Cannabis Industry Equipment

Used Paul Mueller 200 gallon 304 stainless steel Reactor. Serial # P11720-15. National Board # 9906 Interior is rated for 50 psi @ 450 f. The shell is rated a 150 psi @ 450 f with a glycol medium. S...

Used-Paul Mueller 200 gallon 304 stainless steel Reactor. Serial # P11720-15. National Board # 9906 Interior is rated for 50 psi @ 450 f. The shell is rated a 150 psi @ 450 f with a glycol medium. Shell is also rated for full Vacuum. The tank is 36" in diameter with 32" straight side height and 8" dish bottom and dome top. Agitator is a 3 blade prop type with a 200 rpm Philadelphia 1 hp motor drive. The top has a 18" manway cover with pnuematic assist and glass view port. Top also has (3) 2" sanitary fittings, (3) 3" sanitary fittings and a 4" flange fitting with a glass view port. The bottom has a 2" sanitary center discharge. The side has 3" flange fittings (currently covered with blind flange). Requires 230 vac 3 ph electrical supply. Built in 1984. Good Condition.

MFR: Paul Mueller

Used National Turbine 7 stage centrifugal blower. According to the curve it can blow 3,000 cfm @10 psi, 4,000 cfm @ 8.5 psi. Model # NT88307-5-00-2-AD. Serial # 2111020. Driven by 200 hp electric m...

Used-National Turbine 7 stage centrifugal blower. According to the curve it can blow 3,000 cfm @10 psi, 4,000 cfm @ 8.5 psi. Model # NT88307-5-00-2-AD. Serial # 2111020. Driven by 200 hp electric motor. Blower has 8" air intake and 8" export ports. Requires 460 vac 3ph electrical supply. Overall dimensions 40" wide x 83" tall x 100" tall. Curve on file.

Used U.S. Filter Company Auto jet self cleaning (rotating leaves) vertical pressure leaf filter. This unit is insulated for chill filtering. It has 16 each 34" rotating leaves vertical mounted filtra...

Used U.S. Filter Company Auto jet self cleaning (rotating leaves) vertical pressure leaf filter. This unit is insulated for chill filtering. It has 16 each 34" rotating leaves vertical mounted filtration screens on a horizontal rotating shaft. Quick openning head. 2.5" and 3.5" Inlet and 6'' diameter discharge. Driven by 1/2 hp a Duty Master Motor 1725 RPM. Requires 230/460 vac 3 ph. The Unit has 68" x 84" overall width and length and 87" overall height. Shell tested as 304 stainless.

MFR: US Filter

Used Micro Air RP8 Dust Collector – High Capacity Industrial Air Filtration System

Used Micro Air Model RP8 Dust Collector. Up to 2,000 square feet of filter area. (8) Cartridges. 10 HP Blower. 3,500 to 5,000 CFM (depending on set-up). 3/60/208/230/460V.

MFR: Micro Air

Buy Used Micro Air RP8 Dust Collector – 2,000 Sq Ft Filter Area System

Used Micro Air Dust Collector, Model RP8. Up to 2,000 square feet of filter area. (8) Cartridges. 10 HP Blower. 3,500 to 5,000 CFM (depending on set-up). 3/60/208/230/460V.

MFR: Micro Air

2000 Gallon Hastelloy C-276 mix tank

Used- 2000 Gallon Hastelloy C-276 mix tank. Dish top and bottom. Built By Addison Fab. 6' dia. x 9' T/T. Lightnin 3/4 HP mixer, 208-220/440 volt. Lug mounted. Rated 10" WC @ 250 Deg.F. Alloy

Used Feldmeier 2,000-Gallon 316L Stainless Steel Jacketed Sanitary Reactor – 30 PSI/FV, 125 PSI Jacket

Used Feldmeier 2,000-Gallon 316L Stainless Steel Jacketed Sanitary Reactor 30 PSI/FV, 125 PSI Jacket, Vertical. Internal rated 30 PSI / Full Vacuum @ 300 Degrees F. Jacket rated 125 PSI @ 300 Degrees F. Top mounted Cleveland Mixer, driven by a 1 HP, 3/60/208-230/460 volt, 1755 RPM motor. Wall thickness is 5/16". Top and Bottom heads are 7/16". Mounted on stainless steel legs.

MFR: Feldmeier

Unused 2,000 Gallon 316 Stainless Steel Process Tank with Side Scrape Mixer

Unused TSI 2,000 Gallon Vertical Stainless Steel Agitated Tank. 316 Stainless steel. Approximately 84" diameter x 72" straight side. Dished top and bottom. Stainless steel top agitator bridge with top entering counter rotating anchor style agitator with side scrapers and inner flat bars (1/2" x 4"), bottom supported, driven by a 5//3 hp, 3 phase/60//50hz, 230/460 - 190/380 volt 1750/1450 rpm motor, and a 7.5//5 hp, 3phase/60//50hz, 230/460 - 190/380 volt, 1770/1475 rpm motor through a reducer 8.48:1 ratio. 18" Top manway. 3" Center bottom outlet, approximate 56-1/4" discharge height. Mounted on (4) stainless steel legs. Drawing available. Manufactured by (TSI) Todd Street Inc Stainless Steel Fabricators. Overall dimensions approximately 84" x 96" x 192"tall. Ideal for food, cosmetic, pharmaceutical, chemical, and specialty product processing applications.

Used 2,000 gallon Santa Rosa Stainless Steel vertical tank with three zone 20 PSI MAWP jacket. Overall height is 240" tall on four legs. Main shell is 66" OD x 125" straight side. Long bottom cone ha...

Used-2,000 gallon Santa Rosa Stainless Steel vertical tank with three zone 20 PSI MAWP jacket. Overall height is 240" tall on four legs. Main shell is 66" OD x 125" straight side. Long bottom cone has two 1" threaded jacket fittings and one 2" tri clamp bottom fitting. Side has four 1" threaded fittings for the jacket, one 3" tri clamp, one 2" tri clamp, one 16" x 20" elliptical manway and two 1" threded couplings for probes. Top has 3- 2" tri clamp fittings. Cone length 53" long.

MFR: Santa Rosa

Used 2,000 gallon stainless steel vertical jacketed tank with cone bottom and dished top on four legs. Tank is 72" ID x 99.5" straight side. Side has 20" x 16" eliptical manway, one 3/4" tri clamp no...

Used-2,000 gallon stainless steel vertical jacketed tank with cone bottom and dished top on four legs. Tank is 72" ID x 99.5" straight side. Side has 20" x 16" eliptical manway, one 3/4" tri clamp nozzle, two 3/4" copper pipes to the jacket. Dished top has one 2" tri clamp nozzle and one 3/4" tri clamp nozzle to a spray ball. Cone has two 1-1/2" tri clamp nozzle. Cone is 35" length. Top has four lift lugs. Manufactured by Modern Brewing & Design Inc.

Used 2000 gallon stainless steel vertical mix tank equipped with a top-mounted Philadelphia Mixers agitator that has pitched blade turbines to allow for maximum axial flow. Tank vessel is rectangular...

Used-2000 gallon stainless steel vertical mix tank equipped with a top-mounted Philadelphia Mixers agitator that has pitched blade turbines to allow for maximum axial flow. Tank vessel is rectangular with a straight side length of 132" and a width of 60". Agitator driven by a 15 hp, 1760 rpm motor that requires 230/460 vac, 3 ph electricity. Discharge has a Worcester model 3-416-T-151 ball valve with 3" outlet. There are two 63" w x 21.5" l hinged lids for mainetenance/operation at the top. Tank has some dried paint residue inside.

MFR: Philadelphia

Used 2000 gallon stainless steel vertical mix tank equipped with a top-mounted Philadelphia Mixers agitator that has pitched blade turbines to allow for maximum axial flow. Tank vessel is rectangular...

Used-2000 gallon stainless steel vertical mix tank equipped with a top-mounted Philadelphia Mixers agitator that has pitched blade turbines to allow for maximum axial flow. Tank vessel is rectangular with a straight side length of 132" and a width of 60". Agitator driven by a 15 hp, 1760 rpm motor that requires 230/460 vac, 3 ph electricity. Discharge has a Worcester model 3-416-T-151 ball valve with 3" outlet. There are two 63" w x 21.5" l hinged lids for mainetenance/operation at the top. Tank has some dried paint residue inside.

MFR: Philadelphia