Pharmaceutical Equipment

Used American Extrusion International One-Pass Oven Dryer, Model 1P1036SAE – Continuous Stainless Steel Dryer Rated Up to 1,000 Lbs/Hour

Used American Extrusion International One-Pass Oven Dryer, Model 1P1036SAE Continuous Stainless Steel Dryer Rated Up to 1,000 Lbs/Hour. Designed for continuous drying applications with production rates of up to 1,000 pounds per hour, depending on product characteristics and application requirements. The unit features a single-pass design with an operating temperature of approximately 350F (50F) and an adjustable product residence time ranging from 1.5 to 8 minutes. Equipped with a Pentair, Model N360846G050 air conditioning system rated for 7777/8166 BTU per hour cooling capacity, the system operates within a temperature range of 50F to 131F and utilizes R134A refrigerant. The refrigeration system is rated for a maximum high-side pressure of 404 PSIG and a low-side pressure of 181 PSIG. Additional features include a user-friendly touchscreen HMI for process monitoring and control, stainless steel construction for durability and sanitation, and leveling feet for stable installation. Overall dimensions are approximately 250" long, 82" wide, and 94" high, 6000#. Electrical requirements are 460 volts, 3 phase, 60 hertz. Serial # 1954-1P1036SAE, Built 2014. This oven dryer was previously utilized in a snack food drying application.

Used Flottweg Z3E-4/401 Decanter Centrifuge – 5,250 RPM

Used 2023 Flottweg Decanter Centrifuge, Model Z3E-4/401, with only 228 operating hours. Unit has a maximum bowl speed of 5,250 RPM, maximum sediment density of 1.6 kg/dm3, stainless steel product contact areas, food-grade construction, and an 8 degree cone angle. Driven by a 15 HP main drive motor with 10 HP scroll drive and equipped with an upgraded automatic grease system and upgraded AC unit built into the control panel. Centrifuge is mounted on four legs and configured for 3-phase, 60 Hz, 480 VAC electrical service. Serial number 200102437. Previously processing food-grade liquids. Possible applications and suitable products include food processing, liquid-solid separation, clarification, concentration, and dewatering processes compatible with a food-grade decanter centrifuge.

MFR: Flottweg

BAC Baltimore AirCoil 33620-2TR Cooling Tower, 3,600 USGPM

Used BAC Baltimore AirCoil 3000 Series Cooling Tower, Model 33620-2TR. 3,600 USGPM of water from 95 degrees F to 85 degrees F entering air wet bulb temperature and 6.45 psi fluid pressure drop. Fan driven by 50HP, 3/60/460 volt, 1800rpm motor. Galvanized cold water basin with 4" connections. 34" x 35" Access doors. Serial # U0021209. Built 2000.

Used BAC Baltimore AirCoil 3000 Series Cooling Tower, Model 33620-2TR

Used-BAC Series 3000 Cooling Tower. Heavy Gauge Panel Construction. 4 in Cold Water Connections, Connections Less Than 4 in Are Provided with Male Pipe Threads. Casing Constructed of Fiberglass-Reinforced Polyester Panels. hinged 34 in x 35 in Access Doors. Wave Formed Air Inlet Louvers. (2) 150# Stud Circle Hoy Water Inlet Connections Per Cell on Top of Unit. Gravity Type Hot Water Basins. BACross Wet Deck Surface and Drift Eliminators Formed From PVC. Axial Flow Aluminum Fans. Heavy Gauge Fan Guards. 3,600 USGPM of Water From 95 Degrees F to 85 Degrees F with 78 Degrees F Entering Air Wet Bulb Temperature and 6.45 PSI Fluid Pressure Drop. (1) 50 HP 1800 RPM TEFC Fan Motor. Baltibond Corrosion Protection System. Ladder and Safety Railing. Dual Top Inlet Connections with Flow Control Valves. Extended Lube Lines.

Used Novasep HIPERSEP P Automated Liquid Chromatography System

Used Novasep Automated Liquid Chromatography System, Type HIPERSEP PILOT. Pilot-scale purification platform designed for high-precision, automated separation processes used in pharmaceutical, biotechnology, nutraceutical, food, and specialty chemical applications. Engineered for reliable scale-up from laboratory development to pilot production, the system operates at 0 to 100 Bar service pressure, 5 to 60C temperature range, and is powered by 280 VAC, 60 Hz. It features fully automated process sequences including loading, elution, washing, regeneration, and cleaning cycles to ensure consistent performance and reduced operator intervention. Suitable for ion exchange, reverse phase, size exclusion, affinity, and adsorption chromatography applications such as purification of proteins, peptides, enzymes, monoclonal antibodies, vaccines, APIs, and specialty compounds, offering a reliable and efficient solution for process development, clinical production, and pilot-scale manufacturing. Serial # 3686-H, Built 2020.

Used Andritz Gouda T15/40KD Double Drum Dryers – 408 Sq. Ft. Drying Area Each | Lot of (2)

Used- Lot of (2) Andritz Gouda Double Drum Dryers, Model T15/40KD. Drums: 1508 MM (59.37") diameter x 4000 MM (157.48") face, cast iron rolls, not chrome plated. 204 square feet per drum / 408 square feet total drying area per dryer. Drums rated for 13 bar design pressure at 195C maximum, steam heated, 6,125 liter volume per drum. 1.515 RPM drum speed. 18.5 kW drive. Two (2) discharge augers, 560mm diameter x 5,995mm long, each driven by a 1.5 kW motor at 80 rpm. Equipped with stainless steel hood and hydraulic bearing lube system. CE marked. Built 2021.

MFR: Andritz

Used CAT Solar Turbines Centaur 40 Natural Gas Turbine Power Package – Approx. 3.7 MW

Used- Cat Solar Turbines Turbine Package. Approximate output of 3.5 MW per unit/Approximately 7 MW total. Natural gas powered. Consists of (2) Solar Turbine Model Centaur 40; Exhaust systems; Gas-fired burner systems; Associated electrical infrastructure. Configured for venting or integration with steam generation systems. Serial# HG85083 and HG85093. Reported approximate 30,000 operating hours.

MFR: Solar

Used ACS Atlantes Chemical Systems 24" x 24" Plate & Frame Filter Press – 21 Polypropylene Plates with Enerpac Hydraulic Closure

Used ACS (Atlantes Chemical Systems) Plate and Frame Filter Press. (21) 24" x 24" Polypropylene Filter Plates. Approximately 3" diameter center hole, (4) 1-1/4" corner holes. Unit is mounted on a heavy-duty carbon steel frame and includes an Enerpac hydraulic plate-closing system, lower cake-discharge hopper with 42" discharge height.

MFR: ACS

Used Jenbacher JGS-416 1.127 MW Natural Gas Generator – 4,160V Enclosed Power Package with Switchgear

Used- Jenbacher Natural Gas Generator Package, Model JGS-416. Rated 1.127 MW. Approximately 96% generator efficiency. Includes fully enclosed transportable weatherproof building and switchgear. 1800 RPM. 1573 bhp motor. 60hz/4160V. Built 2011. Reported 67,000 hours.

MFR: Jenbacher

Used Orbis Machinery SBM-7272-170 1,269-Gallon Jacketed Horizontal Ball Mill – 150 HP, AR-400 Steel

Used- Orbis Machinery Model SBM-7272-170 jacketed horizontal ball mill with approximately 1,269-gallon (169.7-cu.-ft.) cylinder capacity, designed for a maximum media loading of approximately 25,380 lb. of steel media at 50% volume and dry-product loading of approximately 42.5 cu. ft. at 25% volume. The cylinder inner shell and heads are constructed of abrasion-resistant AR-400 steel, the jacket shell is SA-516 Grade 70 carbon steel, and the dry-discharge shroud and support stands are A-36 or better structural steel. The cylinder is rated for atmospheric pressure, and the jacket is rated for 15 PSIG at 250F. Equipped with a 150 HP C-face TEFC motor with brake, rated 460-volt, 3-phase, 60-Hz, and a hollow-bore C-face gear reducer providing a maximum cylinder speed of 22 RPM, reduced to 20 RPM through a variable-frequency drive. Includes a dry-product discharge shroud, cylinder indexing system with sensor and target disc, dual-flow 3-inch NPT rotary union, siphon-tube assembly, shaft seals, two 8-15/16-inch-bore pillow-block bearings, drive-end and idler-end support stands, a 20" x 20" inch loading hatch with tool-free quick-opening handles, 14" x 16" inspection opening with bolt-on cover, approximately 10" x 10" bottom discharge with drilled flange for a customer-supplied valve, vibrator mounts, 2-1/2" NPT jacket-feed connection, 1-1/4" NPT jacket-return connection, and stainless-steel jacket piping, fittings, unions and flexible hose assemblies. Approximate overall dimensions are 247-7/8" long x 96 inches wide x 154-1/16" high, with an approximate machine weight of 34,000 lb.

Used Hemraj PSD 02 Stainless Steel Spray Dryer – 22 Lb/Hr Water Evaporation, Two-Fluid Nozzle Atomization

Used Hemraj PSD 02 Stainless Steel Spray Dryer 22 Lb/Hr Water Evaporation, Two-Fluid Nozzle Atomization. 316 stainless steel contact parts. 304 stainless steel non-contact parts. 36" diameter x 69" straight side chamber size. Two-fluid compressed air nozzle atomizer 10 kg/hour (approximately 22 lbs/hour) water evaporation capacity. 14.5 kg/hour (approximately 32 lbs/hour) feed rate w/ 30% dry solids feed. 4.5 kg/hour (approximately 10 lbs/hour) powder rate. Ambient- 260 degrees C (500 degrees F) inlet temperature. 95-100 degrees C (203-212 degrees F) outlet temperature. 30-40 degrees C (86-104 degrees F) ambient temperature. 760mm Hg atmospheric pressure. 50% relative humidity. Blown down" powder collection method. Electric air heater heat source. 3/50/440V electric motor. Built 2014. Previously used for organic biopesticides.

Used Makwell MWM-350L 350-Liter Vacuum Emulsifying Mixer – 316L SS Homogenizer with Steam Generator & Auxiliary Tanks

Used- Makwell Machinery Vacuum Emulsifying Mixer, MWM-350L. 316L stainless steel contact parts. 350 liter design capacity, 300 liter maximum working capacity, 110 liter minimum working capacity. Components include emulsifying pot, oil pot, and water pot. Features hydraulic lifting and tilting system, upper homogenizer/sweep wall stirrer, vacuum pump, and temperature controller. With platform, 72 kW steam generator, 500 liter storage tank, 1,000 liter/hour diaphragm pump, and transfer pump. Built 2023.

MFR: Makwell