Waste Water Equipment
Stock No.:
53043003Industrial Groen TDH-40 Tabletop Steam Kettle – 40-Quart, Tilting, Natural Gas
Used- Groen 40 Quart Capacity Table Top Kettle, Model TDH-40, Stainless Steel. Approximate 16-1/2" diameter x 14" deep. Self-contained steam jacketed unit with natural gas heated steam source contained within unit. Input rated 52,000 btu / hr. 2/3 bottom jacket rate 50 psi at 300 degrees F. Manual tilting with pour lip. Mounted on a base. National Board# 29964, Serial# 29964. 1/60/110 Volt.
MFR: Groen
Stock No.:
49484001Used Drais Mannheim Plow Mixer/Dryer – Type TK 400-Turbu Kneter, 400L, 321 Stainless Steel
Used- Drais Mannheim Plow Mixer/Dryer, Type TK 400-Turbu Kneter. Material of construction is 321 (1.4541) stainless steel on product contact parts. Stainless steel mixing body. Total capacity is 14.12 cubic feet (400 liter), Maximum working capacity 10.6 cubic feet (300 liter). Minimum working capacity 4.23 cubic feet (120 liter). Stainless steel double jacketed for heating/cooling rated at 90 psi (6 bar). Heating/cooling surface approximately 17 square feet (1.7 m2). Inside rated for 0 psi at 122 degree F (50 degree C). FM I Becker plows driven via a Stimrad-Aufsteckgetribe gearbox, Type H 2HH 5A by an 82.5HP/55Kw-400 volt AC/50cycle/3PH Non EX motor, Type K 11 R 250 M 4 KT-200H. Mixing speed 175 RPM. Twin screw feeder, driven by 0.55 KW / 0.83 HP - 400 volt AC / 50 cucle / 3 Ph motor, 3.9" (100 mm) bottom outlet valve. Inspection door with counter weights. Overall dimensions: 12' long x 34" width x 54" high (3700 mm long x 1050 mm width x 1650 mm high). Weight 5192 pounds (2360 kgs) empty. Serial # 55918. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.
MFR: Draiswerke
Stock No.:
49256004Used Gemco Double Cone Blender – 100 Cu. Ft. Working Capacity, 304 SS, 7.5 HP Motor
Used- Gemco Double Cone Blender with approximately 100 cubic feet working capacity (140 cubic feet total capacity), constructed of 304 stainless steel and designed for efficient, large-batch blending of dry powders and granules. The unit is equipped with a 7.5 HP gear motor rated for 3/60/230/460 volt service at 1,770 RPM, pneumatic braking system, 18-inch diameter charging door with 8-inch access port, and a 12-inch center bottom discharge fitted with a manual butterfly valve. Featuring an 84-inch inside diameter belly band and the proven double cone blending design, this blender provides gentle, low-shear mixing and excellent blend uniformity for free-flowing materials while minimizing product degradation. Overall dimensions are approximately 156" long x 48" wide x 147" high, with an approximate weight of 12,000#. The large-capacity vessel is well suited for nutraceutical and dietary supplement manufacturers, food ingredient processors, spice and premix producers, bakery and beverage ingredient operations, chemical processors, and contract manufacturing facilities requiring efficient production-scale blending. The stainless steel construction offers durability, corrosion resistance, and ease of cleaning, making this unit an excellent choice for a wide range of food, nutraceutical, chemical, and industrial powder blending applications.
MFR: Gemco
Stock No.:
11059370Used Ross PVM-100 Triple Motion Vacuum Mixer | 100 Gallon | Stainless | High Shear | 3 Mixers | Jacketed
Used Ross Triple Motion Vacuum Mixer, Model PVM-100. Approximately 100 gallon stainless steel jacketed change can. Vacuum-rated system equipped with three independently driven mixing assemblies consisting of a 10 HP three-wing anchor agitator with side and bottom scrapers, 10 HP high speed disperser, and 25 HP high shear rotor stator emulsifier. Unit features a hydraulic lift for raising the mixing head, jacketed vessel for heating or cooling, and includes the control panel. Designed for mixing, dispersing, homogenizing, and emulsifying high viscosity products. Suitable for processing creams, ointments, emulsions, adhesives, sealants, gels, pastes, and other high viscosity products for pharmaceutical, cosmetic, food, and specialty chemical applications. Built 2000.
MFR: Ross Industries
Stock No.:
11585120Used JH Day Double Ribbon Blender – Approx. 100 Cubic Foot Stainless Steel
Used- JH Day approximately 100 cubic foot stainless steel double ribbon blender. 40" wide X 120" long X 48" deep. 8" center bottom discharge. Stainless steel covers. Driven by a 20hp 3/60 230/460volt 1760 rpm motor with Stober drive reducer 32.1:1 ratio.
MFR: J H Day
Stock No.:
54219003Groen 100 Gal Steam Jacketed Kettle – 125 PSI | Radicon Drive | TA100 SP
Used Groen Kettle, Model TA100 SP, 100 Gallon, Stainless Steel. Approximately 36" diameter x 30" deep. Open top, hemispherical bottom. Jacket rated 125 psi. Bridge Mounted Radicon Drive with Anchor Agitator. Provision for Teflon Wipers (Wipers not Included). Driven by a 2hp 3/60/230/460 volt, 1755 rpm gear motor 63:1 ratio. Openings top: (2) 4", 2", 1-1/2", 2-1/2" center bottom outlet with 10-1/2" discharge height. Serial# 88772. Mounted on 3 legs.
Stock No.:
54342002Used Littleford 100 Cu Ft Ribbon Blender – Sanitary Stainless Steel Mixer
Used Littleford Double Ribbon Blender, Model B100. Total vessel capacity 127 cubic feet, working capacity 100 cubic feet. 304 Stainless steel Sanitary Construction. Density 30-36 LB/Cubic foot. Approximately 120" long x 40" wide x 50" deep trough. hinged covers with safety grate. 4" diameter center bottom discharge with sliding disc valve. Driven by a 40hp, 3/60/460 volt, 1770rpm motor through reducer, 48.8 to 1 ratio. Mounted on carbon steel frame.
MFR: Littleford
Stock No.:
54383005Altam Process Knock Out Drum 100 Gallon Horizontal Vessel – 2023
Used Altam Process Knock Out Drum, Approximately 100 Gallon, Stainless Steel. Internal rated 15 psi @ 230 degrees F. Horizontal, dished heads. On stand. Serial# 631, Year 2023.
Stock No.:
54512002Unused Heritage BCast 1,000 Gallon Stainless Steel Storage Tank
Unused Heritage BCast Stainless Steel Products 1000 Gallon Single Wall Stainless Steel Storage Tank. Has 316 Stainless Steel Contact, 20 degree slope to center bottom outlet with 2" tri clamp fitting. 38" distance from floor to drain. Sidewall, top and bottom thickness is all 3.0 (12 GA). Has a #4 finish interior and a 2b finish outer walls.
