Cosmetics Equipment

Used Oakes model 14MC20 high shear, continuous, rotor and stator type pin mill mixer. Equipped with radial flow disc with high shear action consisting of front / rear stator and 20 hp Reeves variable...

Used-Oakes model 14MC20 high shear, continuous, rotor and stator type pin mill mixer. Equipped with radial flow disc with high shear action consisting of front / rear stator and 20 hp Reeves variable speed drive. The mix head is jacketed. The mix head has 1.5" triclamp connections. Equipped with a size 30 Waukesau positive displacement pump with 1.5" triclamp connections. All mounted in a stainless steel skinned cabinet on casters. 230/460 vac 3 ph power required. Oakes mixers are designed to homogenize or aerate slurry to produce a highly uniform and stable cell structure. OAD 41" wide x 74" long x 77.5" tall.

MFR: Oakes

Used Sweco White Water Filter. Model WWF30-3L. Serial Number 76835-C-1194. 304 stainless steel construction. Filter has a high flow rate, centrifugal screening of suspended solids down to 500 mesh (2...

Used-Sweco White Water Filter. Model WWF30-3L. Serial Number 76835-C-1194. 304 stainless steel construction. Filter has a high flow rate, centrifugal screening of suspended solids down to 500 mesh (25 Microns)(May require change of screens), a flow rate of 1350-600 GPM, (9) 10"x 20" screen panels, (9) 10" x 10" screen panels, (1) 8" infeed flanged connector, (1) 12" outfeed flanged connector, and (1) 8" concentrate flanged connector. Filter was new in 1994. Have manual on file. Good condition.

MFR: Sweco

Used 250 gallon APV Crepaco Dixie style medium shear mixer. Stainless steel food grade construction. Vessel is 40" diameter x 60" straight side length with approximately 6" dished top and bottom. The...

Used-250 gallon APV Crepaco Dixie style medium shear mixer. Stainless steel food grade construction. Vessel is 40" diameter x 60" straight side length with approximately 6" dished top and bottom. The bottom has a 3" and a 4" tri clamp ports. The top has one 18" manway w/lid. One sprayball (1.5" tri clamp) One 2" connection to the breather. Two each 1.5" and Five each 2" tri clamp connections. It has the standard 3 wheel, centrifugal fan type impellers. The drive is missing. The vessel is mounted in a stainless steel bar grate platform that is 65" x 113.5" x 57.5" high. The over all dimensions are 65"w x 113.5"l x 100.5" tall. Serial number K-0149. Good condition.

MFR: APV/Crepaco

Used Carman Vibrating Fluid Bed Dryer, also including a Blower Unit and an Electric Process Air Heater. Carman Fluid Bed Model FB-50, equipped with 2 vibrators of 1 hp, Single zone, 11" wide x 72" ...

Used Carman Vibrating Fluid Bed Dryer, also including a Blower Unit and an Electric Process Air Heater. Carman Fluid Bed Model FB-50, equipped with 2 vibrators of 1 hp, Single zone, 11" wide x 72" long perforated bed. The Unit overall dimensions are 44'' x 93'' x 75''. The serial Number is FB-10522. There is no ductwork, controls stands or springs included. Stainless steel contact parts. The Supply-Side Equipment: - New York Blower Co. series 20GI FAN 194 LS. Driven by a 15hp Weg Motor, 1760 rpm. Power required 208-230/ 460 vac3. The Unit dimensions are 61" x 62" x 46". - Process Air Heater CAT no. 164x221428. Has an outlet Temperature of 575 F. 150kw. Power required 460 vac3. The Unit overall dimensions are 50" x 100" x 45". All these items are insulated and appear to be in good condition.

MFR: Carman

Used Eiger Machinery model 40L SSE EXP horizontal media mill has a 40 L carbon steel milling chamber driven by a 40 hp, 1165 rpm motor that requires 230/460 vac, 3 ph electricity. Motor is tagged for...

Used-Eiger Machinery model 40L SSE EXP horizontal media mill has a 40 L carbon steel milling chamber driven by a 40 hp, 1165 rpm motor that requires 230/460 vac, 3 ph electricity. Motor is tagged for hazardous locations. Includes operating controls and diaphragm pump. Overall dimensions are 57" w x 36" l x 75" h. Serial no. 1430.

MFR: Eiger

Used Eiger Machinery model ABM 40H EXP horizontal media mill has a 40 L carbon steel milling chamber driven by a 40 hp, 1175 rpm motor that requires 230/460 vac, 3 ph electricity. Motor is tagged for...

Used-Eiger Machinery model ABM 40H EXP horizontal media mill has a 40 L carbon steel milling chamber driven by a 40 hp, 1175 rpm motor that requires 230/460 vac, 3 ph electricity. Motor is tagged for hazardous location. Includes operating controls and diaphragm pump. Overall dimensions are 64" w x 36" l x 80" h. Serial no. 06122.

MFR: Eiger

Used Premier Mill Corp. horizontal media mill, model ML1.5 The mill has a 1.5 Liter capacity, Jacketed stainless steel chamber, rated 0-20 liters/hr output, with pump, mounted in self contained hous...

Used Premier Mill Corp. horizontal media mill, model ML1.5 The mill has a 1.5 Liter capacity, Jacketed stainless steel chamber, rated 0-20 liters/hr output, with pump, mounted in self contained housing. Driven by a 5 hp main motor and a 1/3 hp pump motor. Required voltage 230 V ph3, 60Hz. Serial number HML 1.5.91403.98.0228. Overall 27" x 37" x 43".

MFR: Premier

Used Becker Pumps Corp oil flooded rotary vane vacuum pump. Model U4.400 SA/K. Vacuum pump has a pumping speed of 283 cfm and a vacuum to 2.5 Torr. Pump has a 3" NPT inlet and a 4" NPT outlet. The pu...

Used-Becker Pumps Corp oil flooded rotary vane vacuum pump. Model U4.400 SA/K. Vacuum pump has a pumping speed of 283 cfm and a vacuum to 2.5 Torr. Pump has a 3" NPT inlet and a 4" NPT outlet. The pump is driven by a 15 hp 1165 rpm motor. Serial number 1469721. Requires 230/460 vac 3 phase electrical supply.

Used Stokes Vacuum Shelf Dryer, Model #338-4. Max operating pressure is 50 PSI. The dryer has 14 steam ports on 3.5" vertical centers and the door has one-6” opening, one -9" diameter sight glasses, ...

Used-Stokes Vacuum Shelf Dryer, Model #338-4. Max operating pressure is 50 PSI. The dryer has 14 steam ports on 3.5" vertical centers and the door has one-6” opening, one -9" diameter sight glasses, and one-8” opening. There are no shelves included. There are also two inspection windows missing. Inside dimensions 49.5" wide x 49.25" tall x 45.5" deep. Serial # P-77304. Overall 70” x 66” x 80”. This would make a nice vacuum chamber.

MFR: Stokes

Used ACS Ancaster Conveying Systems model MD 8" QC-R-SS stainless steel sanitary rotary air lock. It has (8) 3" talll vanes on its rotor. The rotor assembly is polished to 150-180 grit finish. It ha...

Used-ACS Ancaster Conveying Systems model MD 8" QC-R-SS stainless steel sanitary rotary air lock. It has (8) 3" talll vanes on its rotor. The rotor assembly is polished to 150-180 grit finish. It has 8" inside diameter inlet/outlet flanges. Quick clean design has removable end that slides on guides for easy clean out. Also has air purge seals. Driven by 1 hp WEG motor and gearbox assembly that turns vanes at 20 rpm. Requires 208-230/460 vac 3 ph electrical supply. Good Condition. Low hours, project cancelled.

Used ACS Ancaster Conveying Systems model MD 8" QC-R-SS stainless steel sanitary rotary air lock. It has (8) 3" talll vanes on its rotor. The rotor assembly is polished to 150-180 grit finish. It ha...

Used-ACS Ancaster Conveying Systems model MD 8" QC-R-SS stainless steel sanitary rotary air lock. It has (8) 3" talll vanes on its rotor. The rotor assembly is polished to 150-180 grit finish. It has 8" inside diameter inlet/outlet flanges. Quick clean design has removable end that slides on guides for easy clean out. Also has air purge seals. Driven by 1 hp WEG motor and gearbox assembly that turns vanes at 20 rpm. Requires 208-230/460 vac 3 ph electrical supply. Good Condition. Low hours, project cancelled.

Used VAV Scan vibratory Conveyor. Stainless steel construction. Conveyor pipe of 16" diameter and 148" long.Has clean openings on boths ends. The unit has three 6" inlets/outles and two 12" inlets/...

Used VAV Scan vibratory Conveyor. Stainless steel construction. Conveyor pipe of 16" diameter and 148" long.Has clean openings on boths ends. The unit has three 6" inlets/outles and two 12" inlets/outlets. ith 2 vibro motor, 1200 rpm each. Has a support floor mounting with 4 springs and 4 schocks absorbant. 38" in the tall end and 10" in the short end. The unit number is : 29751 and year: 1991.