Pharmaceutical Equipment

Unused Ethanol Distillation Packed Column System – 25' High with Enerquip Heat Exchangers

Unused- Ethanol Fractional Distillation Packed Column, 25' High. (1) Enerquip Shell & Tube Heat Exchanger, reboiler, model HX 14/30 x 96 BKUH, 304L, 6 FLG. (1) Enerquip Shell & Tube Heat Exchanger, Condenser, Model HX 20 X 72 BEUBV, 304L, 6 FLG. Includes auxiliary equipment.

Used GEA Westfalia UCD 205-00-02/32c Decanter Centrifuge – 5500 RPM, 2-Phase, Stainless Contact, WWT Application – 2011

Used- GEA Westfalia UCD 205-00-02/32c Decanter Centrifuge. Stainless steel construction (product contact areas), max bowl speed 5500 rpm, 2 phase separation (liquid/solids) design, single row of lined cake solids discharge ports, base, casing, gearbox. On 4 legs. Previously used in an WWT application. Serial# 8860-355, built 2011. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Westfalia

Pre-Owned Dispermat CA40-C1 Lab Dissolver – 50?mm Saw Disc with Control Panel

Used VMA-Getzmann Lab Dissolver, Type Dispermat CA40-C1. Stainless steel in product contact parts. 11.7" (300 mm) shaft. 1.95" (50 mm) dia. saw disc. Complete with control panel. Serial # A1000637. New year 2011. Previously use in an R&D application. Over all dimensions: 31.2" (800 mm) long x 23.4" (600 mm) width x 23.4" (850 mm) high. Weight 220 lbs (100 kgs). Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

Used Aeromatic Aeroglide C1 120-65 RGC Fluid Bed Dryer – 5,000 lbs/hr, Stainless Steel, Natural Gas, Built 2005

Used- Aeromatic Aeroglide Dryer, Model C1 120-65 RGC. Up to 5000 lbs/hr (dependent on product); Drying Bed Area 350 sq. ft. drying area; 140 sq. ft. cooling bed area; 9'9" bed width; 152.4mm (6") max. first stage bed depth; 152.4mm (6") max. second stage (cooling) bed depth; Food grade 304 stainless steel construction; Natural gas fueled. 3/60/460V. SN 05153-02. Built 2005.

MFR: Aeromatic

Used Alfa Laval Aldec-G2-40 Solid Bowl Decanter Centrifuge – 316SS, 4000 RPM, 40 HP, Wastewater Application

Used Alfa Laval Aldec-G2-40 Solid Bowl Decanter Centrifuge 316SS, 4000 RPM, 30 HP, Wastewater Application. Maximum bowl speed 4000 RPM. Single row of lined cake discharges ports with wear liners, liquid plate dams, base, stainless steel casing, gearbox, Approx 40 HP, 460 Volt Baldor, main drive motor. Frame mounted on (4) legs. Mfg. 2007. Previously used in a wastewater treatment application.

MFR: Alfa Laval

Used Alfa Laval NX-414-B-31G Solid Bowl Decanter Centrifuge – Stainless Steel

Used- Alfa Laval NX-414-B-31G solid bowl decanter centrifuge, Stainless steel construction (product contact areas). Max bowl speed 4000 rpm, single row of lined solids discharge ports, base, casing, gearbox, feed pipe, control.

MFR: Alfa Laval

Alfa Laval NX-414-B-31G Decanter Centrifuge – High-Speed Solid-Liquid Separator

Used Alfa Laval NX-414-B-31G high-speed solid-liquid decanter centrifuge. Stainless steel product-contact areas. Maximum bowl speed 4000 rpm with single row of lined solids discharge ports; includes base, casing, gearbox, and feed pipe. Sold without stand and without controls. Removed from service in 2017 after use on organic soybean oil degumming

MFR: Alfa Laval

Used Dorr Oliver 12L Solid Bowl Decanter Centrifuge – Stainless Steel, 5000 RPM, Reconditioned

Used- Dorr Oliver 12L solid bowl Decanter Centrifuge, Stainless steel construction (product contact areas), max bowl speed 5000 rpm, 2.5" double lead conveyor, centripetal pump liquid discharge, base, stainless steel solids discharge chute, bowl cover, 35:1 ratio cyclo gearbox. 15 hp drive motor (460/3/60), vibration switch, belt guard. (Reported to be reconditioned and unused since)

MFR: Dorr Oliver

Used Carrier Fluid Bed Dryer – Model FTDAD/C2460S, Gas-Fired, 24" x 5.5' Heated Section, Carbon Steel

Used- Carrier Fluid Bed Dryer, Model FTDAD/C2460S. 24" wide x 56 heated section and 2 cooling section. Gas fired. Carbon steel wetted parts. 316 strokes. 890 rpm, 460 volt. Built 2012.

MFR: Carrier

Unused Triveni Steam Turbine Generator – Model TST-2100LR, 9.8 MW, 1800 RPM

Unused Triveni Steam Turbine Generator Model TST-2100LR, 9.8 MW, 1800 RPM. 38.57 bar at 395 degrees C (743 degrees F.) inlet, 57 t/h. 0.288 bar at 68.2 degrees C (154.76 degrees F.) exhaust. 19.7 bar at 316.1 degrees C (600.98 degrees F.) bleed. 1800 RPM. Built 2018.

Used Glatt CM 400 Stainless Steel Column Bin Blender | 500L, 300L & 100L Bins | 2016 | HMI Controlled | 480V

Used Glatt Model CM 400 Stainless Steel Column Container Blender is designed for efficient, gentle, and highly uniform blending of powders and granulated products for pharmaceutical, nutraceutical, food, and chemical processing applications. Features a stainless steel column design that allows for safe, ergonomic handling of interchangeable blending containers while minimizing product handling and the potential for cross-contamination. Included with the blender are one 500-liter stainless steel bin, one 300-liter stainless steel bin, one 100-liter stainless steel bin, and a wall-mounted control panel, providing flexibility for a variety of batch sizes. The container lifting and locking system is designed for reliable operation and repeatable blending performance, making this unit an excellent choice for facilities requiring versatile, high-quality powder blending. 2016 Glatt CM 400 stainless steel column bin blender with 500L, 300L, and 100L bins, designed for GMP grade powder blending in pharmaceutical, nutraceutical, and specialty chemical productionYear 2016. Serial No. PN 14724

MFR: Glatt

Buy Used Greerco W250H – High-Shear Emulsifier for Pharma, Food & Chemical Use

Used Greerco Model W250H Portable Colloid Mill, Stainless Steel. Designed for high-shear emulsifying, dispersing, and homogenizing of liquid and semi-solid products in pharmaceutical, cosmetic, food, and chemical applications. All product-contact parts are stainless steel for sanitary processing and corrosion resistance. Equipped with a 2 HP explosion-proof motor, the W250H offers reliable performance in environments requiring hazardous-duty equipment, while its portable frame enables easy movement across production areas for flexible, small-scale processing. Manufactured in 1998, Serial No. 3-04342.

MFR: Greerco