Contract Pharmaceutical Equipment
Stock No.:
44974Used Werner & Pfleiderer UK17 Double Arm Mixer – 200 Gal, Stainless Steel Clad, Jacketed
Used- Werner & Pfleiderer Double Arm Mixer, Model UK17, Stainless Steel Clad 200 Gallon. Sigma tangential blades, jacketed bowl (bottom only) 43" front-back x 53" left-right x approximately 36" deep. Geared both ends. Set up for hydraulic tilt 7.5 hp, 220/440V, 1750 rpm. No base, no drive. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.
MFR: Werner & Pfleiderer
Stock No.:
50059005Used Howard 200 Gallon Double Arm Mixer – 304 Stainless Steel, Hydraulic Tilt
Used- Howard Double Arm Mixer, Approximate 200 Gallon, 304 Stainless Steel. Non-jacketed bowl approximate 50" left to right x 44-1/8" front to back x 34-1/2" deep. Overlapping sigma blades set up for hydraulic drive, no power pack. Dual ram hydraulic tilt, top safety grate. Mounted on a stainless steel frame. Serial# H3649-2, built 2001.
MFR: Howard
Stock No.:
50823099Used 600 HP Schutte-Buffalo Hammermill with Twin City Blower, Heavy-Duty
Used- Schutte-Buffalo-Astec Model AHM-20 Carbon Steel Hammermill. Approximate 48" diameter x 50" wide rotor. Top feed with hopper, bottom discharge. Driven by a 600 HP, 3/60/460 volt, 1790 rpm motor. Mounted on a frame. Serial# 16088HM1. Includes a Twin City blower, Type RBR-SW, size 926, driven by a 200 HP, 3/60/230/460 volt, 1785 rpm motor. Astec serial# 16088HM1.
MFR: Schutte
Stock No.:
51065004Ross Model HDM 200 Double Planetary 200 Gallon Mixer
Used- Ross Double Planetary Mixer, Model HDM 200. 30-200 Gallon working capacity. (2) Carbon Steel Stirrers approximate orbital speed 24 rpm, stirrer speed 26 rpm. Top dust hood with charge port, bottom fume hood, hydraulic lift with power pack. Includes (1) 44'' diameter x 33-3/4'' deep can. Driven an 40 HP, 3/60/460 VOLT, 1740 rpm XP motor, thru Delroyd model HV120 reduction gear, 74.21 to 1 ratio. Mounted on an I beam frame. Serial# 35555. Additional mix cans available for purchase at additional cost, subject to availability.
MFR: Charles Ross
Stock No.:
51258020Used Industrial Ribbon Blender, 200 Cubic Foot, Stainless Steel, 50 HP with Rotary Valve
Used Stainless Steel Double Spiral Ribbon Blender. Approximate 200 cubic foot capacity. Has top cover and (2) bag dump stations. 50 HP motor & reducer. Center bottom outlet with rotary valve.
Stock No.:
52905003Hamilton 200 Gallon Triple Motion Stainless Steel Kettle
Used- Hamilton 200 Gallon Triple Motion Stainless Steel Kettle. 48" dia x 36" deep. Hemispherical bottom. Side/bottom scrape triple agitation with pivoting bridge. Jacket rated 125 PSI @ 345 Deg F. 5HP drive, 3/50/60/230/460V. Split stainless lids. 3" Tri-Clamp discharge fitting. Serial# 2475, National Board# A8223. Last used in food.
MFR: Hamilton
Stock No.:
53147035Used Cherry-Burrell 200 Gallon Stainless Steel Jacketed Processor Tank – Scrape Surface Agitation
Used- Cherry-Burrell 200 Gallon Cone-Bottom Stainless Steel Jacketed Processor Tank with Scrape Surface Agitation. Vessel measures 48" diameter x 30" deep with bridge mount agitation, hinged lids, and 2-1/2" center bottom outlet with tri-clamp connection. Agitator is driven by 3 HP, 230/460V, 3/60 Hz, 1700 RPM motor thru right-angle gearbox with 85.65:1 ratio, resulting in 20 output RPM. Vessel includes self contained heating system for jacket with an electrically heated inline heater and small centrifugal circulation pump. Unitized on stainless steel frame with (4) legs. Serial number E-524-9. Previously used at dairy processing facility.
MFR: Cherry Burrell
Stock No.:
53147081Used Aaron Process 200 Gallon (26.74 cubic feet) capacity Vacuum Drying Sigma Mixer – All Stainless, 125 HP, Jacketed, ASME
Used Aaron Process 200 Gallon (26.74 cubic feet) capacity Vacuum Drying Sigma Mixer All Stainless, 125 HP, Jacketed, ASME. Cored shafts, jacketed trough, and double nobben blades. Model MBG200-125 All stainless steel construction. All parts are insulated and sheathed with 304 Stainless steel and polished to 150 - 180 grit finish. Mixing/drying chamber includes vacuum cover and is jacketed, rated for 200 PSI at 450 degrees Fahrenheit / negative 20 degrees Fahrenheit, ASME code constructed. Mixing chamber measures 48" x 40" x 44" deep and includes (2) 6" diameter flanged discharges with ball valves. Blades are overlapping double nobben blades and driven by 125 HP motor thru heavy duty gearbox, 160 Amps and 460 volts. Manufactured in 2000. Serial number 00200125643MBG. Previously used in clean room type environment. Complete with control panel and unitized on heavy duty frame. Includes main control panel, power panel with starters and VFD's, steam-to-water heat exchanger for heating of jacket and hydraulic pump/reservoir for opening vessel lid. Also includes top mounted, stainless steel Mikro Pulsaire dust collector, Model 10-2-FV TR.
MFR: Aaron Process
Stock No.:
53267143Used Air Classifier Mill | 200 HP Industrial Milling & Powder Processing System
Used Air Classifier Mill | 200 HP Industrial Milling & Powder Processing System. With TECO-Westinghouse 200 HP Mill Drive Motor and Toshiba 25 HP Classifier Motor. Last used on guar beans for making fracking lubricant.
Stock No.:
54280002Used 200 Gallon Stainless Steel Vertical Mix Tank – Propeller Agitated, Leg Moun
Used 200 Gallon Mix Tank, Stainless Steel, Vertical. Approximately 48" diameter, 24" straight side. Flat top (with cover), Dished bottom. Clamp-on Top entering 3-blade propeller-style agitator, driven by a 3/4hp, 3/60/208-230/460 volt, 1725rpm washguard motor. Opening Top: 2", 2-1/2" diameter. 2" Center bottom outlet with 14" discharge height. Mounted on (3) stainless steel legs. No Manufacturer Tag.
MFR: Unknown
Stock No.:
10128084Used 2,000 Gallon SS Vertical Jacketed Tank – Cone Bottom, Dished Top, Manway, Modern Brewing
Used 2,000 Gallon SS Vertical Jacketed Tank Cone Bottom, Dished Top, Manway, Modern Brewing. Tank is 72" ID x 99.5" straight side. Side has 20" x 16" eliptical manway, one 3/4" tri clamp nozzle, two 3/4" copper pipes to the jacket. Dished top has one 2" tri clamp nozzle and one 3/4" tri clamp nozzle to a spray ball. Cone has two 1-1/2" tri clamp nozzle. Cone is 35" length. Top has four lift lugs. Manufactured by Modern Brewing & Design Inc.
