Food and Beverage Equipment

Used RefTec Shark R134a Recovery & Recycling System – AHRI 700 Standard, Single-Pass Reclaim

Used- RefTec Shark Recovery and Recycling System. Cleans dirty R134a back to ARI 700 standard reclaimed gas in a single pass. Removes oil, acids, moisture and hard particulates from even the dirtiest of gases. For every 1% of contamination the Shark Reclaim Unit removes, 2% of efficiency has been restored. R134a Rates : 5.34lbs/min (2.42kgs/min) direct liquid; 2.89lbs/min (1.31kgs/min) vapor; 2.03lbs/min (.92kgs/min) recycle; Certified by AHRI 740, ETL, UL-1963.

Used GEA Westfalia UCD 205-00-02/32c Decanter Centrifuge – 5500 RPM, 2-Phase, Stainless Contact, WWT Application – 2011

Used- GEA Westfalia UCD 205-00-02/32c Decanter Centrifuge. Stainless steel construction (product contact areas), max bowl speed 5500 rpm, 2 phase separation (liquid/solids) design, single row of lined cake solids discharge ports, base, casing, gearbox. On 4 legs. Previously used in an WWT application. Serial# 8860-355, built 2011. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Westfalia

Pre-Owned Dispermat CA40-C1 Lab Dissolver – 50?mm Saw Disc with Control Panel

Used VMA-Getzmann Lab Dissolver, Type Dispermat CA40-C1. Stainless steel in product contact parts. 11.7" (300 mm) shaft. 1.95" (50 mm) dia. saw disc. Complete with control panel. Serial # A1000637. New year 2011. Previously use in an R&D application. Over all dimensions: 31.2" (800 mm) long x 23.4" (600 mm) width x 23.4" (850 mm) high. Weight 220 lbs (100 kgs). Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

Used SPX-APV Homogenizer | Model R185Q-54.140 | 6000 PSI | Stainless Steel | Available 2026

Used SPX-APV Homogenizer | Model R185Q-54.140 | 6000 PSI | Stainless Steel | Available 2026. Max pressure 400 BAR (6000 PSI). Incl. control panels, pump and additional infrastructure. Last used in fruit juice concentrate operation. Serial # J5-18.205. New year 2018. Most equipment is in production operation during 2025 and will become available for collection in 2026 Definitive date to be arranged. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: SPX

Used APV Homogenizer, Model BT.30.81 | 600 BAR / 9000 PSI | Stainless Steel | High-Pressure Juice Processing

Used APV Homogenizer, Model BT.30.81 | 600 BAR / 9000 PSI | Stainless Steel | High-Pressure Juice Processing. Max pressure 600 BAR (9000 PSI). Incl. pump and additional infrastructure. Last used in fruit juice concentrate operation. Serial # 1-01.164. New year 2001. The unit is in production operation during 2025 and will become available for collection in 2026 definitive date to be arranged. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: APV

Used Aeromatic Aeroglide C1 120-65 RGC Fluid Bed Dryer – 5,000 lbs/hr, Stainless Steel, Natural Gas, Built 2005

Used- Aeromatic Aeroglide Dryer, Model C1 120-65 RGC. Up to 5000 lbs/hr (dependent on product); Drying Bed Area 350 sq. ft. drying area; 140 sq. ft. cooling bed area; 9'9" bed width; 152.4mm (6") max. first stage bed depth; 152.4mm (6") max. second stage (cooling) bed depth; Food grade 304 stainless steel construction; Natural gas fueled. 3/60/460V. SN 05153-02. Built 2005.

MFR: Aeromatic

Used Alfa Laval Aldec-G2-40 Solid Bowl Decanter Centrifuge – 316SS, 4000 RPM, 40 HP, Wastewater Application

Used Alfa Laval Aldec-G2-40 Solid Bowl Decanter Centrifuge 316SS, 4000 RPM, 30 HP, Wastewater Application. Maximum bowl speed 4000 RPM. Single row of lined cake discharges ports with wear liners, liquid plate dams, base, stainless steel casing, gearbox, Approx 40 HP, 460 Volt Baldor, main drive motor. Frame mounted on (4) legs. Mfg. 2007. Previously used in a wastewater treatment application.

MFR: Alfa Laval

Used Alfa Laval NX-414-B-31G Solid Bowl Decanter Centrifuge – Stainless Steel

Used- Alfa Laval NX-414-B-31G solid bowl decanter centrifuge, Stainless steel construction (product contact areas). Max bowl speed 4000 rpm, single row of lined solids discharge ports, base, casing, gearbox, feed pipe, control.

MFR: Alfa Laval

Alfa Laval NX-414-B-31G Decanter Centrifuge – High-Speed Solid-Liquid Separator

Used Alfa Laval NX-414-B-31G high-speed solid-liquid decanter centrifuge. Stainless steel product-contact areas. Maximum bowl speed 4000 rpm with single row of lined solids discharge ports; includes base, casing, gearbox, and feed pipe. Sold without stand and without controls. Removed from service in 2017 after use on organic soybean oil degumming

MFR: Alfa Laval

Used Dorr Oliver 12L Solid Bowl Decanter Centrifuge – Stainless Steel, 5000 RPM, Reconditioned

Used- Dorr Oliver 12L solid bowl Decanter Centrifuge, Stainless steel construction (product contact areas), max bowl speed 5000 rpm, 2.5" double lead conveyor, centripetal pump liquid discharge, base, stainless steel solids discharge chute, bowl cover, 35:1 ratio cyclo gearbox. 15 hp drive motor (460/3/60), vibration switch, belt guard. (Reported to be reconditioned and unused since)

MFR: Dorr Oliver

Used Carrier Fluid Bed Dryer – Model FTDAD/C2460S, Gas-Fired, 24" x 5.5' Heated Section, Carbon Steel

Used- Carrier Fluid Bed Dryer, Model FTDAD/C2460S. 24" wide x 56 heated section and 2 cooling section. Gas fired. Carbon steel wetted parts. 316 strokes. 890 rpm, 460 volt. Built 2012.

MFR: Carrier

Unused Triveni Steam Turbine Generator – Model TST-2100LR, 9.8 MW, 1800 RPM

Unused Triveni Steam Turbine Generator Model TST-2100LR, 9.8 MW, 1800 RPM. 38.57 bar at 395 degrees C (743 degrees F.) inlet, 57 t/h. 0.288 bar at 68.2 degrees C (154.76 degrees F.) exhaust. 19.7 bar at 316.1 degrees C (600.98 degrees F.) bleed. 1800 RPM. Built 2018.