Cosmetics Equipment

Hamilton 200 Gallon Triple Motion Stainless Steel Kettle

Used- Hamilton 200 Gallon Triple Motion Stainless Steel Kettle. 48" dia x 36" deep. Hemispherical bottom. Side/bottom scrape triple agitation with pivoting bridge. Jacket rated 125 PSI @ 345 Deg F. 5HP drive, 3/50/60/230/460V. Split stainless lids. 3" Tri-Clamp discharge fitting. Serial# 2475, National Board# A8223. Last used in food.

MFR: Hamilton

Used Aaron Process 200 Gallon (26.74 cubic feet) capacity Vacuum Drying Sigma Mixer – All Stainless, 125 HP, Jacketed, ASME

Used Aaron Process 200 Gallon (26.74 cubic feet) capacity Vacuum Drying Sigma Mixer All Stainless, 125 HP, Jacketed, ASME. Cored shafts, jacketed trough, and double nobben blades. Model MBG200-125 All stainless steel construction. All parts are insulated and sheathed with 304 Stainless steel and polished to 150 - 180 grit finish. Mixing/drying chamber includes vacuum cover and is jacketed, rated for 200 PSI at 450 degrees Fahrenheit / negative 20 degrees Fahrenheit, ASME code constructed. Mixing chamber measures 48" x 40" x 44" deep and includes (2) 6" diameter flanged discharges with ball valves. Blades are overlapping double nobben blades and driven by 125 HP motor thru heavy duty gearbox, 160 Amps and 460 volts. Manufactured in 2000. Serial number 00200125643MBG. Previously used in clean room type environment. Complete with control panel and unitized on heavy duty frame. Includes main control panel, power panel with starters and VFD's, steam-to-water heat exchanger for heating of jacket and hydraulic pump/reservoir for opening vessel lid. Also includes top mounted, stainless steel Mikro Pulsaire dust collector, Model 10-2-FV TR.

MFR: Aaron Process

Used Air Classifier Mill | 200 HP Industrial Milling & Powder Processing System

Used Air Classifier Mill | 200 HP Industrial Milling & Powder Processing System. With TECO-Westinghouse 200 HP Mill Drive Motor and Toshiba 25 HP Classifier Motor. Last used on guar beans for making fracking lubricant.

Used 200 Gallon Stainless Steel Vertical Mix Tank – Propeller Agitated, Leg Moun

Used 200 Gallon Mix Tank, Stainless Steel, Vertical. Approximately 48" diameter, 24" straight side. Flat top (with cover), Dished bottom. Clamp-on Top entering 3-blade propeller-style agitator, driven by a 3/4hp, 3/60/208-230/460 volt, 1725rpm washguard motor. Opening Top: 2", 2-1/2" diameter. 2" Center bottom outlet with 14" discharge height. Mounted on (3) stainless steel legs. No Manufacturer Tag.

MFR: Unknown

Used U.S. Filter Company Auto jet self cleaning (rotating leaves) vertical pressure leaf filter. This unit is insulated for chill filtering. It has 16 each 34" rotating leaves vertical mounted filtra...

Used U.S. Filter Company Auto jet self cleaning (rotating leaves) vertical pressure leaf filter. This unit is insulated for chill filtering. It has 16 each 34" rotating leaves vertical mounted filtration screens on a horizontal rotating shaft. Quick openning head. 2.5" and 3.5" Inlet and 6'' diameter discharge. Driven by 1/2 hp a Duty Master Motor 1725 RPM. Requires 230/460 vac 3 ph. The Unit has 68" x 84" overall width and length and 87" overall height. Shell tested as 304 stainless.

MFR: US Filter

Used Micro Air RP8 Dust Collector – High Capacity Industrial Air Filtration System

Used Micro Air Model RP8 Dust Collector. Up to 2,000 square feet of filter area. (8) Cartridges. 10 HP Blower. 3,500 to 5,000 CFM (depending on set-up). 3/60/208/230/460V.

MFR: Micro Air

Buy Used Micro Air RP8 Dust Collector – 2,000 Sq Ft Filter Area System

Used Micro Air Dust Collector, Model RP8. Up to 2,000 square feet of filter area. (8) Cartridges. 10 HP Blower. 3,500 to 5,000 CFM (depending on set-up). 3/60/208/230/460V.

MFR: Micro Air

2000 Gallon Hastelloy C-276 mix tank

Used- 2000 Gallon Hastelloy C-276 mix tank. Dish top and bottom. Built By Addison Fab. 6' dia. x 9' T/T. Lightnin 3/4 HP mixer, 208-220/440 volt. Lug mounted. Rated 10" WC @ 250 Deg.F. Alloy

Unused 2,000 Gallon 316 Stainless Steel Process Tank with Side Scrape Mixer

Unused TSI 2,000 Gallon Vertical Stainless Steel Agitated Tank. 316 Stainless steel. Approximately 84" diameter x 72" straight side. Dished top and bottom. Stainless steel top agitator bridge with top entering counter rotating anchor style agitator with side scrapers and inner flat bars (1/2" x 4"), bottom supported, driven by a 5//3 hp, 3 phase/60//50hz, 230/460 - 190/380 volt 1750/1450 rpm motor, and a 7.5//5 hp, 3phase/60//50hz, 230/460 - 190/380 volt, 1770/1475 rpm motor through a reducer 8.48:1 ratio. 18" Top manway. 3" Center bottom outlet, approximate 56-1/4" discharge height. Mounted on (4) stainless steel legs. Drawing available. Manufactured by (TSI) Todd Street Inc Stainless Steel Fabricators. Overall dimensions approximately 84" x 96" x 192"tall. Ideal for food, cosmetic, pharmaceutical, chemical, and specialty product processing applications.

Used 2,000 gallon Santa Rosa Stainless Steel vertical tank with three zone 20 PSI MAWP jacket. Overall height is 240" tall on four legs. Main shell is 66" OD x 125" straight side. Long bottom cone ha...

Used-2,000 gallon Santa Rosa Stainless Steel vertical tank with three zone 20 PSI MAWP jacket. Overall height is 240" tall on four legs. Main shell is 66" OD x 125" straight side. Long bottom cone has two 1" threaded jacket fittings and one 2" tri clamp bottom fitting. Side has four 1" threaded fittings for the jacket, one 3" tri clamp, one 2" tri clamp, one 16" x 20" elliptical manway and two 1" threded couplings for probes. Top has 3- 2" tri clamp fittings. Cone length 53" long.

MFR: Santa Rosa

Used 2,000 gallon stainless steel vertical jacketed tank with cone bottom and dished top on four legs. Tank is 72" ID x 99.5" straight side. Side has 20" x 16" eliptical manway, one 3/4" tri clamp no...

Used-2,000 gallon stainless steel vertical jacketed tank with cone bottom and dished top on four legs. Tank is 72" ID x 99.5" straight side. Side has 20" x 16" eliptical manway, one 3/4" tri clamp nozzle, two 3/4" copper pipes to the jacket. Dished top has one 2" tri clamp nozzle and one 3/4" tri clamp nozzle to a spray ball. Cone has two 1-1/2" tri clamp nozzle. Cone is 35" length. Top has four lift lugs. Manufactured by Modern Brewing & Design Inc.

Used 2000 gallon stainless steel vertical mix tank equipped with a top-mounted Philadelphia Mixers agitator that has pitched blade turbines to allow for maximum axial flow. Tank vessel is rectangular...

Used-2000 gallon stainless steel vertical mix tank equipped with a top-mounted Philadelphia Mixers agitator that has pitched blade turbines to allow for maximum axial flow. Tank vessel is rectangular with a straight side length of 132" and a width of 60". Agitator driven by a 15 hp, 1760 rpm motor that requires 230/460 vac, 3 ph electricity. Discharge has a Worcester model 3-416-T-151 ball valve with 3" outlet. There are two 63" w x 21.5" l hinged lids for mainetenance/operation at the top. Tank has some dried paint residue inside.

MFR: Philadelphia