Food and Beverage Equipment

Used Patterson-Kelley 10 Cu Ft Double Cone Vacuum Dryer – Stainless Steel, Gear Motor, On Stands

Used- Patterson-Kelley Double Cone Vacuum Dryer, 10 Cubic Feet Working Capacity, Stainless steel construction, Maximum material density 125 pounds a cubic foot. Top port, bottom outlet with valve. Shell driven by an approximate 1/2hp gear motor. Mounted on stands. Sold as is, no jacket ratings.

MFR: Patterson Kelley

Used Groen TDH-40 Table Top Kettle – 40 Quart, Gas-Heated, Steam Jacketed

Used- Groen Table Top Kettle, Model TDH-40, 40 Quart Capacity, Stainless Steel. Approximate 16-1/2" diameter x 14" deep. Self-contained steam jacketed unit with natural gas heated steam source contained within unit. Input rated 52,000 btu / hr. 2/3 bottom jacket rate 50 psi at 300 degrees F. Manual tilting with pour lip. Mounted on a base. National Board# 12100, Serial# 1988-10.

MFR: Groen

Commercial Tabletop Kettle for Sale – Groen TDH-40, Natural Gas Heated

Used- Groen Model TDH-40 Table Top Kettle, 40 Quart Capacity, Stainless Steel. Approximate 16-1/2" diameter x 14" deep. Self-contained steam jacketed unit with natural gas heated steam source contained within unit. Input rated 52,000 btu / hr. 2/3 bottom jacket rate 50 psi at 300 degrees F. Manual tilting with pour lip. Mounted on a base. National Board# 13816, Serial# 1989-4. 1/60/110 Volt.

MFR: Groen

Commercial Stainless Steel Groen TDH-40 Kettle – 40 Qt, Self-Contained Steam

Used- Groen Stainless Steel Table Top Kettle, Model TDH/40-SP, 40 Quart Capacity. Approximate 16-1/2" diameter x 14" deep. Self-contained steam jacketed unit with natural gas heated steam source contained within unit. Input rated 52,000 btu / hr. 2/3 bottom jacket rate 50 psi at 300 degrees F. Manual tilting with pour lip. Mounted on a base. National Board# 32385, Serial# 32385. 1/60/110 Volt.

MFR: Groen

Used Patterson-Kelley 10 Cu. Ft. 304 Stainless Steel Twin Shell V-Blender – 135 Lb./Cu. Ft. Density Rating

Used- Twin Shell (V-Blender) - Patterson Kelly 10 Cubic Foot 304 Stainless Steel. Rated maximum material density 135 lbs./cu. Ft. Has (2) 18" top charge ports and a 8" bottom discharge with a butterfly valve. Interior has milled finish. Unit is direct driven by approximately 2HP right angle geardrive with an electric brake. Has Dodge pillow block bearings. Mounted on carbon steel stand giving 48" from bottom valve to floor. Overall dimensions 91" long X 30.5" wide X 101" tall.

MFR: Patterson Kelley

Unused LACT Hydraulic Pump Unit | 200 GPM @ 45 PSI | Viking Q4127A Pump | 10 HP Motor | 3” Stainless Piping | Static Mixer, Valves & Meter | Skid-Mounted | Built 2021

Unused- LACT Hydraulic Pump Unit. 200 GPM flowrate at 45 PSI discharge pressure. 3" stainless steel piping. Includes Viking Q4127A Pump, driven by a 10hp 3/60/460v 1800rpm motor. static mixer, valves, and meter. Skid mounted. Built 2021.

Used Premier Mill ESD/V-10/5 Stainless Steel Media Mill – 10-Liter Grinding Chamber, 10 HP Drive

Used- Premier Mill Corp. Media Mill. Model ESD/V-10/5, Stainless steel. Manufactured in May 2000. 208 V power with a 10 HP drive motor and a 5 HP pump motor. In Premier's ESD nomenclature, the "10" designates the grinding chamber volume of 10 liters (2.64 U.S. gallons) rather than a batch size, since the machine is a continuous-flow mill and has no fixed batch capacity. Throughput and batch size depend on the product viscosity and the particle fineness required, with the mill paired to a feed or recirculation tank 10100 gallons for lab and pilot work, and 50300 gallons for production recirculation. Floor mounted construction and configured for high-shear mixing and dispersion with recirculation through the product loop, suitable for paints, inks, coatings, adhesives, chemicals, and specialty product formulations in laboratory, pilot, and production service

MFR: Premier

Used Summerlot Engineered Products Dryer – 316 Stainless Steel

Used- Summerlot Engineered Products Dryer, 316 Stainless Steel. Cantilevered S/C. 12" long x 6" wide feed hopper, with a 3-3/4" diameter x 48" long screw, 3/4" pitch. Driven by a 1hp, 3/60/208-230/460 volt, 1755 rpm motor. Approximately 10" diameter x 136" long dryer vessel, with (4) fixed baffles. Driven by a 2hp, 3/60/230/460 volt, 1140 rpm motor through reducer, 5.76:1. Approximate 8" diameter discharge with a Flowseal valve. 36" Discharge height. Serial# 88211.

MFR: Summerlot

Used Zanchetta (IMA) T Tote Bin

Used- Zanchetta (IMA) T Tote Bin, approximately 10.5 cubic feet (300 liter) (79.2 Gallons), Stainless Steel. 40" diameter x 4" straight side x 24" cone bottom. 15 top opening, 6" discharge. Mounted on a stainless steel frame.

MFR: IMA

Used 10.5 cubic foot Zanchetta T Tote Bin

Used- Approximately 10.5 cubic foot Zanchetta T Tote Bin (300 liter) (79.2 Gallons), Stainless Steel. 40" diameter x 4" straight side x 24" cone bottom. 15 top opening, 6" discharge. Mounted on a stainless steel frame.

MFR: IMA

Used 300 Liter Industrial T Tote Bin, Made by Zanchetta

Used- 300 Liter Industrial T Tote Bin, Made by Zanchetta, approximately 10.5 cubic feet (79.2 Gallons), Stainless Steel. 40" diameter x 4" straight side x 24" cone bottom. 15 top opening, 6" discharge. Mounted on a stainless steel frame.

MFR: IMA

Used Drais Mannheim Plow Mixer/Dryer – Type TK 400-Turbu Kneter, 400L, 321 Stainless Steel

Used- Drais Mannheim Plow Mixer/Dryer, Type TK 400-Turbu Kneter. Material of construction is 321 (1.4541) stainless steel on product contact parts. Stainless steel mixing body. Total capacity is 14.12 cubic feet (400 liter), Maximum working capacity 10.6 cubic feet (300 liter). Minimum working capacity 4.23 cubic feet (120 liter). Stainless steel double jacketed for heating/cooling rated at 90 psi (6 bar). Heating/cooling surface approximately 17 square feet (1.7 m2). Inside rated for 0 psi at 122 degree F (50 degree C). FM I Becker plows driven via a Stimrad-Aufsteckgetribe gearbox, Type H 2HH 5A by an 82.5HP/55Kw-400 volt AC/50cycle/3PH Non EX motor, Type K 11 R 250 M 4 KT-200H. Mixing speed 175 RPM. Twin screw feeder, driven by 0.55 KW / 0.83 HP - 400 volt AC / 50 cucle / 3 Ph motor, 3.9" (100 mm) bottom outlet valve. Inspection door with counter weights. Overall dimensions: 12' long x 34" width x 54" high (3700 mm long x 1050 mm width x 1650 mm high). Weight 5192 pounds (2360 kgs) empty. Serial # 55918. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Draiswerke