Pharmaceutical Equipment
Stock No.:
53864003Used Glatt CPCG 5 Fluid Bed Dryer – Stainless Steel – Spray Granulation – Steam Heated – 5.5 kW Blower – 1996
Used- Glatt Fluid Bed Dryer Model CPCG 5. Stainless steel construction with spray granulation and drying inserts, 2 bar shock rating, 5.5 kw blower, 460 volt, steam heated with control panel, serial 6345. Built 1996.
MFR: Glatt
Stock No.:
53904004Unused 2024 3,000 Liter Hastelloy C22 Agitated Nutsche Filter Dryer
Unused 2024 Sachin Industries 3,000 Liter 316 Stainless Steel / Hastelloy C-22 Clad Agitated Nutsche Filter Dryer (ANFD), GMP Design. Vertical batch-type agitated Nutsche filter dryer featuring 3,000-liter capacity, 316 stainless steel construction with Hastelloy C-22 (HC22) cladding, detachable bottom assembly, and provisions for HC22 filter mesh media or polypropylene (PP) filter cloth. Designed for integrated solid-liquid separation, cake washing, agitation, and vacuum drying within a single enclosed vessel. Equipped with a top-mounted motorized agitator assembly, hydraulic plug-type discharge valve, multiple process connections, and stainless steel support structure. Includes single-bag 316 stainless steel dust collector for capturing fines during the drying cycle and a 120 cubic meter per hour water ring vacuum pump with HC22 product-contact components, 7.5 HP motor, 1,440 RPM, 4-pole, 60 Hz, specified for US NEC Class I, Division 2 applications. Also includes a mother liquor priming pump with HC22 contact components, 5 HP motor, 1,440 RPM, 4-pole, 60 Hz, and Class I, Division 2 specifications. Additional components include miscellaneous HC22 and 316 stainless steel piping, valves, fittings, and instrumentation. Manufacturer engineering drawings available. Suitable for potential applications involving pharmaceutical intermediates, active pharmaceutical ingredients (APIs), specialty chemicals, fine chemicals, solvent-containing solids, and other processes requiring contained filtration, washing, and vacuum drying.
Stock No.:
53904005Unused 5,000 Liter Hastelloy C22 Clad Rotary Vacuum Paddle Dryer System – 2024
Unused 2024 Sachin Industries 5,000 Liter 316 Stainless Steel / Hastelloy C-22 Clad Horizontal Reactor System With Heated Agitator, Condenser, And Receiver. Heavy-duty horizontal process reactor featuring 316 stainless steel construction with Hastelloy C-22 (HC22) cladding and a motor-driven internal shaft and drum assembly. Equipped with an externally mounted electric motor, belt drive, gear reducer, and specially designed rotary pressure joint for heating the hollow agitator drum and paddles. Includes actuated anti-cavity V-notch discharge valve with HC22 product-contact components, actuated V-notch charging valve with HC22 contact components, and a top-mounted charging hopper fabricated from 3 mm thick HC22. Features a multi-bag dust collector with HC22-supported filter cages, five HC22 filter cartridges, vacuum connection for moisture and solvent vapor extraction, and jacketed dust collector housing to minimize condensation during drying operations. Includes two sets of sight glasses and light glasses for visual process monitoring. Supplied with a 10 square meter vertical glass-lined shell-in-shell condenser with mild steel construction, insulation, and external cladding, along with a 1,000-liter vertical glass-lined receiver equipped with level indicators, provisions for pressure and vacuum transmitters, bottom discharge valves, insulation, and cladding. Internal and external stainless steel surfaces specified as acid cleaned, with external unmachined mild steel surfaces finished with two coats of red oxide primer. Manufacturer engineering drawings available. Originally specified with installation qualification (IQ), operational qualification (OQ), and performance qualification (PQ) services at the client's site. Suitable for potential applications involving chemical processing, solvent recovery, vacuum drying, and specialty chemical production.
Stock No.:
53913001Used Olson / V-RAM Double By-Products Pumping System | 5,000 lbs/hr | Dual 50 HP Hydraul
Used Olson Mfg. Co. dba V-RAM Pumps Double By-Products Pumping System. (2) Identical Stainless Steel Pumps, approximately 5000 lbs/hr working capacity, with 679 max psi per each pump. 30-1/2" long x 14" wide x 15-1/2" deep infeed. Approximately 54" long trough with 11" ram head. 6" diameter outlet with gate valve, 10" discharge height. Includes Double B-Style Hydraulic Unit skid with air cooler. (2) 50hp 3/60/230/460v 1775rpm motors. Includes Control Panel.
Stock No.:
53928001Valmet Pre-Compression Plug Feeder & Shredder System – 1000 BDST/D Biomass Capacity
Unused Valmet Plug Screw Feeder with Pre-Compression Screw and Shredder. Designed for infeed raw material chips density 100 kg/m3, moisture content 20-48%, design flow rate 530 dry tons per day soft wood chips, (500BDST/D); Max capacity 1000 BDST/D; Turndown rate 50%. Valmet plug screw feeder: Fed by a pre-compression screw section, and 48" shredder at outlet; 850 HP Siemens motor 1750 rpm 460v 3/60; Gear Reducer ratio 25:1. Nominal speed 69 rpm, range 35-105 rpm; Inlet 35.83" x 25.79". Pre-compression screw: Materials of construction stainless steel 304L for all contact parts; Sits on top of plug screw at 90 degrees with s 24" diameter top force feed; Capacity Volume/Revolution inlet/discharge: 45 L / 22.5 L. Capacity / revolution at 110 kg/m3 = 5.46 BDST/D and net max capacity at 110 kg/m3 = 530 BDST/D; 250 HP motor 1750 rpm 460v 3/60 v-belt drive to gear reducer V-belt reduction 1:52; Gear reducer SEW Eurodrive ratio 18:1. Final rpm nominal speed 65 rpm, range 45-97 rpm; Outlet: 35.83" x 25.79". T-Pipe 48" Shredder: Fed from plug screw feeder 24" biomass inlet; MAWP 350 psig at 800F; 100 HP motor 1750 rpm 460v 3/60; Gear reducer 8.9:1 for nominal 197 rpm; Outlet 24" flange 600#. All equipment never used, new in 2020. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.
Stock No.:
53960001Used Battery Recycling Systems Lead Refining Kettle Air Filtration System – 30,000 CFM, 150 HP Blower, Bag House, BRS/Wirtz
Used- Battery Recycling Systems, Inc. a sub-div. of Wirtz. Complete system consisting of a Lead Refining Kettle Air Filtration System. This system captures exhaust and fumes from the lead refining process through a sanitation hood mounted on the refining kettle, directing them into a bag house air filtration unit. The setup features a multi-cell bag house configuration with drop-out boxes, approximately 60 feet of internal plant ducting connected to each kettle's sanitation hood, a specialty air recirculation blower, and an automatic filter bag cleaning system with integrated dust collection. Processed air is discharged via a chimney stack, which must be constructed on-site by the customer per BRS prints due to its size. The system operates on 460V, 3-phase, 60Hz, with 3-wire and 24 VDC control voltage. It includes standard fasteners, uses English units, requires layout approval, and features equipment painted in RAL-5015 (Sky Blue) for carbon steel components and RAL-1018 (Zinc Yellow) for safety guards. NEW YORK BLOWER BC-30 SIZE 36 BC ARR-1 POS-Z CW ROTATION TAU DISCHARGE FLANGED MOTOR; INTEGRAL TE 150HP 1800RPM 3-60-460 PREMIUM EFF. 445T BALDOR, CAPACITIES: 30000 CFM, 18IN WG, 2207RPM, 132BHP, 0.0607 LB/FT^3, 4400FT 70 F.
Stock No.:
53989001New MKM CD 250 Atomizer – 9000–13,000 RPM, SS316 Spray Disk, RPM Sensors, Insulated Jacket
Unused / New MK Manufacturing Co, Atomizer, Model MKM CD 250 features a feeder cover, retainer, sleeve, and feeding pipe made from SS 316 stainless steel, all tested, machined, and balanced as required, the spray disk is also SS 316, precisely machined and balanced, the main shaft is constructed from special spring steel with centerless grinding for high precision, bearing housing is fabricated from mild steel with cylindrical surfaces to accommodate bearing seats, the shaft is driven by a V-belt pulley system, operating speed ranges from 9000 to 13000 RPM and includes RPM sensors and a digital display, the atomizer jacket is insulated with ceramic wool, air purging is provided to prevent sediment buildup and ensure continuous spray dryer operation, lubrication is handled by an MKM make pump with motor, double filters, and gauges for continuous oil flow, the unit is supplied without a motor, compatible with a 25 HP, 2900 RPM flange-mounted Siemens or Hindustan motor, the atomizer pulley is made from SS 304 while the motor pulley is made from cast iron or mild steel. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.
Stock No.:
53989002New MKM CD-210 Rotary Disk Atomizer – SS316, 19,000 RPM, F-35 Compatible, Includes Toolkit
New MKM CD-210 Rotary Disk Atomizer SS316, 19,000 RPM, F-35 Compatible, Includes Toolkit. Constructed of 316 stainless steel. The atomizer features key components in SS 316 stainless steel, including the feeder cover, retainer, sleeve, feeding pipe, and spray disk (?210 mm), all precision-machined and dynamically balanced at 19,000 RPM. The main shaft is spring steel, centerless ground for high concentricity and strength. The mild steel bearing housing includes precision-machined seats for alignment. Power is delivered via a V-belt pulley system. Operating speed matches existing F-35 units, with jacket and dimensions ensuring full interchangeability. An MKM oil pump system provides continuous automatic lubrication, with oil temperature maintained below 75C at 10 TPD. RPM range: 9,00018,000; vibration remains within specified limits. Includes RPM sensor/display and a maintenance tool kit with pullers, spanners, and locknut tools. Compatible with and replacement for an F-35 atomizer. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.
Stock No.:
54014006Unused Ethanol Distillation Packed Column System – 25' High with Enerquip Heat Exchangers
Unused- Ethanol Fractional Distillation Packed Column, 25' High. (1) Enerquip Shell & Tube Heat Exchanger, reboiler, model HX 14/30 x 96 BKUH, 304L, 6 FLG. (1) Enerquip Shell & Tube Heat Exchanger, Condenser, Model HX 20 X 72 BEUBV, 304L, 6 FLG. Includes auxiliary equipment.
