Cannabis Industry Equipment

Used Groen TDH-40 Table Top Kettle – 40 Quart, Gas-Heated, Steam Jacketed

Used- Groen Table Top Kettle, Model TDH-40, 40 Quart Capacity, Stainless Steel. Approximate 16-1/2" diameter x 14" deep. Self-contained steam jacketed unit with natural gas heated steam source contained within unit. Input rated 52,000 btu / hr. 2/3 bottom jacket rate 50 psi at 300 degrees F. Manual tilting with pour lip. Mounted on a base. National Board# 12100, Serial# 1988-10.

MFR: Groen

Commercial Tabletop Kettle for Sale – Groen TDH-40, Natural Gas Heated

Used- Groen Model TDH-40 Table Top Kettle, 40 Quart Capacity, Stainless Steel. Approximate 16-1/2" diameter x 14" deep. Self-contained steam jacketed unit with natural gas heated steam source contained within unit. Input rated 52,000 btu / hr. 2/3 bottom jacket rate 50 psi at 300 degrees F. Manual tilting with pour lip. Mounted on a base. National Board# 13816, Serial# 1989-4. 1/60/110 Volt.

MFR: Groen

Commercial Stainless Steel Groen TDH-40 Kettle – 40 Qt, Self-Contained Steam

Used- Groen Stainless Steel Table Top Kettle, Model TDH/40-SP, 40 Quart Capacity. Approximate 16-1/2" diameter x 14" deep. Self-contained steam jacketed unit with natural gas heated steam source contained within unit. Input rated 52,000 btu / hr. 2/3 bottom jacket rate 50 psi at 300 degrees F. Manual tilting with pour lip. Mounted on a base. National Board# 32385, Serial# 32385. 1/60/110 Volt.

MFR: Groen

Used Patterson-Kelley 10 Cu. Ft. 304 Stainless Steel Twin Shell V-Blender – 135 Lb./Cu. Ft. Density Rating

Used- Twin Shell (V-Blender) - Patterson Kelly 10 Cubic Foot 304 Stainless Steel. Rated maximum material density 135 lbs./cu. Ft. Has (2) 18" top charge ports and a 8" bottom discharge with a butterfly valve. Interior has milled finish. Unit is direct driven by approximately 2HP right angle geardrive with an electric brake. Has Dodge pillow block bearings. Mounted on carbon steel stand giving 48" from bottom valve to floor. Overall dimensions 91" long X 30.5" wide X 101" tall.

MFR: Patterson Kelley

Used Continental Rollo-Mixer Mark V 74-133 – 133 Cu Ft Blender

Used- Continental Rollo-Mixer Mark V, Model 74-133. Carbon steel construction. Mixer is designed for maximum loading capacity of 133 cubic feet with a maximum load weight of 10,200 lbs. Rated for an average finished batch density of 60 lbs per cubic foot, providing a batch capacity of approximately 7,980 lbs. Mixer driven by a 10 HP motor, and is equipped with liquid injector. Serial # 2524. Suitable applications include industrial dry powder blending, granular material mixing, agricultural chemicals, fertilizers, mineral blends, and dry bulk products requiring liquid additive incorporation.

MFR: Continental

Unused LACT Hydraulic Pump Unit | 200 GPM @ 45 PSI | Viking Q4127A Pump | 10 HP Motor | 3” Stainless Piping | Static Mixer, Valves & Meter | Skid-Mounted | Built 2021

Unused- LACT Hydraulic Pump Unit. 200 GPM flowrate at 45 PSI discharge pressure. 3" stainless steel piping. Includes Viking Q4127A Pump, driven by a 10hp 3/60/460v 1800rpm motor. static mixer, valves, and meter. Skid mounted. Built 2021.

Used Premier Mill ESD/V-10/5 Stainless Steel Media Mill – 10-Liter Grinding Chamber, 10 HP Drive

Used- Premier Mill Corp. Media Mill. Model ESD/V-10/5, Stainless steel. Manufactured in May 2000. 208 V power with a 10 HP drive motor and a 5 HP pump motor. In Premier's ESD nomenclature, the "10" designates the grinding chamber volume of 10 liters (2.64 U.S. gallons) rather than a batch size, since the machine is a continuous-flow mill and has no fixed batch capacity. Throughput and batch size depend on the product viscosity and the particle fineness required, with the mill paired to a feed or recirculation tank 10100 gallons for lab and pilot work, and 50300 gallons for production recirculation. Floor mounted construction and configured for high-shear mixing and dispersion with recirculation through the product loop, suitable for paints, inks, coatings, adhesives, chemicals, and specialty product formulations in laboratory, pilot, and production service

MFR: Premier

Used APV Crepco liquid product temperature control system. Total 10 sq ft from all 3 stages. This is a custom made system that uses chilled and hot water to control and record product temperature. Eq...

Used-APV Crepco liquid product temperature control system. Total 10 sq ft from all 3 stages. This is a custom made system that uses chilled and hot water to control and record product temperature. Equipped with APV model Junior 3 sectioned plate and frame heat exchanger. The heat exchanger uses 34° F chilled water from an Edwards Engineering Model LSCC3A chiller. Chiller Serial # 853790. Chiller is rated at 36,000 BTU/HR. 281° F steam for hot water is supplies by outside source. Good condition.

MFR: APV

Used Zanchetta (IMA) T Tote Bin

Used- Zanchetta (IMA) T Tote Bin, approximately 10.5 cubic feet (300 liter) (79.2 Gallons), Stainless Steel. 40" diameter x 4" straight side x 24" cone bottom. 15 top opening, 6" discharge. Mounted on a stainless steel frame.

MFR: IMA

Used 10.5 cubic foot Zanchetta T Tote Bin

Used- Approximately 10.5 cubic foot Zanchetta T Tote Bin (300 liter) (79.2 Gallons), Stainless Steel. 40" diameter x 4" straight side x 24" cone bottom. 15 top opening, 6" discharge. Mounted on a stainless steel frame.

MFR: IMA

Used 300 Liter Industrial T Tote Bin, Made by Zanchetta

Used- 300 Liter Industrial T Tote Bin, Made by Zanchetta, approximately 10.5 cubic feet (79.2 Gallons), Stainless Steel. 40" diameter x 4" straight side x 24" cone bottom. 15 top opening, 6" discharge. Mounted on a stainless steel frame.

MFR: IMA

Alfa Laval Fermenter / Reactor, Approximate 40 Liter (10.5 Gallon), 316L-Unused-

Unused- Alfa Laval Fermenter / Reactor, Approximate 40 Liter (10.5 Gallon), 316L Stainless Steel, Vertical. Approximate 12" diameter x 22" straight side, bolt-on flat top, dished bottom. Internal rated 45 PSI/FV at -20 to 400 degree F. 316L Stainless steel Jacket rated 150 psi/FV at -20 to 400 degree F. Bottom entering agitation 1/2hp drive, missing agitator. (1) Spray ball. Side lug mounted with load cells. National Board #264. Serial #786-100/17. Built 2004. Includes control panel with Wedgewood technology model 653 absorbance monitor, Mettler toledo Jag xtreme digital read out, (4) metering valves. All mounted on stainless steel frame.

MFR: Alfa Laval