Food and Beverage Equipment

Used 250 gallon APV Crepaco Dixie style medium shear mixer. Stainless steel food grade construction. Vessel is 40" diameter x 60" straight side length with approximately 6" dished top and bottom. The...

Used-250 gallon APV Crepaco Dixie style medium shear mixer. Stainless steel food grade construction. Vessel is 40" diameter x 60" straight side length with approximately 6" dished top and bottom. The bottom has a 3" and a 4" tri clamp ports. The top has one 18" manway w/lid. One sprayball (1.5" tri clamp) One 2" connection to the breather. Two each 1.5" and Five each 2" tri clamp connections. It has the standard 3 wheel, centrifugal fan type impellers. The drive is missing. The vessel is mounted in a stainless steel bar grate platform that is 65" x 113.5" x 57.5" high. The over all dimensions are 65"w x 113.5"l x 100.5" tall. Serial number K-0149. Good condition.

MFR: APV/Crepaco

Used Carman Vibrating Fluid Bed Dryer, also including a Blower Unit and an Electric Process Air Heater. Carman Fluid Bed Model FB-50, equipped with 2 vibrators of 1 hp, Single zone, 11" wide x 72" ...

Used Carman Vibrating Fluid Bed Dryer, also including a Blower Unit and an Electric Process Air Heater. Carman Fluid Bed Model FB-50, equipped with 2 vibrators of 1 hp, Single zone, 11" wide x 72" long perforated bed. The Unit overall dimensions are 44'' x 93'' x 75''. The serial Number is FB-10522. There is no ductwork, controls stands or springs included. Stainless steel contact parts. The Supply-Side Equipment: - New York Blower Co. series 20GI FAN 194 LS. Driven by a 15hp Weg Motor, 1760 rpm. Power required 208-230/ 460 vac3. The Unit dimensions are 61" x 62" x 46". - Process Air Heater CAT no. 164x221428. Has an outlet Temperature of 575 F. 150kw. Power required 460 vac3. The Unit overall dimensions are 50" x 100" x 45". All these items are insulated and appear to be in good condition.

MFR: Carman

Used Becker Pumps Corp oil flooded rotary vane vacuum pump. Model U4.400 SA/K. Vacuum pump has a pumping speed of 283 cfm and a vacuum to 2.5 Torr. Pump has a 3" NPT inlet and a 4" NPT outlet. The pu...

Used-Becker Pumps Corp oil flooded rotary vane vacuum pump. Model U4.400 SA/K. Vacuum pump has a pumping speed of 283 cfm and a vacuum to 2.5 Torr. Pump has a 3" NPT inlet and a 4" NPT outlet. The pump is driven by a 15 hp 1165 rpm motor. Serial number 1469721. Requires 230/460 vac 3 phase electrical supply.

Used Stokes Vacuum Shelf Dryer, Model #338-4. Max operating pressure is 50 PSI. The dryer has 14 steam ports on 3.5" vertical centers and the door has one-6” opening, one -9" diameter sight glasses, ...

Used-Stokes Vacuum Shelf Dryer, Model #338-4. Max operating pressure is 50 PSI. The dryer has 14 steam ports on 3.5" vertical centers and the door has one-6” opening, one -9" diameter sight glasses, and one-8” opening. There are no shelves included. There are also two inspection windows missing. Inside dimensions 49.5" wide x 49.25" tall x 45.5" deep. Serial # P-77304. Overall 70” x 66” x 80”. This would make a nice vacuum chamber.

MFR: Stokes

Used ACS Ancaster Conveying Systems model MD 8" QC-R-SS stainless steel sanitary rotary air lock. It has (8) 3" talll vanes on its rotor. The rotor assembly is polished to 150-180 grit finish. It ha...

Used-ACS Ancaster Conveying Systems model MD 8" QC-R-SS stainless steel sanitary rotary air lock. It has (8) 3" talll vanes on its rotor. The rotor assembly is polished to 150-180 grit finish. It has 8" inside diameter inlet/outlet flanges. Quick clean design has removable end that slides on guides for easy clean out. Also has air purge seals. Driven by 1 hp WEG motor and gearbox assembly that turns vanes at 20 rpm. Requires 208-230/460 vac 3 ph electrical supply. Good Condition. Low hours, project cancelled.

Used ACS Ancaster Conveying Systems model MD 8" QC-R-SS stainless steel sanitary rotary air lock. It has (8) 3" talll vanes on its rotor. The rotor assembly is polished to 150-180 grit finish. It ha...

Used-ACS Ancaster Conveying Systems model MD 8" QC-R-SS stainless steel sanitary rotary air lock. It has (8) 3" talll vanes on its rotor. The rotor assembly is polished to 150-180 grit finish. It has 8" inside diameter inlet/outlet flanges. Quick clean design has removable end that slides on guides for easy clean out. Also has air purge seals. Driven by 1 hp WEG motor and gearbox assembly that turns vanes at 20 rpm. Requires 208-230/460 vac 3 ph electrical supply. Good Condition. Low hours, project cancelled.

Used VAV Scan vibratory Conveyor. Stainless steel construction. Conveyor pipe of 16" diameter and 148" long.Has clean openings on boths ends. The unit has three 6" inlets/outles and two 12" inlets/...

Used VAV Scan vibratory Conveyor. Stainless steel construction. Conveyor pipe of 16" diameter and 148" long.Has clean openings on boths ends. The unit has three 6" inlets/outles and two 12" inlets/outlets. ith 2 vibro motor, 1200 rpm each. Has a support floor mounting with 4 springs and 4 schocks absorbant. 38" in the tall end and 10" in the short end. The unit number is : 29751 and year: 1991.

Used VAV Scan vibratory Conveyor. Stainless steel construction. Conveyor pipe of 16" diameter and 148" long. Has clean out openings on boths ends. The unit has three 6" inlets/outles and two 12" inl...

Used VAV Scan vibratory Conveyor. Stainless steel construction. Conveyor pipe of 16" diameter and 148" long. Has clean out openings on boths ends. The unit has three 6" inlets/outles and two 12" inlets/outlets. Equipped with 2 vibro motors, 1200 rpm each. Has a support floor mounting with 4 springs and 4 schocks absorbant. 41" in the tall end and 8 1/2" in the short end. The unit number : 29759 and year: 1991.

Used Fluid Air PolarDry 050 Electrostatic Spray Dryer – 50 kg/hr

Used- Fluid Air PolarDry Model 050 Electrostatic Spray Dryer 50 Kg/Hr Evaporation Capacity. Designed for GMP processing with nitrogen drying and atomizing gas. Rated for maximum evaporation capacity of 50 kg/hr, maximum drying gas inlet temperature of 140 C, maximum drying gas flow of 1,870 m/hr, and design vacuum of 12 kPa. Atomizing gas specifications include maximum inlet temperature of 150 C, maximum pressure of 4.14 bar, and design flow of 100 m/hr. Features stainless steel spray chamber with FDA-approved PTFE liner, electrostatic atomization technology, pneumatic powder collection and conveying system, (3) reverse-pulse cartridge filters, HEPA filtration, dehumidification coil, drying gas heater, blower, and oxygen monitoring safety system. Equipped with Watson Marlow peristaltic feed pump, Allen-Bradley PLC with Batch Architect control system, operator HMI, stainless steel process skid, and elevated access platform with stairs. Product contact surfaces include 316L stainless steel and FDA-approved PTFE. Electrical requirements include 480V, 3-phase, 60 Hz. Possible applications include pharmaceutical, nutraceutical, biotechnology, food ingredient, and specialty chemical spray drying of compatible liquid formulations into powdered products.

MFR: Fluid Air

Used Fluid Air PolarDry Model 001 Laboratory Electrostatic Spray Dryer, 1 kg/hr

Used- Fluid Air PolarDry Model 001 Electrostatic Spray Dryer, 1 Kg/Hr Evaporation Capacity. Designed for cGMP laboratory, research and development, and pilot-scale processing of aqueous feedstocks. Rated for maximum evaporation capacity of 1 kg/hr with (1) electrostatic atomizing nozzle, maximum nitrogen drying gas inlet temperature of 140 C, drying gas flow of 43 Nm/hr, maximum atomizing gas temperature of 150 C, and maximum atomizing gas pressure of 552 kPa. Features 316L stainless steel and ULTEM machine tower construction, FDA-approved acrylic spray chamber, (2) 5-micron polyester cartridge filters with 316 stainless steel wire mesh and reverse-pulse cleaning, HEPA exhaust filtration, electric drying gas heater, brushless DC blower, and 1-liter glass powder collection system. Equipped with Watson Marlow 313 peristaltic feed pump with 6220 RPM operating range, AccuJet electrostatic nozzle controller, Allen-Bradley PLC with Batch Architect controls, operator touchscreen HMI, nitrogen inerting system, and integrated safety monitoring. Electrical requirements: 208240V, single phase, 50/60 Hz, 30 amps. Compact, portable stainless steel design. Possible applications include laboratory spray drying, powder formulation development, microencapsulation, pharmaceutical research, nutraceutical development, and processing of compatible aqueous food and specialty ingredient formulations.

MFR: Fluid Air

Used Dr. Pharm LD-300 300 Liter Stainless Steel Blending Bin

Used Dr. Pharm LD-300 Stainless Steel Blending Bin. Featuring enclosed product container, removable top cover with gasket, conical bottom discharge with manual butterfly valve, heavy-duty tubular stainless steel frame and casters for mobility. The LD-300 designation corresponds to a 300-liter class blending bin used with solid-dose processing equipment. Possible applications and suitable products include contained handling, blending, storage and transfer of pharmaceutical powders, granules and other dry solid products.

Dr. Pharm LD-300 Stainless Steel IBC Blending and Transfer Bin

Used Dr. Pharm Stainless Steel Blending Bin, Model LD-300. Featuring enclosed product container, removable top cover with gasket, conical bottom discharge with manual butterfly valve, heavy-duty tubular stainless steel frame and casters for mobility. The LD-300 designation corresponds to a 300-liter class blending bin used with solid-dose processing equipment. Possible applications and suitable products include contained handling, blending, storage and transfer of pharmaceutical powders, granules and other dry solid products.