Food and Beverage Equipment

Unused Fulton VSRT-125 Steam Boiler | 125 HP Vertical Tubeless High Efficiency Boiler

2024 Fulton VSRT-125 125 HP Vertical Tubeless Steam Boiler, 4,313 Lb/Hr, 150 PSI. Features a two-pass vertical spiral rib heat exchanger, fully water-backed pressure vessel, and refractory-free design with 193.2 square feet of heating surface. Rated at 125 boiler horsepower with approximately 4,313 lb/hr steam capacity, 4,185 MBH steam output, and 4.99 MMBTU/hr fuel input. Maximum allowable working pressure of 150 PSI with operating pressure range of 15150 PSI. Designed for thermal efficiency up to 86% and steam quality of approximately 99.75%. Equipped with fully modulating, linkage-free burner with 10:1 turndown ratio and variable-speed combustion air blower. VSRT series supports natural gas, propane, and dual-fuel configurations, with NOx emissions below 20 ppm in specified configurations. Features 0.375" minimum vessel wall thickness, 4" steam outlet, 8" combustion air inlet, and 10" flue outlet. Approximate overall dimensions with trim: 100" D x 75" W x 140" H. Approximate shipping weight 11,800 lbs and operating weight 18,975 lbs. Serial #F10116417A, National Board #11514. Manufactured in 2024. Suitable for industrial steam generation in food processing, beverage production, pharmaceutical manufacturing, chemical processing, sterilization, cleaning, and other applications requiring high-quality process steam. **Installed and tested, but not used afterward**

MFR: Fulton

Used Furis FRS-590 Automatic Bath Bomb Packaging Line – 150 PPM – PVC, POF, PE Films

Used- Furis Machinery Automatic Bath Bomb Packaging Line, Model FRS-590. Consisting of Automatic feeder; Packing machine; and Shrink tunnel. Set up for 40-75mm bath bombs. Rated at speeds of 30-150 pieces/min. 450mm maximum film width. PVC, POF, & PE film types. Previously used for bath bombs.

Used GEA Powerpak 540 Thermoforming Packaging Machine – Rigid/Tyvek, Medical Grade

Used- GEA Powerpak 540 Thermoforming Packaging Machine; Web width of machine - 540mm; Packaging material - Forming: Rigid, PETG up to .040"; Non forming - Tyvek; Dieset configuration - 4- up, (2tracks x 2row) 3- up, (3tracks x 1row); 10 to 12 cycles per minute; 208 Volts, 3 Phase, 60 Cycle; Compressed Air -100 PSI;Water - 45 Liters per Hour/12 Gallons per Hour; Forming Web Width - 540mm +2 / -0; Non- Forming Web Width - 530mm + 2 -1mm; Film Cores- 3" and 6"; Forming Film Roll Size - 500mm Max OD; Non Forming Roll Size - 500mm Max OD; Vacuum Pumps - Busch 1144 BV forming vacuum pump; Mfg. 2016; Last used on Medical Products.

Unused GEA Westphalia RSI-300-01-072 Vertical Degumming Separator Centrifuge

Unused GEA Westphalia Vertical Degumming Separator Centrifuge, Model RSI-300-01-072. 304 Stainless steel construction. 80 psi design pressure at 250 degrees F.(barg). 470 gpm design flow. 55.3 lb/ft^3 fluid density, 12.6 cP fluid viscosity. 75 HP motor. Self Cleaning Disc Stack. 4500 RPM maximum admissible rated bowl speed. 1.1 kg/dm^3 maximum admissible density of feed product, Heavy liquid 1.1 kg/dm^3, Solids 1.3 kg/dm^3. 5/90 degrees C minimum/maximum temperature of feed product. 45/50 m^3/h minimum/maximum throughput. Built 2021.

MFR: GEA Westfalia

Used GEA Westfalia Desludger Disc Centrifuge – Model MSA-90-01-076

Used GEA Westfalia Desludger Disc Centrifuge Model MSA-90-01-076, stainless steel construction (product contact areas), max bowl speed 5920 rpm, light and heavy phase centripetal pump liquid discharge, 18.5 kW drive motor (220-380/3/50), control panel. Previously used in a dairy cream application. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible

MFR: GEA Westfalia

GEA Westfalia SA7-06-076 Desludger Disc Centrifuge. Used.

Used-GEA Westfalia SA7-06-076 Desludger Disc Centrifuge, 316 stainless steel construction (product contact areas), maximum bowl speed 8400 rpm, clarifier design (liquid/solids separation), centripetal pump liquid discharge, direct drive, by an approximate 6.6 hp drive motor, control panel. Frame mounted. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible

MFR: GEA Westfalia

GEA Westfalia Separator, used.

Used- GEA Westfalia Separator; Model OSD 2-02-137; 10,000 RPM; 1 Liter Volume; .5 Liter Solids holding. 0.8 kW(1.07hp) 3/50/60 Hz motor. Maximum Separating temperature 212 degrees F; 25" Long x 25" Wide x 33" High; Approximately 154 lbs. Last used for R&D purposes. Serial# 9077-113

MFR: GEA Westfalia

Used – GEA Westfalia MSD-60-01-076 Desludger Disc Centrifuge – Stainless Steel, Dairy Application

Used GEA Westfalia MSD-60-01-076 Desludger Disc Centrifuge Stainless Steel, Dairy Application, max bowl speed 6540 rpm, separator design, 11 kW (14.75hp) drive motor (220-380/3/50). Previously used in a dairy cream application. Previously used in a dairy/cheese application. Overall dimensions: 1250 mm (4) x 950 mm (29") x 1500 mm (49") high. Weight 765 kgs (1683 LBS).

MFR: GEA Westfalia

Used GEA Westfalia MSA-40-06-076 Desludger Disc Centrifuge

Used- GEA Westfalia MSA-40-06-076 Desludger Disc Centrifuge. Stainless steel construction (product contact areas, max bowl speed 4800 rpm, clarifier design (liquid/solids separation), centripetal pump liquid discharge, 25 hp drive motor 230/460/3/60. Last used to clarify apple juice. .

MFR: GEA Westfalia

Unused GEA Westfalia FSE300 Disc-Stack Centrifuge | 9,000 L/hr | XP-Rated | 2024 Build | CIP & Skid-Mounted

Unused GEA Westfalia Disc-Stack Centrifuge, Model FSE300, with 316 stainless steel product contact surfaces. Rated 9,000 L/hr hydraulic capacity with 4,5004,800 RPM bowl speed and 24-liter solids space. Equipped with semi-continuous piston solids ejection, hydro-hermetically sealed low-shear inlet, self-cleaning bowl for fully automatic CIP, and 55 kW (73.75 HP) motor. XP-area rated unit includes control panel and skid-mounted construction. Built 2024. Suitable for clarification and liquid-solid separation of food, beverage, fermentation, chemical, pharmaceutical, biotechnology, and other process liquids.

MFR: GEA Westfalia

Used GEA Westfalia Disc Centrifuge FSE 10-06-077 for Sale – Stainless Steel, 12,000 RPM

Used GEA Westfalia Disc Centrifuge, Type FSE 10-06-077. Stainless steel construction (product contact areas). 12,000 rpm max. bowl speed. Clarifier design (liquid/solids separation), centripetal pump liquid discharge, direct drive, approx. 5.5 HP drive motor (3/60/460V.) Control system w/PLC. SN 1741-517. Built 2022.

MFR: GEA Westfalia

Used Westfalia SA-7-01-576 Desludger Disc Centrifuge – 316 SS, 8,520 RPM Separator

Used- Westfalia SA-7-01-576 Desludger Disc Centrifuge. 316 Stainless steel construction (product contact areas), max bowl speed 8520 rpm, separator design (liquid/liquid/solids separation), 4 kw (5.36hp) 380/3/50 drive motor. Water harness, operators control panel, misc. tools.

MFR: GEA Westfalia