Contract Packaging Equipment

Used Alloy Manufacturing Co. 1832 gallon vertical INCONEL 600 tank. INCONEL 600 is used in applications which require resistance to corrosion and heat. This tank has a flat top and a sloped bottom. T...

Used-Alloy Manufacturing Co. 1832 gallon vertical INCONEL 600 tank. INCONEL 600 is used in applications which require resistance to corrosion and heat. This tank has a flat top and a sloped bottom. The tank diameter is 76", the overall height is 125", the straight side height is 90", and the slope is 6". The top has an 18" manway, a 2" Tri-clamp, and a 1" NPT. The side has (3) 1/2" NPT, (1) 1/2" flange, and (1) 2" NPT. The bottom has a 2" diameter flanged discharge 10.5" from the ground. The overall dimensions are 80" diameter x 125" tall. Last used for beverage alcohol.

Used 1850 Gallon Waukesha Cherry-Burrell Stainless Steel Tank with Tri-Clamp Discharge

Used- 1850 Gallon Waukesha Cherry Burrell 316 Stainless Steel Tank. Interior Dimensions: 80" x 74" straight side. Center discharge: 4" tri-clamp. Side ports: 2" and 1/5". Top manway lid. Distance from discharge to floor is 42". (4) adjustable stainless steel legs with pads. Serial# H-486-95. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Waukesha

Used Gemco 1,400-Gallon Jacketed V-Blender – 187 Cu. Ft. Stainless Mixing Chamber with 100 PSI Thermal Jacket

Used- Gemco Jacketed V-Blender. 1,400-gallon (approximately 187 cubic foot total) V-blender total capacity, with estimated working capacity of approximately 94112 cubic feet depending on product characteristics and recommended fill level. Stainless steel mixing chamber. Jacket rated 100 psi at -20 to 250 degrees F. Mixer includes a cold trap. Mounted on a structural steel support frame. Serial # 98120. Possible applications include large-batch blending and thermal processing of powders, granules, dry ingredients, chemical products, pharmaceutical materials, nutraceutical blends, and other free-flowing particulate products.

MFR: Gemco

Used 1,900 gallon stainless steel tank manufactured by JV Northwest Inc. Tank has UM stamp, Serial # 13847, Built 1997. Jacket in two sections is rated for 45 PSI @ 400 degree F. Tank is 78" diameter...

Used-1,900 gallon stainless steel tank manufactured by JV Northwest Inc. Tank has UM stamp, Serial # 13847, Built 1997. Jacket in two sections is rated for 45 PSI @ 400 degree F. Tank is 78" diameter x 84" straight side. Bottom and 1/3 of the straight side jacketed. Tank has bottom mounted 3 hp agitator, 230/460 vac 3 ph power required. Top has 20" round manway with hinged lid, 10" vent pipe, one 6" tri clamp, two 3" tri clamp, and one 2" tri clamp. Jackets have two threaded connections each. Bottom has 4" 90 degree tri clamp elbow for the discharge. Side has .75" coupling with probe. Unit has four carbon steel legs.

MFR: JV Northwest

IN STOCK and New- Paul O. Abbe Model RB-195 Ribbon Blender.

NEW & IN STOCK- Paul O. Abbe Model RB-195 Ribbon Blender. In -Stock .195 Cubic Foot working capacity. 220 Cubic Foot total volume. Type 304 stainless steel polished. Food grade. All stainless steel construction. Trough dimensions: Approximately 56.7" wide x 118.2" long x 62.6" deep. Internal double spiral ribbon. Packing glands and pillow block bearings. 60 hp SEW Euro drive hollow bore design. 230/460 volt, 1775 rpm, 3/60 with approximately output 29 rpm. Top cover with hold down clamps and limit switch. Center Loading cover with welded safety grate, 30" wide x 50" long. Approximate 4.7" wide x 19.7" flush air operated plug valve. Discharge housing is approximate 20.5" wide x 28.4" long. Approximately 4" discharge height. Approximate weight 11,660 pounds. Approximate overall dimensions: 76.4" wide x 183" long x 93.8" high. Controls are available upon request.

MFR: Paul O Abbe

Used Alpine Ultraplex Cross Flow Mill B1000UP – 195 HP, Carbon Steel, Industrial Grinder

Used- Alpine "Ultraplex" Cross Flow Mill, Type B1000UP. Material of construction is Carbon Steel. Cast iron housing with swing back door. Top feed but without feed hopper. Baffle ribbed grinding tracks. Belt driven by a 195 hp (130 kw)-380volt/50cycle/3ph motor. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Alpine

Used MitterNight Boiler Works 1970 gallon 304ss mix tank. Tank has 2" internal coil that circles tank 4 times about 1/3 the way up the tank. The coil is rated at 100 psi @ 200 f. The internal tank...

Used-MitterNight Boiler Works 1970 gallon 304ss mix tank. Tank has 2" internal coil that circles tank 4 times about 1/3 the way up the tank. The coil is rated at 100 psi @ 200 f. The internal tank is rated at 25 psi at 200 f (tank is missing manway cover). The tank has a 2" stainless steel agitator with two props but has no drive. The 12" dome top has (3) 1", (1) 2", (3) 3" and (1) 4" flanged fittings with 18" manway. The 12" dish bottom has a center 12" flanged discharge. Tank measures 72" diameter x 96" straight side with 12" dish bottom and top. The overall dimensions are 88" diameter x 158" tall.

MFR: Mitternight Boiler Works

Unused 2022 Lleal AME-1250-SF Industrial Mixer/Extruder – 1,400 Liter Stainless Steel, 80 HP Mixing, 40 HP Extrusion, ATEX Rated

Unused 2022 Lleal AME-1250-SF Industrial Mixer/Extruder 1,400 Liter Stainless Steel, 80 HP Mixing, 40 HP Extrusion, ATEX Rated. Designed for heavy-duty industrial mixing and extrusion applications. Unit features a stainless steel mixing vessel with a 1,400-liter total capacity and 750-liter / 198 Gallon working capacity. Equipped with two mixing blade drive motors providing a combined 60 kW / 80 HP and a 30 kW / 40 HP extruder screw drive. Unit is configured for ATEX / Ex explosion-proof operation (Group II). Electrical requirements are 400 V, 3-phase + N + PE, 50 Hz, 173 amps, with total installed power of 90.25 kW. Overall dimensions approximately 4,143 mm L x 2,635 mm W x 1,950 mm H (163" x 104" x 77"). Manufactured in 2022, Serial No. 18725/1, Item No. 5904. Unit is unused and in like-new condition.

MFR: Leal

Used Patterson-Kelley 2 Cu. Ft. Stainless Steel Twin Shell V-Blender – 60 Lb./Cu. Ft. Density Rating

Used- Patterson-Kelley approximately 2 cubic foot stainless steel Twin Shell V-Blender. Rated for a maximum material density of 60 lbs. per cubic foot. Unit has provision for an intensifier bar; intensifier bar is not included. Model: Twin Shell Dry Blender.

MFR: Patterson Kelley

Used Patterson-Kelley 2 Cu. Ft. 316 Stainless Steel V-Blender – 270 Lb./Cu. Ft. Rating with Intensifier Bar

Used- Patterson-Kelley approximately 2 cubic foot Twin Shell V-Blender constructed of 316 stainless steel. Rated for a maximum material density of 270 lbs. per cubic foot. Equipped with an intensifier bar for enhanced mixing and dispersion. Unit is mounted on a stainless steel frame with casters for portability.

MFR: Patterson Kelley

Used Patterson-Kelley 2 Cu. Ft. Sanitary Stainless Steel V-Blender – Pharmaceutical Finish, 25 RPM with Dispersion Bar Provision

Used- Patterson Kelly 2 Cu.Ft. Twin Shell V Blender. Sanitary, Stainless Steel with Pharmaceutical grade finish. Rated 60 Lbs./Cu.Ft. material density. Unit has provisions for Liquid/Solids dispersion Bar. (No Bar installed) Shell has chain driven 3/4 HP, 208-220/440 volt with gear reducer for 25 RPM output. Bar drive is 2 HP with belts and guard. 6" Discharge with butterfly valve. 37" floor clearance. 14" charging ports with removable vented covers. Last use was pharmaceutical.

MFR: Patterson Kelley

High-Efficiency APV Crepaco W20/20 Pump – 105 GPM, 3500 RPM

High-Efficiency APV Crepaco W20/20 Pump 105 GPM, 3500 RPM. Approximate 105 gallons per minute, 95 head feet @ 3500 rpm. Approximate 2" inlet, 2" outlet. Driven by a 5hp, 3/60/230/460 volt, 3500 rpm motor. Serial# H-9296-95.

MFR: APV/Crepaco