Food and Beverage Equipment

Clear
https://images.aaronequipment.com/ItemImages/Tanks/Stainless-5000-Gal-and-up/Unknown_13075038_aa.jpg

Stock No.:

13075038

Stainless Steel Tank 5,800 Gallons with Agitation

Used- Stainless Steel Tank 5,800 Gallons with Agitation. Overall approx 19'H x 9' dia Approx Vessel Dimensions: 13'T X 105". Approx Vessel Capacity: 5,800 Gallons.

MFR: Unknown

https://images.aaronequipment.com/ItemImages/Blanchers-Cookers/Blanchers-Cookers/Dodman-Ltd_50295002_aa.jpg

Stock No.:

50295002

Used Dodman Ltd. Model DST 010 Rotary Drum Blanching System

Used- Dodman Ltd. Model DST 010 Rotary Drum Blanching System. Consisting of: (1) Dodman Ltd. rotary drum rehydration blancher. Type DST 010, Stainless steel construction. Includes water regulating pump and manifold. On 4 legs. Overall dimensions: 7' 5" width x 18'5" long x 9'1" high (2300 mm width x 5700 mm long x 2800 mm high). (1) Dodman Ltd. rotary drum chiller, Type FPM 632, Stainless steel construction. 59" diameter x 124" straight side (1800 mm diameter x 3800 straight side) chilling drum. Includes water regulating pump and manifold. On 4 legs. New 1996. Overall dimensions: 78" width x 124" long x 85" high (2400 mm width x 3800 mm long x 2600 mm high). (3) Locker rectangle in/outfeed screens/sifters, stainless steel construction. 1400 rpm. Frame mounted on 4 legs. Previous used on vegetables. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible

MFR: Dodman Ltd.

https://images.aaronequipment.com/ItemImages/Centrifuges/Decanter/Sharples-P660_14191145_aa.jpg

Stock No.:

14191145

Used Sharples P-660 Decanter Centrifuge | 6000 RPM | Stainless Steel | 7.5 HP Main Drive | Mounted w/ Vibration Isolation

Used Sharples P-660 Decanter Centrifuge | 6000 RPM | Stainless Steel | 7.5 HP Main Drive | Mounted w/ Vibration Isolation. Stainless Steel. Main drive motor 7.5 hp 3/60/230-460 volts, fixed speed. Backdrive motor2 hp 3/60/208 230-460 volts fixed speed. 6000 rpm max speed, 95:1 gearbox. Mounted on table with vibration isolators.

MFR: Sharples

https://images.aaronequipment.com/ItemImages/Kettles/Stainless-Steel-0-499-Gallon/Vulcan-K6ETT_409352_aa.jpg

Stock No.:

409352

Pre-Owned Vulcan K6ETT Electric Counter Kettle | 6 Gal | 50 PSI

Used Vulcan-Hart Model K6ETT Electric Counter Tilting Kettle, 6 Gallon Capacity. Approximately 11.8" Diameter x 14-1/2" deep. Ellipsoidal bottom. 2/3 Jacketed rated 50psi at -20 to 300 degrees F. Frame mounted. National board# 21596, Serial# 46-3002235, Built 2011. 3/1PH 50/60HZ 8/10KW 208/240V requirements.

MFR: Vulcan

https://images.aaronequipment.com/ItemImages/Mixers/Plow-Mixer/Lodige-FKM600D_47890001_aa.jpg

Stock No.:

47890001

Lodige FKM600D Plow Mixer

Used- Lodige Model FKM600D batch-type plow mixer with 6 cubic feet working capacity and 10 cubic feet total capacity. 304 stainless steel, non-jacketed mixing chamber approximately 32" diameter x 50" long with 4" diameter shaft, (3) bolt-on plows, (2) bolt-on end scrapers, (2) 18" x 15-1/2" side access doors, and (2) 12" top openings. 9" x 7" bottom outlet with manually operated door and air-purge seals. Serial # 9046. Driven by an approximately 10 hp motor through Falk reducer. Includes control panel with Allen-Bradley PanelView 600 and SLC 5/04 CPU. Mounted on carbon steel stand. Suitable for dry powders, premixes, granular ingredients, spices, nutraceuticals, feed additives, chemical blends, and similar products.

MFR: Lodige

https://images.aaronequipment.com/ItemImages/Centrifuges/Decanter/Sharples-P-660_50058011_aa.jpg

Stock No.:

50058011

Used Sharples P-660 Super-D-Canter Centrifuge | 6000 RPM | New Motors & PLC Panel | Stainless Steel | 1-Year Warranty

Used Sharples P-660 Super-D-Canter Centrifuge | 6000 RPM | New Motors & PLC Panel | 1-Year Warranty, stainless steel construction (product contact areas, max bowl speed 6000 rpm, single lead conveyor w/welded hardfacing wear protection, base, casing, feed pipe, 95:1 planetary gearbox, (New) 10 HP Main Drive motor, (New) 5 hp backdrive motor, mounted plate w/ vibration Isolations. Mounted on approx. 4 stainless steel stand w/casters, safety guards, (New) programable logic control/drive panel. (Reconditioned with warranty)

MFR: Sharples

https://images.aaronequipment.com/ItemImages/Dryers-Drying-Equipment/Drum-Dryers/Buflovak-6-x-8-ADDD_54280001_ac.jpg

Stock No.:

54280001

Used Buflovak Atmospheric Double Drum Dryer | Model 6" x 8" ADDD | Pilot & R&D D

Used Buflovak Atmospheric Double Drum Dryer, Model 6" x 8" ADDD. 2 sq/ft Total drying surface area. Approximate 6" diameter x 8" face cored drum, rated 140-160 psig. Driven by a 1/2hp, 3/60/208-230/460 volt, 1725rpm motor through reducer 41.58:1 ratio. Blador VS drive. The dryer features twin chrome-plated drying drums with independent drum gap adjustment, stainless steel frame and safety guards, product feed trough with feed manifold, and doctor blade assembly. Compact unit is designed for drying slurries, purees, pastes, and other pumpable materials into flakes or powders and is well suited for R&D, product development, and small-scale production. Mounted on stainless steel frame. Job No. P1-00972, Serial# 2013-04, built 2013.

MFR: Buflovak

https://images.aaronequipment.com/ItemImages/Dryers-Drying-Equipment/Belt-Dryers/Belt-O-Matic-320B_51487002_aa.jpg

Stock No.:

51487002

Industrial Used Belt O Matic Belt Dryer Model 320B – High-Efficiency Continuous Drying

Used Belt O Matic Belt Dryer, Model 320B. 6 5" wide by 245" long; 3 phase/480 Volt/40 Amps;LP/natural gas; 5-7 PSI pressure Range; 1,000,000 BTU rating; 10,000 maximum CFM; 7.5 HP fan, maximum drying air temperature 250 degrees F. Built 2017. Last ran wet coffee grounds.

MFR: Belt-O-Matic

https://images.aaronequipment.com/ItemImages/Screeners-Sifters/Circular-Screeners/Sweco-LX60C168_10755166_aa.jpg

Stock No.:

10755166

Used Sweco LX60C168 60” Low Profile Screener – Single Deck, 3D Motion, Spare Motor & Springs, Built 2024

Used- Sweco Model LX60C168 60" Single Deck Low Profile Screener. The Sweco LX Low Profile Flow-Thru Separator allows for high capacity wet or dry scalping in a compact, low headroom design. Dual .69 hp motors mounted on opposite sides of the LX allow unrestricted flow of material and create the 3-D motion that allows oversize material full discharge, keeping the screen clear for maximum product flow. Low headroom requirements (as little as 15 inches) and straight flow design, allow the LX to fit easily into existing product lines without reworking the entire system. 12" center bottom outlet. Includes used spare motor, and six (6) spare springs. Unit is mounted on a 27" high base. No lid. " screen installed. 230-460/3/60-volt input. Serial# 554445-A-09/24, built 2024.

MFR: Sweco

https://images.aaronequipment.com/ItemImages/Kettles/Stainless-Steel-0-499-Gallon/Lee-Ind-60D7S_47147033_aa.jpg

Stock No.:

47147033

Used Lee 60 Gallon Stainless Steel Steam Jacketed Kettle Model 60D7S

Used Lee 60 Gallon Stainless Steel Cooking & Mixing Kettle, Model # 60D7S, Serial # 32675-1, built in 2004. Stainless steel 60 gallon kettle equipped with a single-action scraped-surface agitator with scrapers missing. Steam jacket is rated for 90 psi at temperatures up to 332 F, National Board number 9758. Kettle has a 1.5" diameter outlet with pneumatic discharge valve and is driven by a 1 HP, 3 phase, 60 cycle, 230/460 volt motor. Suitable for cooking, heating and mixing applications involving products that can be processed in a steam-jacketed, agitated kettle.

MFR: Lee Ind

https://images.aaronequipment.com/ItemImages/Kettles/Stainless-Steel-0-499-Gallon/Groen-RA-60_47147036_aa.jpg

Stock No.:

47147036

Used Groen RA-60 60 Gallon Stainless Steel Jacketed Cooking Kettle with Agitator

Used Groen 60 gallon stainless steel jacketed cooking and mixing kettle, Model # RA-60, Serial # 03588, National Board number 139462, equipped with a single-action scraped-surface agitator with scrapers missing, 125 psi steam jacket rated up to 353 F, 1.5" diameter outlet, and 1.5 HP, 3-phase, 60-cycle, 230/460-volt motor with final agitation speed of 34 RPM. Suitable for batch cooking, heating, blending, and mixing applications and products requiring low-speed scraped-surface agitation.

MFR: Groen

https://images.aaronequipment.com/ItemImages/Screeners-Sifters/Circular-Screeners/Sweco-LS60C_47852016_aa.jpg

Stock No.:

47852016

Used Sweco 60" Vibro Energy Separator – Model LS60C, Stainless Steel, Single Deck

Used- Sweco 60" Vibro Energy Separator, Model LS60C, Stainless Steel. Single Deck. Driven by a 2.5hp, 3/60/460 volt motor. Includes top cover. Serial# LS60-481-54. Incomplete.

MFR: Sweco

Sell Equipment

Have surplus equipment? We offer flexible options including direct purchase, consignment, or listing on our marketplace — all backed by trusted professionals.

Buy Used Equipment

Discover one of the world’s largest inventories of used processing and packaging equipment — ready to ship and backed by decades of industry expertise.

Auctions

Join global buyers and sellers at AIS-hosted auctions featuring top-quality surplus equipment from leading facilities around the world.