated 30 psi at 650 degrees F, Hot Oil or Water/Glycol heating medium. 10 HP Baldor motor. Contains Sumitomo Cyclo 6000 gearbox. Tomaso Built process control system provides fully automated operation of the Denver-Sala D24-24-6 dryer, ensuring consistent product quality, maximum throughput, and equipment protection across variable feed conditions; Product Temperature Protection, Residence Time Control, Feed Interlock System, Dynamic Safety Overrides, Vapor & Pressure Control, Mechanical Protection, Thermal Oil Control, Recipe-Based Operation, CIP Mode, HMI Interface. Fully refurbished 12/23/2025.

MFR: Denver

https://ww2.aaronequipment.com/Images/ItemImages/Filters/Pressure-Leaf/Oberlin-OPF-24_54628001_aa.jpg

Stock No.:

54628001

Used Oberlin OPF-24 Fully Automatic Horizontal Pressure Filtration System

Used Oberlin Fully Automatic Horizontal Pressure Filtration System, Model OPF-24. Serial/configuration OPF24-165MD. Features 24 square feet (2.23 m) of filtration area with nominal capacity up to 960 GPM on certain water-based applications or 400 GPM on 200-SSU oil. Rated for 45 psi maximum filter pressure, 115 psi maximum air supply pressure and 160 F maximum liquid temperature. Automatic cycle includes pressure filtration, cake formation, air drying, media advancement and dry-cake discharge using disposable filter media or a reusable cleanable belt. Approximate footprint: 145" L x 77" W x 82" H.

MFR: Oberlin

https://ww2.aaronequipment.com/Images/ItemImages/Filters/Pressure-Leaf/Oberlin-OPF-24_54628002_aa.jpg

Stock No.:

54628002

Used Oberlin OPF-24 Pressure Filtration System – Up to 960 GPM

Used- Oberlin Model OPF-24 Fully Automatic Horizontal Pressure Filtration System. Serial/configuration OPF24-167MD. Features 24 square feet (2.23 m) of filtration area with nominal capacity up to 960 GPM on certain water-based applications or 400 GPM on 200-SSU oil. Rated for 45 psi maximum filter pressure, 115 psi maximum air supply pressure and 160 F maximum liquid temperature. Automatic cycle includes pressure filtration, cake formation, air drying, media advancement and dry-cake discharge using disposable filter media or a reusable cleanable belt. Approximate footprint: 145" L x 77" W x 82" H.

MFR: Oberlin

https://ww2.aaronequipment.com/Images/ItemImages/Centrifuges/Decanter/Bird-3600_54630002_aa.jpg

Stock No.:

54630002

Used Bird 3600 Stainless Steel Decanter Centrifuge – 24" x 60" Bowl, 30 HP with Hard-Faced Scroll

Used Bird 3600 Stainless Steel Decanter Centrifuge 24" x 60" Bowl, 30 HP with Hard-Faced Scroll. Stainless steel construction in product contact areas. Features a 30 HP, 575V motor. Equipped with scroll featuring hard-faced flights and stellite feed nozzles for improved wear resistance. Includes discharge chute and belt guard, hydraulic power pack, and MCC control panel. Designed for continuous solid/liquid separation, clarification, solids recovery, and dewatering applications.

MFR: Bird

https://ww2.aaronequipment.com/Images/ItemImages/Centrifuges/Decanter/Bird-3600_54630003_aa.jpg

Stock No.:

54630003

Used Bird 3600 Industrial Dewatering Centrifuge – 24" x 60" Stainless Bowl with Wear-Resistant Scroll

Used Bird 3600 Industrial Dewatering Centrifuge 24" x 60" Stainless Bowl with Wear-Resistant Scroll. Stainless steel construction in product contact areas. Features a 30 HP, 575V motor. Equipped with scroll featuring hard-faced flights and stellite feed nozzles for improved wear resistance. Includes discharge chute and belt guard, hydraulic power pack, and MCC control panel. Designed for continuous solid/liquid separation, clarification, solids recovery, and dewatering applications.

MFR: Bird

https://ww2.aaronequipment.com/Images/ItemImages/Feeders/Vibratory/Carrier-FC2410051-4304_71239_aa.jpg

Stock No.:

71239

Used Carrier Ampli-Flow Vibrating Feeder – Model FC2410051/4304, Stainless Steel

Used- Carrier Vibrating Equipment Ampli-Flow Vibrating Feeder, Model FC2410051/4304, Stainless Steel. 24" wide x 72" long, single deck with scalper type insert. Driven by an approximate 1 hp motor.

MFR: Carrier

https://ww2.aaronequipment.com/Images/ItemImages/Mixers/Plow-Mixer/American-Process-Systems-TD-24_79477_aa.jpg

Stock No.:

79477

Used - American Process TD-24 Cylindrical Plow Mixer, 24 Cu. Ft., Stainless Steel

Used- American Process Cylindrical Plow Mixer, Model TD-24, Approximate 24 Cubic Feet Working Capacity, Stainless Steel. Non-jacketed chamber 30" diameter x 84" long, shaft with fixed plows and end scrapers. Driven by a 30 hp, 3/60/460 volt, 1780 rpm motor thru a Sew reducer, ratio 15.77 to 1. Openings top, (2) side access doors, center bottom outlet. Serial # 4433.

MFR: American Process Systems

https://ww2.aaronequipment.com/Images/ItemImages/Mixers/Plow-Mixer/American-Process-Systems-TD-24_79478_aa.jpg

Stock No.:

79478

Used American Process TD-24 Mixer - 24 Cu. Ft. Capacity, Fixed Plows

Used- American Process Model TD-24 Cylindrical Plow Mixer, Approximate 24 Cubic Feet Working Capacity, Stainless Steel. Non-jacketed chamber 30" diameter x 84" long, shaft with fixed plows and end scrapers. Driven by a 30 hp, 3/60/460 volt, 1780 rpm motor thru a Sew reducer, ratio 15.77 to 1. Openings top, (2) side access doors, center bottom outlet. Serial # 4431.

MFR: American Process Systems

Sell Equipment

Have surplus equipment? We offer flexible options including direct purchase, consignment, or listing on our marketplace — all backed by trusted professionals.

Buy Used Equipment

Discover one of the world’s largest inventories of used processing and packaging equipment — ready to ship and backed by decades of industry expertise.

Auctions

Join global buyers and sellers at AIS-hosted auctions featuring top-quality surplus equipment from leading facilities around the world.