Power Generation Equipment

Industrial Groen TDH-40 Tabletop Steam Kettle – 40-Quart, Tilting, Natural Gas

Used- Groen 40 Quart Capacity Table Top Kettle, Model TDH-40, Stainless Steel. Approximate 16-1/2" diameter x 14" deep. Self-contained steam jacketed unit with natural gas heated steam source contained within unit. Input rated 52,000 btu / hr. 2/3 bottom jacket rate 50 psi at 300 degrees F. Manual tilting with pour lip. Mounted on a base. National Board# 29964, Serial# 29964. 1/60/110 Volt.

MFR: Groen

Groen 100 Gal Steam Jacketed Kettle – 125 PSI | Radicon Drive | TA100 SP

Used Groen Kettle, Model TA100 SP, 100 Gallon, Stainless Steel. Approximately 36" diameter x 30" deep. Open top, hemispherical bottom. Jacket rated 125 psi. Bridge Mounted Radicon Drive with Anchor Agitator. Provision for Teflon Wipers (Wipers not Included). Driven by a 2hp 3/60/230/460 volt, 1755 rpm gear motor 63:1 ratio. Openings top: (2) 4", 2", 1-1/2", 2-1/2" center bottom outlet with 10-1/2" discharge height. Serial# 88772. Mounted on 3 legs.

Used Littleford 100 Cu Ft Ribbon Blender – Sanitary Stainless Steel Mixer

Used Littleford Double Ribbon Blender, Model B100. Total vessel capacity 127 cubic feet, working capacity 100 cubic feet. 304 Stainless steel Sanitary Construction. Density 30-36 LB/Cubic foot. Approximately 120" long x 40" wide x 50" deep trough. hinged covers with safety grate. 4" diameter center bottom discharge with sliding disc valve. Driven by a 40hp, 3/60/460 volt, 1770rpm motor through reducer, 48.8 to 1 ratio. Mounted on carbon steel frame.

MFR: Littleford

Altam Process Knock Out Drum 100 Gallon Horizontal Vessel – 2023

Used Altam Process Knock Out Drum, Approximately 100 Gallon, Stainless Steel. Internal rated 15 psi @ 230 degrees F. Horizontal, dished heads. On stand. Serial# 631, Year 2023.

Ross Model HDM 100 Stainless Steel Double Planetary Mixer

Used- Ross HDM 100 stainless double planetary mixer, 10100 gallon working capacity with 30 hp drive, designed for high viscosity production batches in chemicals, pharmaceuticals, cosmetics, and food. (2) Stirrers approximate orbital speed 30 rpm, stirrer speed 34 rpm. Top dust hood with charge port, bottom fume hood, air/oil lift. Requires a 34'' diameter x 28-1/2'' deep can. Driven an 30 hp, 3/60/460 volt, 1755 XP motor, thru Delroyd Model HV100 reduction gear, 59.4 to 1 ratio. Mounted on an I beam frame. Serial# 37432-1.

MFR: Charles Ross

Used Patterson-Kelley 100 cu. ft. Twin-Shell Vacuum Dryer | 150 PSI / Full Vacuum | 10 HP Hazardous Duty | 304 SS | Serial #204190

Used- Patterson-Kelley 100 cu.ft. twin shell vacuum dryer. Jacket is rated for the 30 psi @ 250 F. The drying chamber is rated for 150 psi and full vacuum. Drying chamber is designed to turn between .96 to 7.66 rpm using a 10 hp reeves drive. Motor is tagged for hazardous location. The outer shell of each chamber measures 56" diameter x 96". The chamber has an 18" access panel. There is a 12" discharge at the bottom. Contact surfaces are constructed of 304 stainless steel and the jacket is carbon steel. Maximum density of product is 75 lbs per cu.ft. Overall dimensions are 19' 9" long x 83" wide x 10'1" tall. Serial # 204190. Requires 460 vac 3 phase electrical supply.

MFR: Patterson Kelley

Used Ross PVM-100 Triple Motion Vacuum Mixer | 100 Gallon | Stainless | High Shear | 3 Mixers | Jacketed

Used Ross Triple Motion Vacuum Mixer, Model PVM-100. Approximately 100 gallon stainless steel jacketed change can. Vacuum-rated system equipped with three independently driven mixing assemblies consisting of a 10 HP three-wing anchor agitator with side and bottom scrapers, 10 HP high speed disperser, and 25 HP high shear rotor stator emulsifier. Unit features a hydraulic lift for raising the mixing head, jacketed vessel for heating or cooling, and includes the control panel. Designed for mixing, dispersing, homogenizing, and emulsifying high viscosity products. Suitable for processing creams, ointments, emulsions, adhesives, sealants, gels, pastes, and other high viscosity products for pharmaceutical, cosmetic, food, and specialty chemical applications. Built 2000.

MFR: Ross Industries

Used JH Day Double Ribbon Blender – Approx. 100 Cubic Foot Stainless Steel

Used- JH Day approximately 100 cubic foot stainless steel double ribbon blender. 40" wide X 120" long X 48" deep. 8" center bottom discharge. Stainless steel covers. Driven by a 20hp 3/60 230/460volt 1760 rpm motor with Stober drive reducer 32.1:1 ratio.

MFR: J H Day

Industrial Unused Heat Transfer Systems Single Pass Shell and Tube Heat Exchanger – 10259 Sq. Ft., Type AEM 71-216

Unused Heat Transfer Systems single pass shell & tube heat exchanger, horizontal Type AEM 71 216, with approximately 10,259 sq ft of heat transfer area. Carbon steel shell with 304 stainless steel tubes, heads, and tube sheets, ASME registered and rated FV/150 psi over typical process temperature ranges., 10259 square feet, horizontal, type AEM 71-216. Carbon steel shell rated FV/150 psi at -20 to 200 deg F. (1785) 1-1/4'' diameter x 18 long 304 stainless steel tubes rated FV/150 psi at 20 to 300 deg F. 304 Stainless steel head and tube sheets. Openings: shell (2) 30, 54; openings for tubes (2) 6''. Saddle mounts. Serial #12928-7, National Board #18459.

MFR: Heat Transfer Systems

Used Ross Planetary Mixer – 400L, 316L SS, Jacketed with Dual Agitation & Emulsifier

Used- Ross Planetary Mixer, Model: 400 liter vessel, 316L Stainless Steel. 400L (105 Gal) working capacity. Approximately 32" diameter x 35" straight side. Flat top, dished bottom. Internal design pressure rated 5 psi at 77 degrees F. Jacket rated 10 psi at 77 degrees F. Top off center entering emulsifier, driven by a 5hp, 3/60/208-230/460 volt, 3480 rpm motor. Top center agitator with (2) 3 blade propeller, driven by a 2hp, 3/60/208-230/460 volt, 1730 rpm motor thru reducer 46.65:1. Opening Top: 7" for agitator, 5", 4-3/4", 3-1/2" with sight glass, 3", (2) 2-1/2", (2) 2", 1", 1-1/2" for agitator, approximately 1" center bottom outlet. Includes spray ball. Mounted on (4) legs. Serial# SF-509A.

MFR: Ross Industries

Used AMK Twin Ribbon Slanting Mixer/Kneader, type VISD 3000

Used- AMK Twin Ribbon Slanting Mixer/Kneader, type VISD 3000. Material of construction is 316 (V4A) stainless steel on product contact parts. Total capacity 105.9 Cu ft/793 gallon (3000 liter), working capacity 98.88/740 gallon (2800 liter). 2 mixing blades inclined at 45. Frame mounted. Used in a pigment paste application. Overall dimensions: 11 4" (3500 mm) long x 88" (2700 mm) width x 12 3" (3780 mm) heigh. Weight 6.7 tonnes. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: AMK

Used Type VISD 3000 AMK Twin Ribbon Slanting Mixer/Kneader.

Used Type VISD 3000 AMK Twin Ribbon Slanting Mixer/Kneader. Material of construction is 316 (V4A) stainless steel on product contact parts. Total capacity 105.9 cu ft/793 gallon (3000 liter), working capacity 98.88 cu ft/740 gallon (2800 liter). 2 mixing blades inclined at 45. Frame mounted. Used in a pigment paste application. Overall dimensions: 11 4" (3500 mm) long x 88" (2700 mm) width x 12 3" (3780 mm) height. Weight 6.7 tonnes. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: AMK