Food and Beverage Equipment

Used 2,000 Gallon Santa Rosa Stainless Steel Jacketed Vertical Tank – 20 PSI MAWP, Three-Zone

Used 2,000 Gallon Santa Rosa Stainless Steel Jacketed Vertical Tank 20 PSI MAWP, Three-Zone. Overall height is 240" tall on four legs. Main shell is 66" OD x 125" straight side. Long bottom cone has two 1" threaded jacket fittings and one 2" tri clamp bottom fitting. Side has four 1" threaded fittings for the jacket, one 3" tri clamp, one 2" tri clamp, one 16" x 20" elliptical manway and two 1" threaded couplings for probes. Top has 3- 2" tri clamp fittings. Cone length 53" long.

MFR: Santa Rosa

Unused Meridian 20,000 Gallon Stainless Steel Tank | 304SS Vertical Storage Vessel

Unused Meridian 20,000 Gallon Stainless Steel Tank. Constructed of 304 stainless steel with a vertical, single-wall design featuring a slight dished top and sloped bottom. Approximate dimensions are 162" diameter x 204" straight side. Top openings include (1) 25" manway, (1) 22" opening, (1) 3" nozzle, and (1) 2" nozzle. Side openings include (1) 25" manway, (1) 3" nozzle, and (1) 1" nozzle. Suitable for a wide range of storage applications including liquid fertilizers and agricultural chemicals, food and beverage ingredients such as syrups, edible oils, and sweeteners, industrial and process liquids where stainless steel construction and large storage capacity are required, and water or wastewater equalization and storage where 304 stainless steel offers excellent corrosion resistance and long service life.

MFR: Meridian MFG

Cataract Steel Industries Shell and Tube Heat Exchanger

Used- Cataract Steel Industries Shell and Tube Heat Exchanger, Model SG-33006-SETT, Approximate 21.2 Square Feet. Carbon steel shell rated 60 psi at -20 to 300 degrees F. (27) 3/4" diameter x 48" long 316L Stainless steel tubes rated 100 psi at -20 to 300 degrees F. Openings: (2) 6", (2) 2", (2) 3/4". Side lug mounted. National Board# 4639, Serial# 33006, built 2013. No top or bottom heads, Flange cut on one side.

Luwa 21.6 Sq. Ft. 316L Stainless Steel Thin Film Evaporator

Used Luwa Model NL3-300/2200/HT vertical thin-film evaporator with 21.6 square feet of heat-transfer surface and 316L stainless steel construction. The evaporator measures 12" in diameter x 96" long in two sections and features a three-star Type L rotor, radial separator, mechanical seal, conical bottom with 2" diameter discharge, and 12" diameter vapor outlet. The internal chamber is rated for full vacuum at 365 F, and the jacket is rated for approximately 150 psi at 365 F. Driven by a 7.5 horsepower belt-drive motor rated for 230/460 volts, 3 phase, 60 hertz, and 1,720 revolutions per minute. Support ring is missing. Possible applications include evaporation, concentration, solvent recovery, stripping, and separation of suitable heat-sensitive, viscous, chemical, food, pharmaceutical, and specialty process products.

MFR: Luwa

Used - Buss Paddle Rotary Vacuum Dryer (6000L) – Stainless Steel, Industrial-Grade

Used- Buss Paddle Rotary Vacuum Dryer. (6000 liter) 211 cubic foot working capacity. 316L stainless steel contact parts. 1600mm (62.992") diameter x 4100 mm (161.417") long, dished ends. Rated internal vacuum jacket 2 bar. Openings: top 18", (2) 4-3/4" sightglass; side (2) 11" x 15" inspection doors. Center plug valve outlet 9-1/2". Bare shafted. Driven By 11 Kw 6 RPM Fixed Gear Motor Drive. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Buss

4 Pass U Tube Shell & Tube Heat Exchanger

Unused- 4 Pass U Tube Shell & Tube Heat Exchanger, Approximate 2140 Square Feet, Tema Type AEU, Carbon Steel, Horizontal. Shell rated 412psi/Full Vacuum at 392 degrees F., (231) 3/4" diameter x 288" long tubes rated 372psi/Full Vacuum at 392 degrees F. Openings shell (2) 4", (2) 6", openings for tubes (2) 2", (2) 4". Mfg: Ilsung Corporation. Serial# 14-HE-056, National Board# 2040, built 2015. OAD 346"L X 38"W X 74"T, 17633 lbs. Documents available. Nitrogen purged by manufacturer after testing and prior to storage.

MFR: Ilsung Corporation

Unused 4-Pass U-Tube Shell & Tube Heat Exchanger – 2,140 Sq. Ft., Carbon Steel

Unused- 4 Pass U Tube Shell & Tube Heat Exchanger, Approximate 2140 Square Feet, Tema Type AEU, Carbon Steel, Horizontal. Shell rated 412psi/Full Vacuum at 392 degrees F., (231) 3/4" diameter x 288" long tubes rated 372psi/Full Vacuum at 392 degrees F. Openings shell (2) 4", (2) 6", openings for tubes (2) 2", (2) 4". Mfg: Ilsung Corporation. Serial# 14-HE-059, National Board# 2043, built 2015. OAD 346"L X 38"W X 78"T, 18018 lbs. Documents available. Nitrogen purged by manufacturer after testing and prior to storage.

MFR: Ilsung Corporation

2140 Square Feet, Unused- 4 Pass U Tube Shell & Tube Heat Exchanger

Unused- 4 Pass U Tube Shell & Tube Heat Exchanger, Approximate 2140 Square Feet, Tema Type AEU, Carbon Steel, Horizontal. Shell rated 412psi/Full Vacuum at 392 degrees F., (231) 3/4" diameter x 288" long tubes rated 372psi/Full Vacuum at 392 degrees F. Openings shell (2) 4", (2) 6", openings for tubes (2) 2", (2) 4". Mfg: Ilsung Corporation. Serial# 14-HE-061, National Board# 2045, built 2015. OAD 346"L X 38"W X 78"T, 18018 lbs. Documents available. Nitrogen purged by manufacturer after testing and prior to storage.

MFR: Ilsung Corporation

Unused 4-Pass U-Tube Shell & Tube Heat Exchanger – 2,143 Sq. Ft., Carbon Steel

Unused 4 Pass U Tube Shell & Tube Heat Exchanger, Approximate 2143 Square Feet, Tema Type AEU, Carbon Steel, Horizontal. Shell rated 412psi/Full Vacuum at 392 degrees F., (231) 3/4" diameter x 288" long tubes rated 372psi/Full Vacuum at 392 degrees F. Openings shell (2) 4", (2) 6", openings for tubes (2) 2", (2) 4". Mfg. Ilsung Corporation, Serial# 14-HE-040, National Board# 2024, built 2014. OAD 346"L X 38"W X 76"T, 17633 lbs. Documents available. Nitrogen purged by manufacturer after testing and prior to storage.

MFR: Ilsung Corporation

Shell & Tube Heat Exchanger – 4-Pass, 2143 Sq. Ft. High-Pressure

Unused- 4-Pass U Tube Shell & Tube Heat Exchanger, Approximate 2143 Square Feet, Tema Type AEU, Carbon Steel, Horizontal. Shell rated 412psi/Full Vacuum at 392 degrees F., (231) 3/4" diameter x 288" long tubes rated 372psi/Full Vacuum at 392 degrees F. Openings shell (2) 4", (2) 6", openings for tubes (2) 2", (2) 4". Mfg: Ilsung Corporation. Serial# 14-HE-041, National Board# 2025, built 2014. OAD 346"L X 38"W X 76"T, 18018 lbs. Documents available. Nitrogen purged by manufacturer after testing and prior to storage.

MFR: Ilsung Corporation

Carbon Steel U-Tube Shell & Tube Heat Exchanger – 4-Pass, 2143 Sq. Ft.

Unused U-Tube 4 Pass Shell & Tube Heat Exchanger, Approximate 2143 Square Feet, Tema Type AEU, Carbon Steel, Horizontal. Shell rated 412psi/Full Vacuum at 392 degrees F., (231) 3/4" diameter x 288" long tubes rated 372psi/Full Vacuum at 392 degrees F. Openings shell (2) 4", (2) 6", openings for tubes (2) 2", (2) 4". Mfg: Ilsung Corporation. Serial# 14-HE-042, National Board# 2026, built 2014. Overall dimensions 346"L X 38"W X 76"T. Approximately 18,000 lbs. Documents available. Nitrogen purged by manufacturer after testing and prior to storage.

MFR: Ilsung Corporation

Ilsung Corporation 4-Pass Heat Exchanger – 2143 Sq. Ft., Built 2015

Unused- Shell & Tube 4-Pass Heat Exchanger, U-Tube Style, Approximate 2143 Square Feet, Tema Type AEU, Carbon Steel, Horizontal. Shell rated 412psi/Full Vacuum at 392 degrees F., (231) 3/4" diameter x 288" long tubes rated 372psi/Full Vacuum at 392 degrees F. Openings shell (2) 4", (2) 6", openings for tubes (2) 2", (2) 4". Mfg: Ilsung Corporation. Serial# 14-HE-045, National Board# 2029, built 2014. Dimensions 346"L X 38"W X 76"T. 18018 lbs. Documents available. Nitrogen purged by manufacturer after testing and prior to storage.

MFR: Ilsung Corporation