Power Generation Equipment

Used Thermo Scientific Single Use Bioreactor – Model HyClone 1000 Liters

Used- Thermo Scientific Single Use Bioreactor, Model HyClone, 1000 liter capacity, Stainless Steel. Open top, flat bottom shell. 38" diameter x 50" straight side. Dimple Jacket. Operating Temperature Range: Ambient to 40 +/- 0.1 Degrees C (104+/-0.2 DegreesF). 0.5psi Bag Pressure. Includes Brother 3 phase induction motor, 1/2hp 3/60/208-230/460v 1720rpm, 15:1 Ratio. Mounted on Stainless Steel Frame. Serial# H10289-03.

MFR: Thermo Scientific

Used 1000 liter single use bioreactor, Made by Thermo Scientific

Used- 1000 liter single use bioreactor, Made by Thermo Scientific, Stainless Steel. Open top, flat bottom shell. 38" diameter x 50" straight side. Dimple Jacket.Operating Temperature Range: Ambient to 40 +/- 0.1 Degrees C (104+/-0.2 DegreesF). 0.5psi Bag Pressure. Includes AB series A Drive, Brother 3 phase induction motor, 1/2hp 3/60/208-230/460v 1720rpm, 15:1 Ratio. Mounted on Stainless Steel Frame. Serial# H10289-04.

MFR: Thermo Scientific

Shandong HG Machinery 10,000 Liter Fermentation Tank

Unused - Shandong HG Machinery 10,000 Liter Fermentation Tank, 2641 Gallon (85 BBL), 304 Stainless Steel, Vertical. Approximately 78.74" diameter x 137.79" straight side. Dished top, 60 degree cone bottom. Jacket approximately 14m2, test pressure 0.2MPa (29 PSI). Openings top: 102mm (4"), 89mm (3.5"), 51mm (2"), Side: 540mm x 440mm Manhole (21.25" x 17.3"), 38mm (1.5"), 19mm (.75"). 1-1/2" Side cone outlet, 818mm (32.2") discharge height. 1-1/2" Center bottom outlet, approximate 60mm (2.36") discharge height. Mounted on (4) legs. Approximate 87" x 87" x 236" tall, 3400 lb

Used Horizontal 316L Stainless Steel Tate Metalworks Tank, approx. 26,700 gallon capacity

Used- Horizontal 316L Stainless Steel Tate Metalworks Tank, approx. 26,700 gallon capacity. 10 diameter X 44 long straight side; Top Fittings: (2) 30" manways, (1) 1", (1) 2", (2) 3", (3) 4"; Has one bottom end 4" outlet; Dished ends; Ends certified by Trinity Industries; Mounted on saddles; 12-6" shipping height. Previously stored Sulfuric Acid.

Used National Board Certified Precision Stainless 103 Liter / 27.2 Gallon Jacketed Tank

National Board Certified Precision Stainless 103 Liter / 27.2 Gallon Jacketed Tank, 316L Stainless Steel, Vertical. Approximate 20" diameter x 26" straight side. Dished removable top head, dished bottom head. 304L Stainless steel dimple jacket, rated 100psi / FV at -20 to 250 degrees F. Internal rated 45psi / FV at -20 to 250 degrees F. Openings: (5) 3", (1) 1-1/2". (2) 1", 1-1/2" Center bottom outlet with approximately 8-10" discharge height. (4) internal baffles. Mounted on (4) legs with casters. Serial# 8080-5, National Board# 5375. Used as Freeze / Thaw Vessel.

Used Sauer WP6208 BasSeal Helium Compressor | 1000 m³/h | 53.8 Barg | 270 HP | 2023

Used Sauer WP6208 BasSeal Helium Compressor | 1000 m/h | 53.8 Barg | 270 HP | 2023. 6 cylinder, 2 stage, 1000 cubic meters per hour volumetric flow rate, max. working pressure 53.8 barg. Discharge relief valve set pressure 56.5 barg, water cooled. Complete with controls, fully automated with HMI screen and mounted on a steel skid. 270 HP, 460/3/60, 307 FLA. Serial number 113730, new in 2023. Previously used for testing a NASA system. Reported to have 47.9 run hours.

Used Alfa Laval / Sharples Super-D-Canter DS-706 Centrifuge – 300 HP, 317 Stainless Steel

Used- Alfa Laval / Sharples Super-D-Canter DS-706 Centrifuge, 317 Stainless steel construction on product contact areas, maximum bowl speed 2600 rpm, 10" single lead conveyor with STC wear protection tiles, casing with stainless top cover, gearbox (95:1 ratio), air cooled lube system, 300 hp drive motor and sub-base with VFD, 3/60/460 volt, 1780 rpm, safety guards, feed pipe, backdrive stand and 75 hp motor, operations and control panels.

MFR: Alfa Laval

Used Caldwell tanks 2900 gallon stainless steel vertical tank. Serial # 5658-3. Tank is 90" in diameter with a 90" straight side height. 12" dome top has a 24" bolted man cover, (2) 2" threaded fit...

Used-Caldwell tanks 2900 gallon stainless steel vertical tank. Serial # 5658-3. Tank is 90" in diameter with a 90" straight side height. 12" dome top has a 24" bolted man cover, (2) 2" threaded fittings, an 1" threaded fitting, a 3" flanged fitting and an 8" flanged fitting. Top also has a 40" tall saftey railing around the tank. The 12" dish bottom has a 2" center discharge. Tank also has a 2" fill from bottom tube running from the top. Tank sits on 4 I-beam legs for a total height of 164". Good condition.

Used Tolhurst 30” Basket Centrifuge | Top Unload | 0–1000 RPM | Stainless Steel

Used- Tolhurst Basket Centrifuge, Size 30", 0-1000 basket rpm, 70lbs/cu. ft maximum throughput. Stainless steel contact parts. Top Unload, Perforated basket. stainless steel bolt on top with clamp down cover, 6" sight glass. Cover has (2) 2-1/2" threaded inlets. Vessel approximately 30" diameter x 18" straight side. 4" side bottom outlet down to 1-1/4" threaded. 3 point mount on carbon steel frame with casters. Serial# TA-38533. Includes Hydraulic Drive skid, driven by a 7.5hp 3/60/230/460v 1175rpm motor through reducer, and a mounted Control Panel.

MFR: Tolhurst

Used Coaire CAS30S24 30 HP Rotary Screw Air Compressor With Schulz Dryer

Used Coaire Model CAS30S24 oil-injected, fixed-speed rotary screw air compressor, Serial #SS030HG187, with Schulz Model ADS 125 non-cycling refrigerated compressed air dryer, Serial #210009427. The Coaire CAS S-Series is a fixed-speed industrial rotary screw compressor line featuring a high-efficiency motor and cooler with direct or gear drive. The CAS030S is rated at 30 HP, with published S-Series capacities ranging from 127 CFM at 100 psi, 124 CFM at 125 psi, and 111 CFM at 150 psi depending on configuration. Included Schulz ADS 125 refrigerated air dryer has a nominal capacity of 125 SCFM, 1-1/4" NPT-F inlet/outlet connections, 115V/1-phase/60 Hz electrical service, and an 88 lb net weight. The dryer is designed to remove moisture from compressed air before it reaches downstream equipment.

MFR: Coair

Used Trans Food Tech Pre-Mixing System | 300 Gallon Skid-Mounted Mixer

Used Trans Food Tech Pre-Mixing System | 300 Gallon Skid-Mounted Mixer. 41" straight side x 45" diameter tank dimensions, flat bottom. Scrape agitation. Has SPX product pump. With stainless steel electrical control cabinet. Mounted on skid. Built 2018.

MFR: Trans-Tech

Blue Star VD300-01 300 kW Diesel Generator – 480/277V Standby Power Unit

Used Blue Star Power Systems Model VD300-1 300 kW Standby / 275 kW Prime Diesel Generator Set With Volvo Penta Engine, Built 2018. Low-hour diesel generator rated for 300 kW standby power and 275 kW prime power, powered by a Volvo Penta Model TAD1351GE diesel engine rated at 456 HP at 1,800 RPM. Engine meets EPA Tier 3 emissions standards. Generator produces 277/480 volts, 3-phase, 60 Hz electrical output and features a 12-lead reconnectable alternator for alternative voltage configurations. Equipped with a 400-amp main-line circuit breaker, permanent magnet generator (PMG) excitation system and Basler DGC-2020 digital generator control panel. Additional features include an engine coolant heater, weather-protective enclosure and UL-listed sub-base diesel fuel tank with secondary containment. Generator assembly is UL listed for stationary power applications. Unit has approximately 121.4 recorded operating hours. Generator Serial #103448-1-1. Volvo Penta Engine Serial #2013746570. Manufactured in 2018. Possible applications include standby and emergency backup power generation for manufacturing facilities, warehouses, commercial buildings, water treatment facilities, agricultural operations, telecommunications infrastructure and other suitable industrial or commercial facilities requiring reliable 300 kW diesel-powered electrical generation.

MFR: Blue Star Power Systems