Pharmaceutical Equipment

Used Carman Vibrating Fluid Bed Dryer, also including a Blower Unit and an Electric Process Air Heater. Carman Fluid Bed Model FB-50, equipped with 2 vibrators of 1 hp, Single zone, 11" wide x 72" ...

Used Carman Vibrating Fluid Bed Dryer, also including a Blower Unit and an Electric Process Air Heater. Carman Fluid Bed Model FB-50, equipped with 2 vibrators of 1 hp, Single zone, 11" wide x 72" long perforated bed. The Unit overall dimensions are 44'' x 93'' x 75''. The serial Number is FB-10522. There is no ductwork, controls stands or springs included. Stainless steel contact parts. The Supply-Side Equipment: - New York Blower Co. series 20GI FAN 194 LS. Driven by a 15hp Weg Motor, 1760 rpm. Power required 208-230/ 460 vac3. The Unit dimensions are 61" x 62" x 46". - Process Air Heater CAT no. 164x221428. Has an outlet Temperature of 575 F. 150kw. Power required 460 vac3. The Unit overall dimensions are 50" x 100" x 45". All these items are insulated and appear to be in good condition.

MFR: Carman

Used Eiger Machinery model 40L SSE EXP horizontal media mill has a 40 L carbon steel milling chamber driven by a 40 hp, 1165 rpm motor that requires 230/460 vac, 3 ph electricity. Motor is tagged for...

Used-Eiger Machinery model 40L SSE EXP horizontal media mill has a 40 L carbon steel milling chamber driven by a 40 hp, 1165 rpm motor that requires 230/460 vac, 3 ph electricity. Motor is tagged for hazardous locations. Includes operating controls and diaphragm pump. Overall dimensions are 57" w x 36" l x 75" h. Serial no. 1430.

MFR: Eiger

Used Eiger Machinery model ABM 40H EXP horizontal media mill has a 40 L carbon steel milling chamber driven by a 40 hp, 1175 rpm motor that requires 230/460 vac, 3 ph electricity. Motor is tagged for...

Used-Eiger Machinery model ABM 40H EXP horizontal media mill has a 40 L carbon steel milling chamber driven by a 40 hp, 1175 rpm motor that requires 230/460 vac, 3 ph electricity. Motor is tagged for hazardous location. Includes operating controls and diaphragm pump. Overall dimensions are 64" w x 36" l x 80" h. Serial no. 06122.

MFR: Eiger

Used Premier Mill Corp. horizontal media mill, model ML1.5 The mill has a 1.5 Liter capacity, Jacketed stainless steel chamber, rated 0-20 liters/hr output, with pump, mounted in self contained hous...

Used Premier Mill Corp. horizontal media mill, model ML1.5 The mill has a 1.5 Liter capacity, Jacketed stainless steel chamber, rated 0-20 liters/hr output, with pump, mounted in self contained housing. Driven by a 5 hp main motor and a 1/3 hp pump motor. Required voltage 230 V ph3, 60Hz. Serial number HML 1.5.91403.98.0228. Overall 27" x 37" x 43".

MFR: Premier

Used Becker Pumps Corp oil flooded rotary vane vacuum pump. Model U4.400 SA/K. Vacuum pump has a pumping speed of 283 cfm and a vacuum to 2.5 Torr. Pump has a 3" NPT inlet and a 4" NPT outlet. The pu...

Used-Becker Pumps Corp oil flooded rotary vane vacuum pump. Model U4.400 SA/K. Vacuum pump has a pumping speed of 283 cfm and a vacuum to 2.5 Torr. Pump has a 3" NPT inlet and a 4" NPT outlet. The pump is driven by a 15 hp 1165 rpm motor. Serial number 1469721. Requires 230/460 vac 3 phase electrical supply.

Used Stokes Vacuum Shelf Dryer, Model #338-4. Max operating pressure is 50 PSI. The dryer has 14 steam ports on 3.5" vertical centers and the door has one-6” opening, one -9" diameter sight glasses, ...

Used-Stokes Vacuum Shelf Dryer, Model #338-4. Max operating pressure is 50 PSI. The dryer has 14 steam ports on 3.5" vertical centers and the door has one-6” opening, one -9" diameter sight glasses, and one-8” opening. There are no shelves included. There are also two inspection windows missing. Inside dimensions 49.5" wide x 49.25" tall x 45.5" deep. Serial # P-77304. Overall 70” x 66” x 80”. This would make a nice vacuum chamber.

MFR: Stokes

Used ACS Ancaster Conveying Systems model MD 8" QC-R-SS stainless steel sanitary rotary air lock. It has (8) 3" talll vanes on its rotor. The rotor assembly is polished to 150-180 grit finish. It ha...

Used-ACS Ancaster Conveying Systems model MD 8" QC-R-SS stainless steel sanitary rotary air lock. It has (8) 3" talll vanes on its rotor. The rotor assembly is polished to 150-180 grit finish. It has 8" inside diameter inlet/outlet flanges. Quick clean design has removable end that slides on guides for easy clean out. Also has air purge seals. Driven by 1 hp WEG motor and gearbox assembly that turns vanes at 20 rpm. Requires 208-230/460 vac 3 ph electrical supply. Good Condition. Low hours, project cancelled.

Used ACS Ancaster Conveying Systems model MD 8" QC-R-SS stainless steel sanitary rotary air lock. It has (8) 3" talll vanes on its rotor. The rotor assembly is polished to 150-180 grit finish. It ha...

Used-ACS Ancaster Conveying Systems model MD 8" QC-R-SS stainless steel sanitary rotary air lock. It has (8) 3" talll vanes on its rotor. The rotor assembly is polished to 150-180 grit finish. It has 8" inside diameter inlet/outlet flanges. Quick clean design has removable end that slides on guides for easy clean out. Also has air purge seals. Driven by 1 hp WEG motor and gearbox assembly that turns vanes at 20 rpm. Requires 208-230/460 vac 3 ph electrical supply. Good Condition. Low hours, project cancelled.

Used VAV Scan vibratory Conveyor. Stainless steel construction. Conveyor pipe of 16" diameter and 148" long.Has clean openings on boths ends. The unit has three 6" inlets/outles and two 12" inlets/...

Used VAV Scan vibratory Conveyor. Stainless steel construction. Conveyor pipe of 16" diameter and 148" long.Has clean openings on boths ends. The unit has three 6" inlets/outles and two 12" inlets/outlets. ith 2 vibro motor, 1200 rpm each. Has a support floor mounting with 4 springs and 4 schocks absorbant. 38" in the tall end and 10" in the short end. The unit number is : 29751 and year: 1991.

Used VAV Scan vibratory Conveyor. Stainless steel construction. Conveyor pipe of 16" diameter and 148" long. Has clean out openings on boths ends. The unit has three 6" inlets/outles and two 12" inl...

Used VAV Scan vibratory Conveyor. Stainless steel construction. Conveyor pipe of 16" diameter and 148" long. Has clean out openings on boths ends. The unit has three 6" inlets/outles and two 12" inlets/outlets. Equipped with 2 vibro motors, 1200 rpm each. Has a support floor mounting with 4 springs and 4 schocks absorbant. 41" in the tall end and 8 1/2" in the short end. The unit number : 29759 and year: 1991.

Used This is a Szegvari Union Process model 1SD, Type B attritor mill system. Its serial number is 990702. Stainless steel contact parts. It is equipped with a 5 hp explosion proof varidrive, tach...

Used-This is a Szegvari Union Process model 1SD, Type B attritor mill system. Its serial number is 990702. Stainless steel contact parts. It is equipped with a 5 hp explosion proof varidrive, tachometer and jacketed bowl. The bowl has a total capacity of 1.5 gallons with a workin capacity of 0.8 gallons. 230/460 vac 3 ph power required. This unit comes with a 38 gallon jaketed mix tank with dispersion and side scraping agitation and also a diaphragm pump. This is a nice system that can be used for wet or dry milling. Good condition.

MFR: Union Process

Used Fluid Air PolarDry 050 Electrostatic Spray Dryer – 50 kg/hr

Used- Fluid Air PolarDry Model 050 Electrostatic Spray Dryer 50 Kg/Hr Evaporation Capacity. Designed for GMP processing with nitrogen drying and atomizing gas. Rated for maximum evaporation capacity of 50 kg/hr, maximum drying gas inlet temperature of 140 C, maximum drying gas flow of 1,870 m/hr, and design vacuum of 12 kPa. Atomizing gas specifications include maximum inlet temperature of 150 C, maximum pressure of 4.14 bar, and design flow of 100 m/hr. Features stainless steel spray chamber with FDA-approved PTFE liner, electrostatic atomization technology, pneumatic powder collection and conveying system, (3) reverse-pulse cartridge filters, HEPA filtration, dehumidification coil, drying gas heater, blower, and oxygen monitoring safety system. Equipped with Watson Marlow peristaltic feed pump, Allen-Bradley PLC with Batch Architect control system, operator HMI, stainless steel process skid, and elevated access platform with stairs. Product contact surfaces include 316L stainless steel and FDA-approved PTFE. Electrical requirements include 480V, 3-phase, 60 Hz. Possible applications include pharmaceutical, nutraceutical, biotechnology, food ingredient, and specialty chemical spray drying of compatible liquid formulations into powdered products.

MFR: Fluid Air