Cannabis Industry Equipment
Stock No.:
48291061Shell & Tube Heat Exchanger, Unused- U Tube
Unused- 4 Pass U Tube Shell & Tube Heat Exchanger, Approximate 3409 Square Feet, Tema Type AEU, Carbon Steel, Horizontal. Shell rated 369psi/Full Vacuum at 392 degrees F., (368) 3/4" diameter x 288" long tubes rated 364psi/Full Vacuum at 320 degrees F. Openings shell (2) 4", (2) 8", openings for tubes (2) 2", (2) 6". Mfg: Ilsung Corporation. Serial# 14-HE-078, National Board# 2062, built 2015. OAD 358"L X 44"W X 82"T, 26609 lbs. Documents available. Nitrogen purged by manufacturer after testing and prior to storage.
MFR: Ilsung Corporation
Stock No.:
54687080Used Ametek Inc. Niagara Filters 316 stainless steel vertical pressure leaf filter. Model 48-322-342. Unit has 16 vertical removable pressure leaf filters. The pressure leaf filter has 342 square fee...
Used-Ametek Inc. Niagara Filters 316 stainless steel vertical pressure leaf filter. Model 48-322-342. Unit has 16 vertical removable pressure leaf filters. The pressure leaf filter has 342 square feet of surface area, 48" diameter vessel, is rated at 75 psi @ 200 F, and National Board # 3318. Serial number FA5177-2.
MFR: Ametek
Stock No.:
53393012Used – Horizontal, Carbon Steel, Aurora Industrial Machining Shell & Tube Heat Exchanger – 150 PSI
Used Horizontal Aurora Industrial Machining Shell & Tube Heat Exchanger, Approximately 343 square feet. Carbon steel (SA53B) Shell rated 150psi at -20 to 350 Degrees F. (262) 304 Stainless steel .625" diameter straight tubes rated 150psi at -20 to 350 Degrees F. Openings shell: 4" (inlet), 4" (outlet), 2" (relief), tubes: 10" (inlet), (3) 3/4" (vent/drain). National Board# 3056, Serial# 4142, built 1997.
MFR: Aurora
Stock No.:
54687194Used Dry Coolers Inc. model Aqua-Vent CDX-300-120SS-PHE-FPE-NF-MP closed-loop pumping station. The station includes a plate heat exchanger, (2) centrifugal pumps, and a 120 gallon tank. The heat exch...
Used-Dry Coolers Inc. model Aqua-Vent CDX-300-120SS-PHE-FPE-NF-MP closed-loop pumping station. The station includes a plate heat exchanger, (2) centrifugal pumps, and a 120 gallon tank. The heat exchanger is a WCR Inc. 343.4 sq ft stainless steel plate heat exchange. Model WCR-UX216. Serial # 1151. Maximum working pressure is 150 psi @ 300° F. The two EBARA model A3U40200A150T3C stainless steel centrifugal pumps are driven by 15 hp 3450 rpm motors. The 120 gallon stainless steel tank has a 24" diameter, a 62" straight side, and a 3" dome top. The system sits on a carbon steel platform. The overall dimensions are: 34" wide x 118" long x 80" tall. Requires 230/460 vac 3 phase electrical supply. Built in 2005.
Stock No.:
10715046IN STOCK& NEW- Paul O. Abbe, Model RB-35 Ribbon Blender.
NEW & IN STOCK- Paul O. Abbe, Model RB-35 Ribbon Blender. In -Stock .35 Cubic Foot working capacity. 39 Cubic Foot total volume. Type 304 stainless steel polished. Food grade. All stainless steel construction. Trough dimensions: Approximately 33.4" wide x 59.1" long x 37.4" deep. Internal double spiral ribbon. Packing glands and pillow block bearings. 25 hp SEW Euro drive hollow bore design. 230/460 volt, 1775 rpm, 3/60 with approximately output 42 rpm. Top cover with hold down clamps and limit switch. Center Loading cover with welded safety grate, 19.7" wide x 31.5" long. Approximate 4.7" wide x 14.2" flush air operated plug valve. Discharge housing is approximate 18.5" wide x 24" long. Approximately 24" discharge height. Approximate weight 2,860 pounds. Approximate overall dimensions: 52.7" wide x 107.5" long x 84.3" high. Controls are available upon request.
MFR: Paul O Abbe
Stock No.:
49143001Used American Process Systems Forberg Fluidized Zone Mixer – 35 Cu. Ft. Stainless Steel
Used- American Process Systems Forberg Fluidized Zone Mixer, Model FZM-35, 35 Cubic Feet Working Capacity, 304 Stainless Steel. Non-jacketed chamber approximate 58" long x 67" wide. (2) 4" Diameter shafts with (16) paddles per shaft, paddles 11-9/16" wide x 3/8" thick welded to 1-1/2" diameter posts. Driven by 30 hp, 3/60/208-230/460 volt, 1760 rpm motor with 30.05:1 gearbox ratio. (2) 20" x 20" side access doors, (2) 9" x 57" Bombay door style outlets. Includes stainless steel stand, Bag Dump Station. Serial# F1041. Last used for Cereal / Food Product. Great alternative for Ribbon and Paddle Mixer.
MFR: American Process Systems
Stock No.:
51825001Onan 35 kW Natural Gas Generator Set: Reliable Standby Power Solution
Used- Cummins / Onan 35 kW Standby Natural Gas Generator Set, Model 35SJB, SN-L900363017. Chrysler model H135 engine, SN-K1142033, 3600rpm. Rated 35 kW, 3/60/277/480V 12 lead reconnectable to other voltages.. 60 Amp main-line circuit breaker. Hours 403. No enclosure.
MFR: Cummins/Onan
Stock No.:
54645006Used Hobart V1401 140-Quart Planetary All-Purpose Batch Mixer with Stainless Steel Bowl
Used Hobart Planetary All Purpose Batch Mixer, Model V1401. Has a capacity rating of 140 quarts. (4) Fixed speeds with timer. Has stainless steel bowl. Includes attachments. Gear driven. Driven by 5 hp motor, 1750 rpm. Serial# 1594888. 3/60/208 Volt.
MFR: Hobart
Stock No.:
54671001Used Paul O. Abbe Model RB-35 35 Cubic Foot 304 Stainless Steel Food Grade Ribbon Blender
Used Paul O. Abbe Model RB-35 ribbon blender with 35 cubic foot working capacity and 39 cubic foot total volume. All stainless steel construction with polished Type 304 stainless steel product contact surfaces and food grade design. Trough measures approximately 33.4"W x 59.1"L x 37.4"D and is equipped with an internal double spiral ribbon, packing glands and pillow block bearings. Driven by a 20hp 3/60/230/460v 1777/42rpm motor through a reducer 41.87:1 ratio. Features a top cover with hold-down clamps and limit switch, center loading cover with welded safety grate measuring approximately 19.7"W x 31.5"L, and an approximately 4.7"W x 14.2" flush air-operated plug valve. Discharge housing measures approximately 18.5"W x 24"L with approximately 24" discharge height. Overall dimensions are approximately 56"W x 108"L x 90" Tall with an approximate weight of 2,860 lbs. Last used on corn meal. Possible applications include batch blending of suitable dry food powders, granular products and similar free-flowing materials such as corn meal.
MFR: Paul O Abbe
Stock No.:
53462006Karl Schnell Dual Ribbon Blender, type 740 Schraubenwellen
Used- Karl Schnell Dual Ribbon Blender, type 740 Schraubenwellen. Stainless steel construction. Total capacity approx. 35.3 Cu. Ft (1000 liter), working capacity 26.48 cu. Ft (750 liter) dependent on product density. (2) Double ribbons; (2) End outlets. (1) Hydraulic operated top cover. (2) 4,4 / 5,5 kW 400 Volt - 50 cycle - n1: 1420 / n2: 39 / n1: 2860 / n2: 78 rpm 1090 / 675 Nm. motors. Incl. control panel (mounted on mixer). Previously used in a cheese application. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.
MFR: Karl Schnell
Stock No.:
54020001Used Lleal AME-2600-SSF Double Sigma Blade Mixer Kneader with Extruder – 1,300 Liter
Used Lleal Process Model AME-2600-SSF Carbon Steel Double Sigma Blade Mixer Kneader And Extruder With 2,600 Liter Total Capacity, 1,300 Liter Working Capacity And 270 HP Hydraulic Power System. Heavy-duty industrial batch mixer, kneader and extrusion system designed for intensive mixing, kneading, homogenizing and processing of compatible high-viscosity materials, pastes and compounds. Features a carbon steel mixing trough with approximately 2,600 liters (680 gallons) total capacity and 1,300 liters (350 gallons) working capacity, equipped with (3) carbon steel heating coils designed for thermal oil operation at temperatures up to 356 F (180 C) and maximum operating pressure of 60 psi (4 bar). Mixing chamber includes (2) carbon steel double sigma kneading blades with internal heating circuits designed for water recirculation at 356 F (180 C) and maximum pressure of 4 bar. Blades feature machined and polished surfaces, double-bearing shaft supports at both ends and variable operating speeds ranging from 0 to 25 RPM. Equipped with a carbon steel extrusion screw incorporating an internal water recirculation heating circuit, with constant screw pitch through the mixing trough and decreasing pitch through the extrusion chamber. Extrusion screw operates at variable speeds from 0 to 25 RPM. Includes a carbon steel extrusion chamber with heating jacket rated for temperatures up to 356 F (180 C) and maximum pressure of 60 psi (4 bar). Heated components, including the mixing trough, end plates and extrusion chamber, feature approximately 3" thick rock wool thermal insulation covered with stainless steel cladding. Equipped with (6) stuffing boxes containing braided Teflon packing and hard chrome-coated protective caps at the blade shaft sealing surfaces. Features an insulated carbon steel dust-tight cover with hydraulic lifting mechanism, (4) hydraulic safety seals and operation from the control panel. Mixing blades are driven by (2) hydraulic motors with planetary gear reducers, powered by a 270 HP hydraulic power pack incorporating (2) independent hydraulic pumps and separate hydraulic circuits. Extrusion screw is driven by an additional hydraulic motor with planetary gear reducer, powered by the same 270 HP hydraulic system through an independent hydraulic pump and circuit. Hydraulic power pack is equipped with an air refrigeration cooling system for temperature control. Manufactured by Lleal S.A., Badalona, Spain. Manufacturer reference OF:14162-M/97. Possible applications include high-viscosity mixing, sigma blade kneading, heated batch processing, paste homogenization and extrusion of compatible adhesives, sealants, mastics, polymer compounds, rubber-based formulations, pigment pastes, specialty chemical compounds and other suitable viscous industrial materials. Serial# 14162. Skid Order# 14/250391.
