Cannabis Industry Equipment

Used PIERALISI FP600RS 2-Phase Solid-Liquid Decanter Centrifuge – 4000 RPM, 11 kW

Used PIERALISI FP600RS 2-Phase Solid-Liquid Decanter Centrifuge. Centrifugal Force: G 3157 at 4000 RPM Motor Power: 11 kW Overall Dimensions: Drum Diameter: 353 mm (13.9") Drum Length: 1228 mm (48.3") Length-to-Diameter Ratio: 3.29 Total Weight: Approximately 1350 kg Hydraulic Capacity: 9000 l/h (9 m/h) Actual Throughput: Dependent on the required separation level, but indicative values are: 50 tons/day of tallow 10001200 kg/h of olives 6000 l/h of sludge Optional: Complete supply of 1 new electrical panel with PLC, Siemens touchscreen. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Pieralisi

Used JV Northwest 1,300-Gallon Single-Wall Tank – 316 Stainless Steel

Used- JV Northwest Single-Wall Tank, 1,300-gallon. Constructed of 316 stainless steel. 78" diameter x 60" straight side; flat top, dish bottom design; Bottom head includes a 2" diameter center bottom outlet; Top ports include (1) 2" diameter tri-clamp fitting; Tank is mounted on (4) stainless steel legs and includes a bridge mount for agitation or other top-mounted equipment; Shell Thickness: 2.3mm/0.090 inches. Previously used in cosmetics applications.

MFR: JV Northwest

Used Approx. 13,000 Gallon Pittsburgh Tank Corporation Carbon Steel Vertical Mix Tank

Used- Approx. 13,000 Gallon Pittsburgh Tank Corporation Carbon Steel Vertical Mix Tank. Flat top and bottom. 11-6" diameter X 17 high straight side. Has side bottom manway. Has (4) internal baffles. Has stainless steel (4) blade agitator, driven through Chemineer Drive. Insulated and covered with sheathing. Includes ladder with safety cage and top handrail.

MFR: Pittsburgh-Des Moines

Used ER Manufacturing 13,200 Gallon Vertical Carbon Steel Storage Tank with Cone Bottom

Used ER Manufacturing 13,200 Gallon Vertical Carbon Steel Storage Tank with Cone Bottom. 13,200 gallon/50 cubic meter capacity. 9'3" diameter x 36' overall height. 24" x 36" side manway. 8" center bottom outlet port. 6" internal feed line. Cone bottom. With removable caged ladder. On (4) leg frame.

MFR: ER

J.H. Day 135 Cu Ft Ribbon Blender, Stainless Steel, (2) Bag Dump Stations, XP Motor

Used J.H. Day Stainless Steel Double Spiral Ribbon Blender, Approximate 135 Cuft. With top cover and (2) bag dump stations. 30 HP XP motor & reducer, center bottom outlet with valve. Serial# 85051.

IN STOCK AND NEW- Paul O. Abbe Model RB-135 Ribbon Blender.

NEW & IN STOCK- Paul O. Abbe Model RB-135 Ribbon Blender. In -Stock .135 Cubic Foot working capacity. 146 Cubic Foot total volume. Type 304 stainless steel polished. Food grade. All stainless steel construction. Trough dimensions: Approximately 49.6" wide x 105.5" long x 53.6" deep. Internal double spiral ribbon. Packing glands and pillow block bearings. 40 hp SEW Euro drive hollow bore design. 230/460 volt, 1775 rpm, 3/60 with approximately output 33 rpm. Top cover with hold down clamps and limit switch. Center Loading cover with welded safety grate, 30" wide x 50" long. Approximate 4.7" wide x 19.7" flush air operated plug valve. Discharge housing is approximate 20.5" wide x 28.4" long. Approximately 8" discharge height. Approximate weight 7,920 pounds. Approximate overall dimensions: 64.8" wide x 158.3" long x 84.7" high. Controls are available upon request.

MFR: Paul O Abbe

Used Alfa Laval M10-MFG Plate Heat Exchanger – 137.3 Sq. Ft., 100 PSI, Stainless Steel

Used- Alfa-Laval Plate Heat Exchanger, Model M10-MFG. 137.3 Square Feet. (58) 304 Stainless Steel plates, approximately 253mm (9.9") wide x 34" long x 0.40mm thick plates. Rated 100psi at -20 to 190 degrees F. Mounted in expandable frame with (3) legs. Serial# 30105-61105.

MFR: Alfa Laval

Used Alfa Laval Decanter Centrifuge, Model NX418

Used- Alfa Laval NX-418 Solid Bowl Decanter Centrifuge, Stainless Steel, 3 Phase 460 Volt AC, 50/60 Hertz, 10 HP/12 AMP and 40 HP/38 AMP Motors, 3,500 RPM and 1775 RPM. Previously used for urea-based solvents.

MFR: Alfa Laval

Reconditioned Sharples P-3000 Decanter Centrifuge – 14x30 Bowl, 25 HP, 3180 G-Force, Vibration Monitor

Reconditioned Sharples P-3000 Decanter Centrifuge 14x30 Bowl, 25 HP, 3180 G-Force, Vibration Monitor. 4.25" conveyor pitch; painted steel frame and case; custom vapor seals; special scroll conveyor; floaters; ratio gearbox,; Metrix 5500 vibration switch; 25 HP Main drive motor; 10 HP back-drive motor; BeiJer Electronics Control Panel; steel platform. Reported to be reconditioned.

MFR: Sharples

Used Sharples P-3400HHS Super-D-Canter Centrifuge

Used- Alfa Laval / Sharples P-3400HHS Super-D-Canter Centrifuge, 316 Stainless Steel construction (product contact areas), maximum bowl speed 5000 rpm. Single lead conveyor, 360 degrees solids discharge ports with replaceable wear inserts, (missing liquid dam plates), base, casing, gearbox 95:1 ratio, feed pipe, DC Main drive motor, 15 hp DC backdrive motor. Mounted on approximate 4' stand with panel.

MFR: Sharples

Used Sharples Super-D-Canter Centrifuge. Model P-1000

Used- Alfa Laval / Sharples Super-D-Canter Centrifuge, Model P-1000. Stainless steel construction (product contact areas), conical bowl design, hard surfaced conveyor, base, casing, 20 hp main drive motor, feed pipe, vibration isolators, belt guard.

MFR: Sharples

Used Alfa Laval / Sharples P-3000 Super-D-Canter Centrifuge – 4,000 RPM, 28.5 HP

Used- Alfa Laval / Sharples P-3000 Super-D-Canter Centrifuge. 316 Stainless Steel construction (product contact areas), maximum bowl speed 4000 rpm, 4" double lead conveyor with welded hardfacing, hogged-out cake discharge ports with cake flingers, liquid plate dams, base, casing, gearbox with torque arm assembly, feed pipe, vibration isolators. Bowl driven by 28.5hp (21.3 kW), 460/3/60 main drive motor.

MFR: Sharples