Chemical Equipment

Unused Andritz Rotary Triple Pass Industrial Dryer – 10' x 30'

Unused- Andritz Rotary Triple Pass Industrial Dryer. First pass is 304 Stainless Steel, Second and third pass are carbon steel. 10' diameter x 30' long. Never installed. With running gear and trunnions. Requires the following: Heat source, Belt drive, Gearbox, and motor. These are not included. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Andritz

Unused Andritz Industrial Rotary Triple Pass Dryer – 10' x 30' Horizontal System

Unused- Andritz Industrial Rotary Triple Pass Dryer, Horizontal. First pass is 304 Stainless Steel, Second and third pass are carbon steel. Approximate 10' diameter x 30' long. Never installed. With running gear and trunnions. Requires the following: Heat source, Belt drive, Gearbox, and motor. These are not included. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Andritz

Used 2010 GEA 120 Sq. Ft. Shell & Tube Heat Exchanger – 316L Stainless Tubes, 350/450 PSI Rated

Used 2010 GEA 120 Sq. Ft. Shell & Tube Heat Exchanger 316L Stainless Tubes, 350/450 PSI Rated. 8'' diameter x 144'' face to face length. (60) 316L Stainless steel tubes rated 350 psi at -20 to 500 degrees F. Carbon steel shell rated 450 psi at -20 to 500 degrees F. Has carbon steel epoxy coated heads. Equipped with 2'' service nozzles and (2) 3/4'' drain/vent on service side. Process side has 1.5'' process nozzle, (2) 2'' vent/drain, and (2) 3/4'' instrument inlets. Mounted on legs. Serial # 100360, NB # 17040, built 2010.

Used 2010 GEA FES 120 Sq. Ft. Shell & Tube Heat Exchanger – 316L Stainless Tubes, 450 PSI Shell

Used 2010 GEA FES 120 Sq. Ft. Shell & Tube Heat Exchanger 316L Stainless Tubes, 450 PSI Shell. Measures 8" diameter x 144" face-to-face length. Equipped with (60) 316L stainless steel tubes rated for 350 psi at -20F to 500F. Carbon steel shell rated for 450 psi at -20F to 500F with epoxy-coated carbon steel heads. Service side includes 2" nozzles and (2) 3/4" vent/drain connections. Process side includes a 1.5" process nozzle, (2) 2" vent/drain connections, and (2) 3/4" instrument inlets. Mounted on legs. Serial #100363, National Board #17043. Built 2010.

Used 2010 GEA FES 120 Sq. Ft. Shell & Tube Heat Exchanger – 316L Tubes, 450 PSI Carbon Steel Shell

Used 2010 GEA FES 120 Sq. Ft. Shell & Tube Heat Exchanger 316L Tubes, 450 PSI Carbon Steel Shell, with an 8" diameter shell and 144" face-to-face length. Unit contains (60) 316L stainless steel tubes rated 350 psi from -20F to 500F. Carbon steel shell is rated 450 psi from -20F to 500F and features epoxy-coated carbon steel heads. Service connections include 2" nozzles with (2) 3/4" vent/drain ports. Process side is configured with a 1.5" process nozzle, (2) 2" vent/drain ports, and (2) 3/4" instrument connections. Supported on legs. Serial #100366, NB #17046. Manufactured in 2010.

Used 2010 GEA 120 Sq. Ft. Shell & Tube Heat Exchanger – 316L Stainless Tubes, 350/450 PSI Rated

Used 2010 GEA 120 Sq. Ft. Shell & Tube Heat Exchanger 316L Stainless Tubes, 350/450 PSI Rated. Measures 8" diameter x 144" face-to-face overall length. Features (60) 316L stainless steel tubes rated at 350 psi with a temperature range of -20F to 500F. Carbon steel shell rated at 450 psi over the same -20F to 500F temperature range. Includes epoxy-coated carbon steel heads, 2" service nozzles, and (2) 3/4" service-side vent/drain connections. Process side includes a 1.5" nozzle, (2) 2" vent/drain connections, and (2) 3/4" instrument inlets. Leg mounted. Serial #100368, National Board #17048. Built 2010.

Used Dr. Pharm FBD-120 120 Kg Fluid Bed Dryer

Used Dr. Pharm FBD-120 120 Kg Fluid Bed Dryer. Serial # 0106, Built December 2017. Rated for 120 kg per batch with 450-liter hopper, 0.21.25 mm dry grain size range, room temperature to 120 C temperature control, 4,500 cubic meters per hour airflow and 18.5 kW fan. Features AISI 304 stainless steel drying components, PLC with touchscreen controls, variable-frequency fan, process parameter storage, temperature monitoring, dual filter chambers with bag-shaking system, negative-pressure feeding, pneumatic hopper lifting/sealing, sampling, safety interlocks and wash-in-place functionality. Rated 220V, 60 Hz, 90 kW total power, with 0.40.6 MPa steam and compressed-air requirements. Approximate dryer dimensions: 47.2" diameter x 106.7" high with 77.2" frame width. Manufacturer manual included. Suitable applications include drying wet powders and granules for pharmaceutical solid-dose products, food products, fine chemicals and feed products.

Alco Heat Exchanger, Size 35.96, 1-32-52 H, Approximate 1,200 Square Foot. Used-

Used- Alco Heat Exchanger, Size 35.96, 1-32-52 H, Approximate 1,200 Square Foot. Approximate (778) 3/4" diameter x 8' long 316 Stainless steel tubes rated 75 psi @ 400 degrees F. Openings tube(head): (2) 12", shell: (2) 20".

MFR: ALCO

Used Feldmeier 1,200 Gallon Stainless Steel Tank – Vertical Cone Bottom Vessel w

Used- Feldmeier Stainless Steel Tank, Approximate 1,200 Gallon Capacity, Vertical. Approximately 58" diameter x 96" straight side. Dished top, coned bottom. Openings top: 18" manway with cover, 4", 3", (3) 2", Side: (2) 2". Bottom: 3", 1", 4" Center bottom outlet with approximately 25" discharge height. Mounted on (4) stainless steel legs. Serial# E-572-04.

MFR: Feldmeier

Used Alloy Fab 12,000-Gallon 304 Stainless Steel Mix Tank – 7.5 HP Agitator & Internal Heating Coils

Used Alloy Fab 12,000-Gallon 304 Stainless Steel Mix Tank 7.5 HP Agitator & Internal Heating Coils. Approximately 12' diameter x 15'8'' height, 216'' overall height. 304 Stainless steel. Flat top and bottom. Includes 7.5 HP top entering agitator. Tank has (2) loops of 2'' internal heating coils. Top ports include (1) 8'' 150lb flange, (3) 1.5'' threaded, (2) 3'' threaded, (1) 3'' vent pipe. Side ports include 19'' manway, (1) 2'' threaded, (2) 3'' threaded, (1) 1'' threaded, (2) 1/2'' threaded, and (2) 150lb flange inlet/outlets.

MFR: Alloy Fab

Used DCI 12,000 Gallon 304 Stainless Steel Storage Tank | Jacketed | Cone Bottom | Skirt Mounted | Built 1997

Used DCI 12,000 Gallon 304 Stainless Steel Storage Tank | Jacketed | Cone Bottom | Skirt Mounted | Built 1997. Approx. 132" inner diameter x 185" straight side, dish top, 41" deep cone bottom, (3) 28" high side jackets, (1) bottom jacket rated 150 psi at 100 f, 16" x 20" side manway, skirt mounted, approximately 333" OAH, SN 97D-56284. Built 1997.

MFR: DCI

Used A&B Process 12,000 Gallon Jacketed Vertical Mix Tank – 304L Stainless Steel (2019)

Used- A&B Process 12,000 Gallon Jacketed Vertical Mix Tank. Vessel rated 45 psi/FV @200 deg f. Jacket rated 100 PSI @ 200 deg F. Bottom scrape with turbine agitator. 304L stainless steel. Has spray balls. 2" fittings. 3 HP mixer. Built 2019.

MFR: A & B